Was unsure who to ask. Somewhat new to trunas but to start off, I am using a ASUS deluxe ii x299 motherboard and I want to use the Aquantia® AQC-111C 5G LAN connector on the board but trunas doesn't find the port. It works fine with the onboard 1gb Intel nic but I will be going to 2.5g switches on the network soon and will need the faster port. I don't know trunas very well and would like a walk through on how to set this nic up. I read some where you had to add or load the driver but am unsure how to go about doing that. For the full equipment list I am using and the setup, (yes I could buy a intel card but I am using all the PCI-E 16X slots as you will see) full build is: ASUS deluxe ii, x299 main board, Intel 10900x cpu 10 cores 20 threads 40 PCI-E lanes, 128gb 3200mhz memory (8 slots full), LSI 9207-8i SAS PCI-E card in 1st PCI-E 16X slot, 4 slot mvme card in PCI-E 16X slot 2 (will use 2 in mirror for log files X2 for two different pools), small video card in PCI-E 16X slot 3,(I might be able to move this card to a 1X Pcie slot) there are 3 mvme sockets on the board socket 1 will be a mvme 16mb Intel optaine drivefor the trunas boot drive, the 2nd socket will have a Intel 16gb optane drive for extra cache drive if needed, and the 3rd socket open at this time. Any advice or recommendations would help I have searched online and just can't seem to find the right answer for using the 5G nic. The server is up and running, I just want to be able to use the 5gb nic. currently running 3 pools one pool is 6 2tb wd red (CMR) drives zfs 1 the 2nd pool is 2 WD Red 4tb (SMR) drives zfs 1, the 3rd pool is 2 1tb SSD striped (just for fun) and the last one in 1 128gb SSD that i want to install and host my own team speak on. I have no idea how to set that up on trunas so a walkthrough on that would be great also any help on any of this would be appreciated.
Thanks in advance.
Thanks in advance.