WayneC1972
Dabbler
- Joined
- Oct 19, 2015
- Messages
- 22
As of late I am having an issue where my SMB shares don’t seem to remain persistent. I will connect to a share, after a few minutes of browsing the drive, the connection will freeze and disappear. After a minute or two I am then able to access the shares once again. This is my current build.
Is it time to spend $$$ and upgrade motherboard, processor, memory and case? Or am I missing something other than the fact that I am running FreeNAS Corral. I plan to move to FreeNAS 11, but after all of the work It took to move to corral and get everything working I am not overly enthusiastic about having to rebuild FreeNAS again.
Case: Lian Li PC-Q25B
Motherboard: ASRock E3C226D2I Mini ITX Server Motherboard LGA 1150 Intel C226 DDR3 1600/1333
CPU:1 x Intel Xeon E3-1225v3 CPU 3.20GHz Quad Core SR1KX LGA1150 Processor
Memory:Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered DDR3 1600 (PC3 12800) Server Memory Model CT2KIT102472BD160B
Hard Drive(s):6 x WD Red 3TB NAS Hard Drive: 1 to 8-bay RAID Hard Drive: 3.5-inch SATA 6 Gb/s, IntelliPower, 64MB Cache WD30EFRX
OS Drive:2xSanDisk Ultra Fit 32Gb USB 3.0 Flash Drives - Mirrored
SATA Controller Card:IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid SI-PEX40064
Plex Drives: 1 x PNY 120GB (CS1311 SSD); 1 x Sandisk 120GB SSD plus -MIRRORED
Powersupply:Corsair RM Series 450-Watt ATX/EPS 80PLUS Gold-Certified Power Supply CP-9020066-NA
Additional NIC: Dell Intel Quad Port Gigabit Ethernet Card YT674 PCIe NIC Server
Battery Backup: CyberPower 1000PFCLCD
CPU:1 x Intel Xeon E3-1225v3 CPU 3.20GHz Quad Core SR1KX LGA1150 Processor
Memory:Crucial 16GB (2 x 8GB) 240-Pin DDR3 SDRAM ECC Unbuffered DDR3 1600 (PC3 12800) Server Memory Model CT2KIT102472BD160B
Hard Drive(s):6 x WD Red 3TB NAS Hard Drive: 1 to 8-bay RAID Hard Drive: 3.5-inch SATA 6 Gb/s, IntelliPower, 64MB Cache WD30EFRX
OS Drive:2xSanDisk Ultra Fit 32Gb USB 3.0 Flash Drives - Mirrored
SATA Controller Card:IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid SI-PEX40064
Plex Drives: 1 x PNY 120GB (CS1311 SSD); 1 x Sandisk 120GB SSD plus -MIRRORED
Powersupply:Corsair RM Series 450-Watt ATX/EPS 80PLUS Gold-Certified Power Supply CP-9020066-NA
Additional NIC: Dell Intel Quad Port Gigabit Ethernet Card YT674 PCIe NIC Server
Battery Backup: CyberPower 1000PFCLCD
Plex
Plexpy
Couchpotato
Nzbget
Sonarr
Transmission
pihole
Plexpy
Couchpotato
Nzbget
Sonarr
Transmission
pihole
Is it time to spend $$$ and upgrade motherboard, processor, memory and case? Or am I missing something other than the fact that I am running FreeNAS Corral. I plan to move to FreeNAS 11, but after all of the work It took to move to corral and get everything working I am not overly enthusiastic about having to rebuild FreeNAS again.
