Last night I got an email saying my boot drive was online, but experienced an unrecoverable error.
This morning I ran a ‘zpool status -v’ and got this:
From what I can tell my boot drive is the issue because of the checksum value. Is that correct?
I currently have a single 16GB flash drive as my boot drive. If the boot drive is actually the issue here I’d like to replace it and then add a second to mirror them. Is there any kind of guide on how to add a second boot drive into a already running/configured system? What about replacing the boot drive?
I want to check with those who know more than myself before I jump in with both feet and maybe screw something up.
Thanks for the assistance!
This morning I ran a ‘zpool status -v’ and got this:
Code:
[user@freenas] ~# zpool status -v pool: freenas-boot state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 0 in 0h3m with 0 errors on Tue Oct 11 03:48:26 2016 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 gptid/1b3ddb72-e64e-11e5-bbdb-00259064a020 ONLINE 0 0 2 errors: No known data errors pool: noname state: ONLINE scan: scrub repaired 0 in 7h24m with 0 errors on Sun Oct 2 07:24:24 2016 config: NAME STATE READ WRITE CKSUM noname ONLINE 0 0 0 raidz2-0 ONLINE 0 0 0 gptid/8427db69-e65c-11e5-9866-00259064a020 ONLINE 0 0 0 gptid/853b6cbb-e65c-11e5-9866-00259064a020 ONLINE 0 0 0 gptid/864af191-e65c-11e5-9866-00259064a020 ONLINE 0 0 0 gptid/8760f0cb-e65c-11e5-9866-00259064a020 ONLINE 0 0 0 errors: No known data errors [user@freenas] ~#
From what I can tell my boot drive is the issue because of the checksum value. Is that correct?
I currently have a single 16GB flash drive as my boot drive. If the boot drive is actually the issue here I’d like to replace it and then add a second to mirror them. Is there any kind of guide on how to add a second boot drive into a already running/configured system? What about replacing the boot drive?
I want to check with those who know more than myself before I jump in with both feet and maybe screw something up.
Thanks for the assistance!