XL710-QDA2 : Intel Driver

[Michael Plourde]

Hello,
I'm trying to configure XL710-QDA2 card to work in 2x1x40 mode.
I have try to upgrade NVM and tools from the intel download center, but it said that the driver need to be updated:
ixl0: <Intel(R) Ethernet Controller XL710 for 40GbE QSFP+ - 2.3.0-k> mem 0xdd000000-0xdd7fffff,0xdd818000-0xdd81ffff irq 17 at device 0.0 on pci2
ixl0: fw 8.13.63341 api 1.12 nvm 8.15 etid 80009621 oem 1.267.0
ixl0: The driver for the device detected a newer version of the NVM image than expected.
ixl0: Please install the most recent version of the network driver.

As I cannot build in FreeNAS or TrueNAS, I just want to know if there is any update of this driver that is available or when will it be.
Actually, the tools is not working properly, as I can onlyset those mode:
~/IntelXL710/tools/FreeBSDx64]# ./epct64e -get -nic=1
Intel(R) Ethernet Port Configuration Tool
EPCT version: v1.35.57.01
Copyright(C) 2020 Intel Corporation.

Available Port Options:
======================================
Active Port
Option Option (Gbps)
======== =============================
4x10
X 2x2x10A
2x2x10B

Warning: Any changes to the port option configuration will require a reboot before the device will function correctly.

All actions succeeded.


I have no option to configure each module from this NIC in to 1x40Gbps (2x1x40).

Any help will be welcome,
Regards,
Michael