~# zpool status
pool: NASBOX01
state: DEGRADED
scrub: scrub completed after 5h21m with 0 errors on Mon Jan 12 06:47:42 2015
config:
NAME STATE READ WRITE CKSUM
NASBOX01 DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
ada1p2 ONLINE 0 0 0
ada2p2 ONLINE 0 0 0
replacing DEGRADED 0 0 0
9878694156672902476 OFFLINE 0 0 0 was /dev/ada3p2/old
ada3p2 ONLINE 0 0 0
ada4p2 ONLINE 0 0 0
errors: No known data errors
What do I ned to do to remove the degraded status so NASBOX01 is ONLINE?
History:
I removed ada3p2 from the pool, since I did not have a spare SATA port I added a new drive of same capacity into the same SATA port as the failing drive and resilvered. It completed but now I am still left with a degraded status. when I use the -x it tells me the pool is healthy. How do I fix this?
pool: NASBOX01
state: DEGRADED
scrub: scrub completed after 5h21m with 0 errors on Mon Jan 12 06:47:42 2015
config:
NAME STATE READ WRITE CKSUM
NASBOX01 DEGRADED 0 0 0
raidz1 DEGRADED 0 0 0
ada1p2 ONLINE 0 0 0
ada2p2 ONLINE 0 0 0
replacing DEGRADED 0 0 0
9878694156672902476 OFFLINE 0 0 0 was /dev/ada3p2/old
ada3p2 ONLINE 0 0 0
ada4p2 ONLINE 0 0 0
errors: No known data errors
What do I ned to do to remove the degraded status so NASBOX01 is ONLINE?
History:
I removed ada3p2 from the pool, since I did not have a spare SATA port I added a new drive of same capacity into the same SATA port as the failing drive and resilvered. It completed but now I am still left with a degraded status. when I use the -x it tells me the pool is healthy. How do I fix this?