Ismael Duarte
Contributor
- Joined
- Jun 13, 2011
- Messages
- 154
Hi All,
I'm still trying to recover some data from an old pool and already have another problem.
I bought a new HDD and more ram to my FreeNas, but, for no apparente reason I've a FATAL TRAP 12, even with no trafic on FreeNas.
Here some screens of the error
and some info about my system at this moment
Already done:
- Changed SATA cables
- Tested RAM for a few hours (100%)
- HDD is new
Any clue?
I'm still trying to recover some data from an old pool and already have another problem.
I bought a new HDD and more ram to my FreeNas, but, for no apparente reason I've a FATAL TRAP 12, even with no trafic on FreeNas.
Here some screens of the error
and some info about my system at this moment
Code:
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE-p6 #0 r248141M: Sun Mar 10 23:42:41 PDT 2013
root@build.ixsystems.com:/home/jpaetzel/8.3.1-RELEASE/os-base/i386/i386/tank/home/jpaetzel/8.3.1-RELEASE/FreeBSD/src/sys/FREENAS.i386 i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3198.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf34 Family = f Model = 3 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
TSC: P-state invariant
real memory = 3221225472 (3072 MB)
avail memory = 3139133440 (2993 MB)
ACPI APIC Table: <A M I OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
hpt27xx: RocketRAID 27xx controller driver v1.0 (Mar 10 2013 23:42:32)
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bfef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xeec0-0xeedf irq 16 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef00-0xef1f irq 19 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef20-0xef3f irq 18 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef40-0xef5f irq 16 at device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebff800-0xfebffbff irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
atapci0: <Promise PDC20378 SATA150 controller> port 0xdf00-0xdf3f,0xdfa0-0xdfaf,0xdc00-0xdc7f mem 0xfeafe000-0xfeafefff,0xfeac0000-0xfeadffff irq 23 at device 4.0 on pci2
atapci0: [ITHREAD]
atapci0: [ITHREAD]
ata2: <ATA channel> at channel 0 on atapci0
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci0
ata3: [ITHREAD]
ata4: <ATA channel> at channel 2 on atapci0
ata4: [ITHREAD]
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaf8000-0xfeafbfff irq 22 at device 5.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:13:d4:19:0f:38
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
skc0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0xefe0-0xefe7,0xefac-0xefaf,0xefa0-0xefa7,0xefa8-0xefab,0xef90-0xef9f irq 18 at device 31.1 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel> at channel 0 on atapci1
ata5: [ITHREAD]
ata6: <ATA channel> at channel 1 on atapci1
ata6: [ITHREAD]
atapci2: <Intel ICH5 SATA150 controller> port 0xef88-0xef8f,0xef84-0xef87,0xef68-0xef6f,0xef80-0xef83,0xeeb0-0xeebf irq 18 at device 31.2 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel> at channel 0 on atapci2
ata7: [ITHREAD]
ata8: <ATA channel> at channel 1 on atapci2
ata8: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hpt27xx: no controller detected.
GEOM_RAID5: Module loaded, version 1.1.20110927.40 (rev 00ce00e5abb4)usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <JetFlash> at usbus4
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus4
ada0 at ata7 bus 0 scbus5 target 0 lun 0
ada0: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
da0: <JetFlash Transcend 2GB 1100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 1920MB (3932160 512 byte sectors: 255H 63S/T 244C)
SMP: AP CPU #1 Launched!
GEOM: da0s1: geometry does not match label (16h,63s != 255h,63s).
Trying to mount root from ufs:/dev/ufs/FreeNASs1a
ZFS filesystem version 5
ZFS storage pool version 28
GEOM_ELI: Device ada0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: softwareCode:
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT DISCO 1.82T 441G 1.39T 23% 1.00x ONLINE /mnt
Code:
pool: DISCO state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM DISCO ONLINE 0 0 0 gptid/476b0f87-9bbc-11e2-903a-0013d4190f38 ONLINE 0 0 0 errors: No known data errors
Code:
Name Status Components
gptid/476b0f87-9bbc-11e2-903a-0013d4190f38 N/A ada0p2
ufs/FreeNASs3 N/A da0s3
ufs/FreeNASs4 N/A da0s4
ufs/FreeNASs1a N/A da0s1a
[[1mroot@duarte[m] [1m~[m# camcontrol devlist -v
scbus0 on ata2 bus 0:
<> at scbus0 target -1 lun -1 ()
scbus1 on ata3 bus 0:
<> at scbus1 target -1 lun -1 ()
scbus2 on ata4 bus 0:
<> at scbus2 target -1 lun -1 ()
scbus3 on ata5 bus 0:
<> at scbus3 target -1 lun -1 ()
scbus4 on ata6 bus 0:
<> at scbus4 target -1 lun -1 ()
scbus5 on ata7 bus 0:
<WDC WD20EARX-00PASB0 51.0AB51> at scbus5 target 0 lun 0 (pass0,ada0)
<> at scbus5 target -1 lun -1 ()
scbus6 on ata8 bus 0:
<> at scbus6 target -1 lun -1 ()
scbus7 on ata0 bus 0:
<> at scbus7 target -1 lun -1 ()
scbus8 on ata1 bus 0:
<> at scbus8 target -1 lun -1 ()
scbus9 on umass-sim0 bus 0:
<JetFlash Transcend 2GB 1100> at scbus9 target 0 lun 0 (pass1,da0)
scbus-1 on xpt0 bus 0:
<> at scbus-1 target -1 lun -1 (xpt0)Already done:
- Changed SATA cables
- Tested RAM for a few hours (100%)
- HDD is new
Any clue?
