esamett
Patron
- Joined
- May 28, 2011
- Messages
- 345
Freenas Domain Security Run email today:
I searched the forums and saw a few postings suggesting doing smartctl long test on a certain drive. I don't see which drive I should check from the error message. GUI says both volumes and all 22 drives are on-line. Scrub was recently started. I have Smart tests scheduled per Cyberjock advice.
As background I replaced a few cables over the past few months per advice and those errors have not recurred. I also wiped a drive to remove pending sectors before that without repeat errors.
Please advise.
Thanks as always,
e
Code:
freenas.domain kernel log messages: > (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 20 20 84 74 40 9b 00 00 00 00 00 > (ada0:ahcich0:0:0:0): CAM status: ATA Status Error > (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) > (ada0:ahcich0:0:0:0): RES: 41 40 20 84 74 40 9b 00 00 00 00 > (ada0:ahcich0:0:0:0): Retrying command > (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 20 20 84 74 40 9b 00 00 00 00 00 > (ada0:ahcich0:0:0:0): CAM status: ATA Status Error > (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) > (ada0:ahcich0:0:0:0): RES: 41 40 20 84 74 40 9b 00 00 00 00 > (ada0:ahcich0:0:0:0): Retrying command > (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 20 20 84 74 40 9b 00 00 00 00 00 > (ada0:ahcich0:0:0:0): CAM status: ATA Status Error > (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) > (ada0:ahcich0:0:0:0): RES: 41 40 20 84 74 40 9b 00 00 00 00 > (ada0:ahcich0:0:0:0): Retrying command > (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 20 20 84 74 40 9b 00 00 00 00 00 > (ada0:ahcich0:0:0:0): CAM status: ATA Status Error > (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) > (ada0:ahcich0:0:0:0): RES: 41 40 20 84 74 40 9b 00 00 00 00 > (ada0:ahcich0:0:0:0): Retrying command > (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 20 20 84 74 40 9b 00 00 00 00 00 > (ada0:ahcich0:0:0:0): CAM status: ATA Status Error > (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) > (ada0:ahcich0:0:0:0): RES: 41 40 20 84 74 40 9b 00 00 00 00 > (ada0:ahcich0:0:0:0): Error 5, Retries exhaust
I searched the forums and saw a few postings suggesting doing smartctl long test on a certain drive. I don't see which drive I should check from the error message. GUI says both volumes and all 22 drives are on-line. Scrub was recently started. I have Smart tests scheduled per Cyberjock advice.
As background I replaced a few cables over the past few months per advice and those errors have not recurred. I also wiped a drive to remove pending sectors before that without repeat errors.
Please advise.
Thanks as always,
e