ehowton
Cadet
- Joined
- Jul 1, 2021
- Messages
- 5
Howdy! I’m running FreeNAS-11.3-U5 on a R730 with 7xSAS drives in a single vdev across a hardware RAID5 volume. As such, many of the zpool commands do not return detailed information, and individual disk options are unavailable. The server reports a disk error on one of the hard drives, but there is no functionality in FreeNAS to offline it of course. The hardware subsystem supports hot-swappable auto-reconfiguration, but I am unsure what replacing the disk will do to the zPool. Worst case scenario I can restore from backup but I was curious as to what to expect if anyone in the community knows. Thanks!
Required Specs:
Dell PowerEdge R730 Gen13
32-thread Xeon E5-2640v3 @ 2.60GHz
16GB PC4-2400T ECC
7x10k 146GB SAS (Internal USB boot)
PERC H730P RAID controller
(Intel?) 10GB quad-port HBA
Required Specs:
Dell PowerEdge R730 Gen13
32-thread Xeon E5-2640v3 @ 2.60GHz
16GB PC4-2400T ECC
7x10k 146GB SAS (Internal USB boot)
PERC H730P RAID controller
(Intel?) 10GB quad-port HBA