aufalien
Patron
- Joined
- Jul 25, 2013
- Messages
- 374
Hi,
Odd thing with the GUI, when I go to extend my volume as I've been doing, I can see the remaining 16 disks under Available disks (already have added 20 previously) but cannot get the display portion allowing me to choose them (pic attached).
I've 36 disks amongst 3 JBODs, hardware is as follows;
Server is Intel R2312SC2SHGR;
http://ark.intel.com/products/65399/Intel-Server-System-R2312SC2SHGR
JBOD are Intel JBOD2312S2SP:
http://www.intel.com/content/www/us/en/server-systems/storage-system-jbod.html
HBAs are LSI SAS2308;
http://www.intel.com/content/www/us/en/servers/raid/raid-controller-rs25gb008.html
SATA drives are Seagate 3TB Constellation ES.2;
http://www.seagate.com/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-capacity-3-5-hdd/
Odd thing with the GUI, when I go to extend my volume as I've been doing, I can see the remaining 16 disks under Available disks (already have added 20 previously) but cannot get the display portion allowing me to choose them (pic attached).
I've 36 disks amongst 3 JBODs, hardware is as follows;
Server is Intel R2312SC2SHGR;
http://ark.intel.com/products/65399/Intel-Server-System-R2312SC2SHGR
JBOD are Intel JBOD2312S2SP:
http://www.intel.com/content/www/us/en/server-systems/storage-system-jbod.html
HBAs are LSI SAS2308;
http://www.intel.com/content/www/us/en/servers/raid/raid-controller-rs25gb008.html
SATA drives are Seagate 3TB Constellation ES.2;
http://www.seagate.com/internal-hard-drives/enterprise-hard-drives/hdd/enterprise-capacity-3-5-hdd/
