Hello,
I recently built a freeNAS machine following (almost to the T) the recipe provided by Brian Moses @ http://blog.brianmoses.net/2015/01/diy-nas-2015-edition.html (I used 6 x 3 TB drives, otherwise identical setup and gear).
This build uses the ASRock c2550d4i motherboard, and I have the system connected (via ethernet) to a Netgear WGR614v7 router, which is connected to a Scientific Atlanta cable internet modem (ISP: Cox).
No matter what I seem to do (e.g., taking a variety of advice by combing this forum), I am unable to connect to the freeNAS machine in my home network. I continually get the "No configured interfaces were found" message, and when I try to manually configure and the OS subsequently spits out a URL, the URL does not work, and my router still does not show that anything is attached @ the URL provided. I've entered "shell" and typed "ifconfig", and attached the output.
I hate to bother folks on here with a potentially mundane issue, but after spending so much time on this with no solution, I'm concerned that continuing to meddle unguided may lead to new issues. Also, since I bought all the hardware a little over a week ago, the clock is ticking, so to speak, on being able to return faulty hardware (should that be an issue).
Any advice would be greatly appreciated, and I'm happy to provide and additional output from the machine, so long as you tell me how to get it :) (I'm new to freeNAS, in case you couldn't tell).
Thanks,
Mike
I recently built a freeNAS machine following (almost to the T) the recipe provided by Brian Moses @ http://blog.brianmoses.net/2015/01/diy-nas-2015-edition.html (I used 6 x 3 TB drives, otherwise identical setup and gear).
This build uses the ASRock c2550d4i motherboard, and I have the system connected (via ethernet) to a Netgear WGR614v7 router, which is connected to a Scientific Atlanta cable internet modem (ISP: Cox).
No matter what I seem to do (e.g., taking a variety of advice by combing this forum), I am unable to connect to the freeNAS machine in my home network. I continually get the "No configured interfaces were found" message, and when I try to manually configure and the OS subsequently spits out a URL, the URL does not work, and my router still does not show that anything is attached @ the URL provided. I've entered "shell" and typed "ifconfig", and attached the output.
I hate to bother folks on here with a potentially mundane issue, but after spending so much time on this with no solution, I'm concerned that continuing to meddle unguided may lead to new issues. Also, since I bought all the hardware a little over a week ago, the clock is ticking, so to speak, on being able to return faulty hardware (should that be an issue).
Any advice would be greatly appreciated, and I'm happy to provide and additional output from the machine, so long as you tell me how to get it :) (I'm new to freeNAS, in case you couldn't tell).
Thanks,
Mike