Allen Pedrolie
Cadet
- Joined
- Oct 3, 2014
- Messages
- 3
I know that redundancy is the best plan for everything. When I built this file server it was just a storage medium for junk downloads and whatnot. FreeNAS 8.0.4 , The box had 3 drives total 1 x 1tb, 1 x2tb, and 1x 3tb. Here is where I fall on the sword... each drive was its own zpool, at least I think they were. It would seem that the 1tb drive is not operating normally. I cant seem to get any data from the 1tb when i run zpool status. the 2 and 3 tb ones are fine and work normally. I know this is a long shot but might there be a way to just pull the data off of the 1tb if the drive still spins?
dmesg code bleow:
I know that it is alot to ask and I am not the most talented linux user, but I would like to try to recover my data if possible...
Thanks for any help you all can provide.
dmesg code bleow:
Code:
Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-RELEASE-p9 #0: Tue Jun 12 08:57:14 PDT 2012 jpaetzel@commander.ixsystems.com:/home/jpaetzel/8.0.4/obj.amd64/usr/home/jpaetzel/8.0.4/FreeBSD/src/sys/FREENAS.amd64 amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf43 Family = f Model = 4 Stepping = 3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR> AMD Features=0x20100800<SYSCALL,NX,LM> TSC: P-state invariant real memory = 1073741824 (1024 MB) avail memory = 1016074240 (969 MB) ACPI APIC Table: <DELL DM051 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 ioapic0: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard lapic0: Forcing LINT1 to edge trigger kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <DELL DM051 > on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, f00000 (3) failed acpi0: reservation of 1000000, 3ee88c00 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem 0xec000000-0xedffffff,0xefde0000-0xefdeffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> mem 0xefdf0000-0xefdfffff at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xff80-0xff9f irq 21 at device 29.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xff60-0xff7f irq 22 at device 29.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xff20-0xff3f irq 23 at device 29.3 on pci0 uhci3: [ITHREAD] usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80800-0xffa80bff irq 21 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xcc00-0xccff mem 0xefafed00-0xefafedff irq 18 at device 2.0 on pci3 re0: Chip rev. 0x04000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 00:26:f2:ac:cb:33 re0: [FILTER] atapci0: <SiI 3512 SATA150 controller> port 0xc8a0-0xc8a7,0xc898-0xc89b,0xc8a8-0xc8af,0xc89c-0xc89f,0xc8b0-0xc8bf mem 0xefafee00-0xefafefff irq 19 at device 3.0 on pci3 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 16 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] atapci2: <Intel ICH7 SATA300 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 20 at device 31.2 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xd17ff,0xd1800-0xd37ff,0xd3800-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range acpi_perf0: <ACPI CPU Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr f2d00000f2d device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered (noperiph:ata3:0:-1:-1): rescan already queued uhub4: 8 ports with 8 removable, self powered ugen4.2: <USB 2.0> at usbus4 umass0: <USB 2.0 USB Flash Drive, class 0/0, rev 2.00/1.00, addr 2> on usbus4 ada0 at ata3 bus 0 scbus1 target 0 lun 0 ada0: <WDC WD30EZRX-00MMMB0 80.00A80> ATA-8 SATA 3.x device ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C) ada1 at ata4 bus 0 scbus3 target 0 lun 0 ada1: <ST32000542AS CC34> ATA-8 SATA 2.x deviceda0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: <USB 2.0 USB Flash Drive 0.00> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1927MB (3947079 512 byte sectors: 255H 63S/T 245C) ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2 at ata4 bus 0 scbus3 target 1 lun 0 ada2: <ST31000340AS SD15> ATA-8 SATA 2.x device ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) lapic1: Forcing LINT1 to edge trigger SMP: AP CPU #1 Launched! ugen3.2: <Lite-On Technology Corp.> at usbus3 ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.18, addr 2> on usbus3 kbd2 at ukbd0 uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev 1.10/1.18, addr 2> on usbus3 GEOM: da0s1: geometry does not match label (16h,63s != 255h,63s). Trying to mount root from ufs:/dev/ufs/FreeNASs1a ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. ZFS filesystem version 4 ZFS storage pool version 15 re0: link state changed to UP
I know that it is alot to ask and I am not the most talented linux user, but I would like to try to recover my data if possible...
Thanks for any help you all can provide.
Last edited: