BBarker
Contributor
- Joined
- Aug 7, 2015
- Messages
- 120
I am considering moving forward with some changes to my existing system. I would like to use the following motherboard/RAM with most of my existing components with some changes:
ASRock D1520D4I D-1520 Xeon
2 X Crucial CT16G4RFD4213 16GB 288-Pin DDR4 2133 for 32 gigs of ECC RAM
2 X WD WD60EFRX 6TB Red drives
MyDigitalSSD 16GB Super Boot Drive 42mm SATA III (6G) M.2 2242 NGFF SSD as the boot drive
What I would like to do is to swap the WD drives one at a time for the Seagates I am using as mirrored drives and then install the motherboard and RAM along with the boot drive to run the system. Eventually would like to use the 2 Seagate drives in another mirrored pool as additional storage and back up in this system.
Thoughts?
ASRock D1520D4I D-1520 Xeon
2 X Crucial CT16G4RFD4213 16GB 288-Pin DDR4 2133 for 32 gigs of ECC RAM
2 X WD WD60EFRX 6TB Red drives
MyDigitalSSD 16GB Super Boot Drive 42mm SATA III (6G) M.2 2242 NGFF SSD as the boot drive
What I would like to do is to swap the WD drives one at a time for the Seagates I am using as mirrored drives and then install the motherboard and RAM along with the boot drive to run the system. Eventually would like to use the 2 Seagate drives in another mirrored pool as additional storage and back up in this system.
Thoughts?