Louis_Cyphre
Cadet
- Joined
- Aug 28, 2020
- Messages
- 6
So, i only have 8TB WD RED drives in my raid, with the exception of one 8TB Ironwolf disk. Two of the WD drives are 2 year old and all the others, including the Seagate are 1 year old. A couple of days ago i got this error "Critical error - ata2 error count increased from 0 to 1".
Here is the question, is my drive failing? Only found some old thread on this and a thread where someone had this error on all of his drives.
I have heard that the Ironwolf is not as reliable as the WD's, but after one year? My drives are running at temperatures just around 37-41°
Intel i5-9600K
Asus Prime B365M -A
16GB DDR4-2666
4x WD 8TB RED
1x Seagate 8TB Ironwolf
Intel Gigabit PCI-E EXPI9301CTBLK
Here is the question, is my drive failing? Only found some old thread on this and a thread where someone had this error on all of his drives.
I have heard that the Ironwolf is not as reliable as the WD's, but after one year? My drives are running at temperatures just around 37-41°
Intel i5-9600K
Asus Prime B365M -A
16GB DDR4-2666
4x WD 8TB RED
1x Seagate 8TB Ironwolf
Intel Gigabit PCI-E EXPI9301CTBLK
Code:
root@freenas[~]# smartctl -a /dev/ada2 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Device Model: ST8000VN004-2M2101 Serial Number: WSD5NE4V LU WWN Device Id: 5 000c50 0e3701740 Firmware Version: SC60 User Capacity: 8,001,563,222,016 bytes [8.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 6 00:39:22 2022 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 559) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 698) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 084 064 044 Pre-fail Always - 226168952 3 Spin_Up_Time 0x0003 084 084 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 9 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 64 7 Seek_Error_Rate 0x000f 082 060 045 Pre-fail Always - 158797125 9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6784 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 9 18 Head_Health 0x000b 100 100 050 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 060 055 040 Old_age Always - 40 (Min/Max 29/45) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 291 194 Temperature_Celsius 0x0022 040 045 000 Old_age Always - 40 (0 26 0 0 0) 195 Hardware_ECC_Recovered 0x001a 084 064 000 Old_age Always - 226168952 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 6772 (146 91 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 13728089576 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 36338870808 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 6615 hours (275 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 58 ff ff ff 4f 00 28d+04:44:09.104 READ FPDMA QUEUED 60 00 58 ff ff ff 4f 00 28d+04:44:09.104 READ FPDMA QUEUED 61 00 08 ff ff ff 4f 00 28d+04:44:03.427 WRITE FPDMA QUEUED 60 00 50 ff ff ff 4f 00 28d+04:44:02.288 READ FPDMA QUEUED 60 00 58 ff ff ff 4f 00 28d+04:44:01.780 READ FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 6364 hours (265 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 58 ff ff ff 4f 00 17d+18:03:46.415 READ FPDMA QUEUED 61 00 08 ff ff ff 4f 00 17d+18:03:46.415 WRITE FPDMA QUEUED 60 00 50 ff ff ff 4f 00 17d+18:03:46.414 READ FPDMA QUEUED 60 00 b0 ff ff ff 4f 00 17d+18:03:35.781 READ FPDMA QUEUED 60 00 50 ff ff ff 4f 00 17d+18:03:34.017 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 6770 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing