Voilà le résultat de dmesg, j'ai pas l'impression qu'il y ait quelquechose. Pour le firmware different tu sais si c'est simple à mettre à jour car là je ne sais pas ou télécharger la P20 et comment faire la maj.
Code:
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.1-RELEASE-p1 n245406-814eb095751 TRUENAS amd64
FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0. 0-0-gd7b669b3a303)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E3-1246 v3 @ 3.50GHz (3492.14-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SD BG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE, OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,I NVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33092706304 (31559 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM SLIC-WKS>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1 6 5 2 7 4 3
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
padlock0: No ACE support.
acpi0: <HPQOEM SLIC-WKS>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xee000000-0xeeffffff,0 xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xef520000-0xef52ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
uart2: <Intel Lynx Point KT Controller> port 0xf0a0-0xf0a7 mem 0xef53a000-0xef53 afff irq 19 at device 22.3 on pci0
uart2: Using 1 MSI message
em0: <Intel(R) I217-LM LPT> port 0xf040-0xf05f mem 0xef500000-0xef51ffff,0xef539 000-0xef539fff irq 20 at device 25.0 on pci0
em0: EEPROM V0.13-4
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 50:65:f3:39:aa:d0
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xef538000-0xef5383ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2004> port 0xd000-0xd0ff mem 0xef4c0000-0xef4 c3fff,0xef480000-0xef4bffff irq 16 at device 0.0 on pci2
mps0: Firmware: 17.00.01.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,Even tReplay,HostDisc>
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) I210 (Copper)> mem 0xef200000-0xef2fffff,0xef300000-0xef303fff i rq 17 at device 0.0 on pci3
igb0: EEPROM V3.16-0 Option ROM V1-b304-p0 eTrack 0x800004ff
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 4 RX queues 4 TX queues
igb0: Using MSI-X interrupts with 5 vectors
igb0: Ethernet address: a0:36:9f:85:ee:20
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib5
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xef537000-0xef5373ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083, 0xf070-0xf077,0xf060-0xf063,0xf020-0xf03f mem 0xef536000-0xef5367ff irq 19 at de vice 31.2 on pci0
ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
driver bug: Unable to set devclass (class: atkbdc devname: (unknown))
ichwd0: <Intel Lynx Point watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xcefff,0xcf000-0xcffff ,0xd0000-0xd0fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounter "TSC-low" frequency 1745956867 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, loggi ng disabled
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2 on usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
Trying to mount root from zfs:boot-pool/ROOT/default []...
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <V Series SATA SSD 120GB V4.15.0> ACS-3 ATA SATA 3.x device
ada0: Serial Number 213910663702800
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus1 target 0
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <V Series SATA SSD 120GB V4.15.0> ACS-3 ATA SATA 3.x device
ada1: Serial Number 213910663704535
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors)
ada2 at ahcich5 bus 0 scbus4 target 0 lun 0
ada2: <ST2000VN004-2E4164 SC60> ACS-2 ATA SATA 3.x device
ada2: Serial Number Z52BWQRK
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors)
ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus2 target 0
ses0: pass2,cd0 in 'Slot 02', SATA Slot: scbus3 target 0
ses0: pass3,ada2 in 'Slot 05', SATA Slot: scbus4 target 0
cd0 at ahcich2 bus 0 scbus3 target 0 lun 0
cd0: <hp DVD A DS8ACSH LHS3> Removable CD-ROM SCSI device
cd0: Serial Number 426537900560
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c losed
uhub1: 21 ports with 21 removable, self powered
Root mount waiting for: usbus0 usbus1 usbus2
uhub2: 3 ports with 3 removable, self powered
uhub0: 3 ports with 3 removable, self powered
ugen0.2: <Lite-On Technology Corp. Lenovo USB Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <Lite-On Technology Corp. Lenovo USB Keyboard, class 0/0, rev 1.10/1.13, addr 1> on usbus0
kbd2 at ukbd0
uhid0 on uhub1
uhid0: <Lite-On Technology Corp. Lenovo USB Keyboard, class 0/0, rev 1.10/1.13, addr 1> on usbus0
ugen0.3: <Logitech USB-PS/2 Optical Mouse> at usbus0
ums0 on uhub1
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/25.00, addr 2> on us bus0
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub3 on uhub2
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus 2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus 1
Root mount waiting for: usbus0 usbus1 usbus2
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.4: <Realtek USB3.0 Card Reader> at usbus0
umass0 on uhub1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:6:0: Attached to scbus6
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field i n CDB)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
da0: <Generic- USB3.0 CRW-CF/MD 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 201312261010
da0: 400.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus6 target 0 lun 1
da1: <Generic- USB3.0 CRW-SD 1.00> Removable Direct Access SPC-4 SCSI device
da1: Serial Number 201312261010
da1: 400.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus6 target 0 lun 2
da2: <Generic- USB3.0 CRW-MS 1.00> Removable Direct Access SPC-4 SCSI device
da2: Serial Number 201312261010
da2: 400.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
ichsmb0: <Intel Lynx Point SMBus controller> port 0xf000-0xf01f mem 0xef535000-0 xef5350ff irq 18 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
vmx_modinit: VMX operation disabled by BIOS
module_register_init: MOD_LOAD (vmm, 0xffffffff83604200, 0) error 6
igb0: link state changed to UP
debugnet_any_ifnet_update: Bad dn_init result from igb0 (ifp 0xfffff80005204800) , ignoring.
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: accelerated software
CPU: Intel(R) Xeon(R) CPU E3-1246 v3 @ 3.50GHz (3491.91-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SD BG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE, OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,I NVPCID,NFPUSG>
Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD >
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
igb0: link state changed to DOWN
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<IN T,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
Security policy loaded: MAC/ntpd (mac_ntpd)
igb0: link state changed to UP
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
arp: 43:05:43:05:00:00 is multicast
