So originally I had 3 disks in a stripe, ada0, 1, and 2. ada0 was giving me fits, and it was the same type and age drive as one I had fail in the past, so I hit replace in the gui, and replaced it with ada4. The problem is, when I have done this in the past, it would remove the old drive from the stripe, but this time it did not. Once the replacement was finished, it left both ada4 and ada0 in a mirror (it appears) inside of the stripe. I shut the pc down, and physically removed ada0, so the array is operating in degraded mode, but all the files are there, and I can access everything.
Is it possible to get it back to normal operating modes from here?
Code:
NAME STATE READ WRITE CKS
UM
Storage DEGRADED 0 0
0
replacing-0 DEGRADED 0 0
0
8476132071472504239 UNAVAIL 0 0
0 was /dev/gptid/6d3fa90d-1b23-11e2-b307-00241d29191e
gptid/9254b0ca-2141-11e2-b3d2-00241d29191e ONLINE 0 0
0
gptid/71b35dc9-1b23-11e2-b307-00241d29191e ONLINE 0 0
0
gptid/59fa73fd-1bb5-11e2-a43a-00241d29191e ONLINE 0 0 Is it possible to get it back to normal operating modes from here?
