sporkfilms
Cadet
- Joined
- Jan 12, 2018
- Messages
- 4
Hello All,
Please forgive my noob post and thanks in advance for your help.
I'm having an issue trying to add an Intel X550-T2 NIC to my existing Freenas machine (11.1-U5). After installing the Intel X550-T2 NIC, I am unable to access the Web UI and only have command line control through IPMI. I do see the X550-T2 card list in BIOS and I have the option to configure in new NIC ports through the Freenas command line prompt.
I have a server with the following hardware specs:
MB: SuperMicro A2SDi-H-TP4F
RAM: 128GB Hynix DDR4-2400 ECC REG DIMM
NIC (4x10G) Integrated Intel C3000 Soc (2x) RJ45 10GBase-T ports (2x) SFP+ ports
HDD Pool: 10X WD Red Pro 6TB NAS Hard Disk Drive - 7200 RPM Class SATA 6Gb/s 128MB Cache
Any insight you can provide is much appreciated.
Thanks.
Please forgive my noob post and thanks in advance for your help.
I'm having an issue trying to add an Intel X550-T2 NIC to my existing Freenas machine (11.1-U5). After installing the Intel X550-T2 NIC, I am unable to access the Web UI and only have command line control through IPMI. I do see the X550-T2 card list in BIOS and I have the option to configure in new NIC ports through the Freenas command line prompt.
I have a server with the following hardware specs:
MB: SuperMicro A2SDi-H-TP4F
RAM: 128GB Hynix DDR4-2400 ECC REG DIMM
NIC (4x10G) Integrated Intel C3000 Soc (2x) RJ45 10GBase-T ports (2x) SFP+ ports
HDD Pool: 10X WD Red Pro 6TB NAS Hard Disk Drive - 7200 RPM Class SATA 6Gb/s 128MB Cache
Any insight you can provide is much appreciated.
Thanks.