gareththered
Cadet
- Joined
- Sep 8, 2017
- Messages
- 2
My dmesg shows the following (extract):
However, smartctl -a /dev/ada0 shows no errors. I've ran a short and a conveyance test on the disk and no errors are shown.
This is on a Proliant Microserver Gen8 with 2 x 3TB and 2 x 1TB Western Digital disks. The error refers to one of the 3TB disks. FreeNAS is running with 12GB RAM.
Should I be worried about the messages, given that there are no SMART errors?
Code:
(ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 e0 a0 9e 50 40 5d 01 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: ATA Status Error (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) (ada0:ahcich0:0:0:0): RES: 41 40 b0 9e 50 40 5d 01 00 00 00 (ada0:ahcich0:0:0:0): Retrying command (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 e0 a0 9e 50 40 5d 01 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: ATA Status Error (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) (ada0:ahcich0:0:0:0): RES: 41 40 b0 9e 50 40 5d 01 00 00 00 (ada0:ahcich0:0:0:0): Retrying command (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 e0 a0 9e 50 40 5d 01 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: ATA Status Error (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) (ada0:ahcich0:0:0:0): RES: 41 40 b0 9e 50 40 5d 01 00 00 00 (ada0:ahcich0:0:0:0): Retrying command (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 e0 a0 9e 50 40 5d 01 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: ATA Status Error (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) (ada0:ahcich0:0:0:0): RES: 41 40 b0 9e 50 40 5d 01 00 00 00 (ada0:ahcich0:0:0:0): Retrying command (ada0:ahcich0:0:0:0): READ_FPDMA_QUEUED. ACB: 60 e0 a0 9e 50 40 5d 01 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: ATA Status Error (ada0:ahcich0:0:0:0): ATA status: 41 (DRDY ERR), error: 40 (UNC ) (ada0:ahcich0:0:0:0): RES: 41 40 b0 9e 50 40 5d 01 00 00 00 (ada0:ahcich0:0:0:0): Error 5, Retries exhausted
However, smartctl -a /dev/ada0 shows no errors. I've ran a short and a conveyance test on the disk and no errors are shown.
This is on a Proliant Microserver Gen8 with 2 x 3TB and 2 x 1TB Western Digital disks. The error refers to one of the 3TB disks. FreeNAS is running with 12GB RAM.
Should I be worried about the messages, given that there are no SMART errors?