clon¥
Cadet
- Joined
- Oct 22, 2019
- Messages
- 3
Bom dia,
Estou com alertas de erros críticos em um dos 03 HDs montados em um Servidor FreeNAS.
Está montado em sistema de RAID0 - Striping.
Qual a melhor e mais segura solução para este caso onde um dos HDs está apresentando falhas?
=========================
HD ADA1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1ER166
Serial Number: Z502SB9B
LU WWN Device Id: 5 000c50 090c7f14e
Firmware Version: CC26
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Oct 31 11:41:02 2019 BRST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 80) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 326) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 076 076 006 - 106143015
3 Spin_Up_Time PO---- 096 093 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 57
5 Reallocated_Sector_Ct PO--CK 098 098 010 - 2368
7 Seek_Error_Rate POSR-- 084 060 030 - 323216881
9 Power_On_Hours -O--CK 066 066 000 - 29790
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 52
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 22257
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 039 039 000 - 61
190 Airflow_Temperature_Cel -O---K 060 044 045 Past 40 (Min/Max 19/46 #120)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 35
193 Load_Cycle_Count -O--CK 100 100 000 - 251
194 Temperature_Celsius -O---K 040 056 000 - 40 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 035 016 000 - 10808
198 Offline_Uncorrectable ----C- 035 016 000 - 10808
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
240 Head_Flying_Hours ------ 100 253 000 - 29789h+08m+08.833s
241 Total_LBAs_Written ------ 100 253 000 - 68663041296
242 Total_LBAs_Read ------ 100 253 000 - 818014471826
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x30 SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f SL R/W 16 Host vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa8 SL VS 129 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
0xc0 SL VS 1 Device vendor specific log
0xc1 SL VS 10 Device vendor specific log
0xc3 SL VS 8 Device vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 22235 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 22235 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:56.904 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:53.287 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:49.703 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
Error 22234 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:53.287 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:49.703 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
Error 22233 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:49.703 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
ca 00 10 90 02 40 e0 00 22d+22:12:42.556 WRITE DMA
Error 22232 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
ca 00 10 90 02 40 e0 00 22d+22:12:42.556 WRITE DMA
35 00 10 ff ff ff 4f 00 22d+22:12:42.556 WRITE DMA EXT
Error 22231 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
ca 00 10 90 02 40 e0 00 22d+22:12:42.556 WRITE DMA
35 00 10 ff ff ff 4f 00 22d+22:12:42.556 WRITE DMA EXT
35 00 10 ff ff ff 4f 00 22d+22:12:42.555 WRITE DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 40 Celsius
Power Cycle Min/Max Temperature: 19/46 Celsius
Lifetime Min/Max Temperature: 14/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed
Estou com alertas de erros críticos em um dos 03 HDs montados em um Servidor FreeNAS.
Está montado em sistema de RAID0 - Striping.
Qual a melhor e mais segura solução para este caso onde um dos HDs está apresentando falhas?
=========================
- CRÍTICO: 29 de Outubro de 2019 às 13:43 - Device: /dev/ada1, 10784 Offline uncorrectable sectors
CRÍTICO: 29 de Outubro de 2019 às 13:43 - Device: /dev/ada1, 10784 Currently unreadable (pending) sectors - CRÍTICO: 29 de Outubro de 2019 às 15:13 - Device: /dev/ada1, ATA error count increased from 18199 to 18298
- OK: 29 de Outubro de 2019 às 13:43 - There is a new update available! Apply it in System -> Update tab.
CRÍTICO: 29 de Outubro de 2019 às 13:43 - The volume jobs (ZFS) state is DEGRADED: One or more devices has experienced an error resulting in data corruption. Applications may be affected.
HD ADA1
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1ER166
Serial Number: Z502SB9B
LU WWN Device Id: 5 000c50 090c7f14e
Firmware Version: CC26
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Oct 31 11:41:02 2019 BRST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 80) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 326) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 076 076 006 - 106143015
3 Spin_Up_Time PO---- 096 093 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 57
5 Reallocated_Sector_Ct PO--CK 098 098 010 - 2368
7 Seek_Error_Rate POSR-- 084 060 030 - 323216881
9 Power_On_Hours -O--CK 066 066 000 - 29790
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 52
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 22257
188 Command_Timeout -O--CK 100 100 000 - 0 0 0
189 High_Fly_Writes -O-RCK 039 039 000 - 61
190 Airflow_Temperature_Cel -O---K 060 044 045 Past 40 (Min/Max 19/46 #120)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 35
193 Load_Cycle_Count -O--CK 100 100 000 - 251
194 Temperature_Celsius -O---K 040 056 000 - 40 (0 14 0 0 0)
197 Current_Pending_Sector -O--C- 035 016 000 - 10808
198 Offline_Uncorrectable ----C- 035 016 000 - 10808
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 1
240 Head_Flying_Hours ------ 100 253 000 - 29789h+08m+08.833s
241 Total_LBAs_Written ------ 100 253 000 - 68663041296
242 Total_LBAs_Read ------ 100 253 000 - 818014471826
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x09 SL R/W 1 Selective self-test log
0x30 SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f SL R/W 16 Host vendor specific log
0xa1 SL VS 20 Device vendor specific log
0xa8 SL VS 129 Device vendor specific log
0xa9 SL VS 1 Device vendor specific log
0xc0 SL VS 1 Device vendor specific log
0xc1 SL VS 10 Device vendor specific log
0xc3 SL VS 8 Device vendor specific log
0xe0 SL R/W 1 SCT Command/Status
0xe1 SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 22235 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 22235 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:56.904 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:53.287 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:49.703 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
Error 22234 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:53.287 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:49.703 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
Error 22233 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:49.703 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
ca 00 10 90 02 40 e0 00 22d+22:12:42.556 WRITE DMA
Error 22232 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:46.152 READ DMA EXT
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
ca 00 10 90 02 40 e0 00 22d+22:12:42.556 WRITE DMA
35 00 10 ff ff ff 4f 00 22d+22:12:42.556 WRITE DMA EXT
Error 22231 occurred at disk power-on lifetime: 29767 hours (1240 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 ff ff ff 4f 00 22d+22:12:42.558 READ DMA EXT
35 00 38 ff ff ff 4f 00 22d+22:12:42.557 WRITE DMA EXT
ca 00 10 90 02 40 e0 00 22d+22:12:42.556 WRITE DMA
35 00 10 ff ff ff 4f 00 22d+22:12:42.556 WRITE DMA EXT
35 00 10 ff ff ff 4f 00 22d+22:12:42.555 WRITE DMA EXT
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 40 Celsius
Power Cycle Min/Max Temperature: 19/46 Celsius
Lifetime Min/Max Temperature: 14/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed