Benceking24
Cadet
- Joined
- Feb 19, 2019
- Messages
- 3
I tried to install a fresh clean version of the official 11.2-RLEASE-U1 but ended up reinstalling 4 times and still can't install it properly without errors under a decent time. I made an USB image with Rufus to a USB 2.0 16gb drive and then booted it. I started the install with the USB 3.0 drive selected as destination for system storage and boot with BIOS after that (i tried the UEFI option didn't helped). Finally last time i was able to log in on the website and turn on SSH and copy all the log files but it was really really slow. (it was a minute to get the prompt after entering the password via ssh). Also did reset all the bios settings and tried to turn off CPU C-state and Intel speedstep. Bios version is the latest.
The install process took 55 minutes. The first boot after that took half an hour and i got a lot of error in connection with middlewared.
(messages, debug.log and middlewared.log attached)
My setup:
Motherboard: Asus prime b250m-k
CPU: Intel i3-7100
Memory: HyperX 8GB Fury DDR4 2400MHz CL15
Main storage: 2x WD Red 4TB 3.5" 5400rpm 64MB
Boot storage: Kingston DataTraveler SE9 G2 3.0 16GB
PSU: Coolermaster MasterWatt Lite 400W
UPS: Eaton 5E650iUSBDIN 650VA
The install process took 55 minutes. The first boot after that took half an hour and i got a lot of error in connection with middlewared.
(messages, debug.log and middlewared.log attached)
My setup:
Motherboard: Asus prime b250m-k
CPU: Intel i3-7100
Memory: HyperX 8GB Fury DDR4 2400MHz CL15
Main storage: 2x WD Red 4TB 3.5" 5400rpm 64MB
Boot storage: Kingston DataTraveler SE9 G2 3.0 16GB
PSU: Coolermaster MasterWatt Lite 400W
UPS: Eaton 5E650iUSBDIN 650VA
Attachments
Last edited: