Can't replace disk because pool is unavailable, even though its imported

[paleoN]

I should have asked for:

Code:

smartctl -q noserial -a /dev/adaX

It looks like ada0 is the Seagate now. It seems fine except for when it hit 61 Celsius, outside its operating parameters. It's possible it could have caused damage.

The Western Digitals all have 199 UDMA_CRC_Error_Count. This indicates a hardware-level problem between the host controller and the controller chip on the drive. I'm guessing they are connected to the Rosewill RC-218? Then I would be looking at that more than say 3 different bad SATA cables.

ada1 has one questionable sector, 197 Current_Pending_Sector. ada2 has swapped in 1 spare sector(5), has 8 sectors pending(197) and 2 uncorrectable(198). You will want to clean them up before reusing them and keep an eye on them afterwards.

 

[cyberjock]

I should have asked for:

Code:

smartctl -q noserial -a /dev/adaX

It looks like ada0 is the Seagate now. It seems fine except for when it hit 61 Celsius, outside its operating parameters. It's possible it could have caused damage.

That's VERY hot for a hard disk. Per Google white paper on hd temps anything above 45C can result is higher failure rates for hard drives.