I just started building my first NAS from secondhand, and new, hardware of ebay, however starting it up for the first time, I don’t get a post, only 5 short beep. I can’t find anything in the manual for 5 beeps, only 5 short and 1 long beep for bad memory and I have tried replacing the memory with some old working memory I had on hand from an old pc.
As this did not help, I turn to google, and funded that 5 beep on the super micro x10 series is for no video signal, and that the X9 series is not supporting the g2020 without a bios update, and that for updating I needed an older CPU.
I hope some of you guys might be able to help me out.
Hardware:
X9SCL motherboard
Intel G2020 CPU
Samsung ecc ram 1333 MHz, don’t know the exact model number.
Some old 450w psu
As this did not help, I turn to google, and funded that 5 beep on the super micro x10 series is for no video signal, and that the X9 series is not supporting the g2020 without a bios update, and that for updating I needed an older CPU.
I hope some of you guys might be able to help me out.
Hardware:
X9SCL motherboard
Intel G2020 CPU
Samsung ecc ram 1333 MHz, don’t know the exact model number.
Some old 450w psu