After installing FreeNAS to a USB stick, the system starts up initialises services, does a bunch of 'stuff' (to much stuff on the screen moving too quickly for me to see), and then after about 5 minutes of doing whatever it is doing - it reboots.
I have tried using 4 different USB sticks (both for the ISO image, and as the target for the installation).
I have tried installing both the 9.3 Stable and 9.3.1 nightly builds, but I get the same result on both. Note that attempting to install the same iso in VMWare, worked without a problem.
Hardware
Motherboard = Supermicro X8DTI-F (inc IPMI and 2x GBe - flashed to latest bios)
CPU = 2x Intel Xeon CPU E5520 @ 2.27Ghz (Quad core Hyperthreaded - 2.53ghz Turbo)
Memory = 48GB (12x 4GB sticks of ECC DDR3-1066 Kingston KVR1066D3D4)
RAID card = 3ware 9650SE-8LPML
Drives: 6x WD3000HLFS (300GB) WD VelociRaptor 10k
Additional Network: 2x Intel Pro/1000 MT Dual Port NICs
I have tried removing the additional network cards and the 3ware card, but it had no effect.
The attached file is the last thing I see on the screen before the reboot.
I have tried using 4 different USB sticks (both for the ISO image, and as the target for the installation).
I have tried installing both the 9.3 Stable and 9.3.1 nightly builds, but I get the same result on both. Note that attempting to install the same iso in VMWare, worked without a problem.
Hardware
Motherboard = Supermicro X8DTI-F (inc IPMI and 2x GBe - flashed to latest bios)
CPU = 2x Intel Xeon CPU E5520 @ 2.27Ghz (Quad core Hyperthreaded - 2.53ghz Turbo)
Memory = 48GB (12x 4GB sticks of ECC DDR3-1066 Kingston KVR1066D3D4)
RAID card = 3ware 9650SE-8LPML
Drives: 6x WD3000HLFS (300GB) WD VelociRaptor 10k
Additional Network: 2x Intel Pro/1000 MT Dual Port NICs
I have tried removing the additional network cards and the 3ware card, but it had no effect.
The attached file is the last thing I see on the screen before the reboot.