When I am using moving data from one SMB share \\freenas.local\Backups to \\freenas.local\Veeam Backups (those are on different Arrays on the same box), Through my 10Gbit NIC on my desktop (X520-DA1), my Desktop loses connection to the freenas server's SMB shares, and FreeFileSync throws an error stating the "Specified network name is no longer available" When I attempt to browse to the SMB share when it stops transfering it is indeed not accessible however all other traffic is flowing from my desktop and the server is still replying to ICMP traffic.
I can access it from my second system without a problem when I get that error, in fact I can keep on transferring all the data without problems (second system is limited to 1Gbit).
If instead of directly from freenas share to freenas share, I copy the files to my desktop first then over to freenas it is not a problem.
Sadly my secondary system with the other 10Gbit NIC is offline so I cannot test with that (hardware failure). I was wondering if anybody had experienced this or has some suggestions, or where I should start troubleshooting.
FreeNAS hardware:
SuperMicro X9DRD-iF
2x Intel 2640v2
128GB (8x16GB) ECC Samsung M393B2G70DB0-CMA
Mellanox ConnectX-2 EN using a 2m Meraki DAC to a US-16-XG (9k MTU)
8x3TB WD Red RAID 10
4x8TB WD Red RAID 10
2x LSI-9207-8i
HX1000 PSU
Norco RPC-3216
FreeNAS 11 U3
Desktop (not sure if it is really relevant)
4770k Stock Clocks
32GB RAM
Various SSD's
Intel X520-DA1 (9k MTU) using a Intel Compatible SFP+ transceiver from FiberStore to 3m OM4 to Ubiquiti Compatible SFP+ transceiver (also FiberStore) in the US-16-XG
Windows 7 SP1
I can access it from my second system without a problem when I get that error, in fact I can keep on transferring all the data without problems (second system is limited to 1Gbit).
If instead of directly from freenas share to freenas share, I copy the files to my desktop first then over to freenas it is not a problem.
Sadly my secondary system with the other 10Gbit NIC is offline so I cannot test with that (hardware failure). I was wondering if anybody had experienced this or has some suggestions, or where I should start troubleshooting.
FreeNAS hardware:
SuperMicro X9DRD-iF
2x Intel 2640v2
128GB (8x16GB) ECC Samsung M393B2G70DB0-CMA
Mellanox ConnectX-2 EN using a 2m Meraki DAC to a US-16-XG (9k MTU)
8x3TB WD Red RAID 10
4x8TB WD Red RAID 10
2x LSI-9207-8i
HX1000 PSU
Norco RPC-3216
FreeNAS 11 U3
Desktop (not sure if it is really relevant)
4770k Stock Clocks
32GB RAM
Various SSD's
Intel X520-DA1 (9k MTU) using a Intel Compatible SFP+ transceiver from FiberStore to 3m OM4 to Ubiquiti Compatible SFP+ transceiver (also FiberStore) in the US-16-XG
Windows 7 SP1
Last edited: