Hello,
I have just setup a FreeNAS 11.2-BETA3. My configuration is as below:
Motherboard: AsRock H310M-ITX/ac (ASRH310M-ITXAC)
CPU: Intel Pentium Gold G5400 Desktop Processor 2 Core 3.7GHz LGA1151 300 Series 54W/58W BX80684G5400
RAM: 2 x Kinston HyperX Fury 8GB DDR4 2666Mhz (HX426C16FB2/8)
CASE: SilverStone Technology Premium Mini-ITX / DTX Small Form Factor NAS Computer Case, Black (DS380B)
PSU: Silverstone ST450W 80+ Bronze (could not find exact part link. Here is closest one I could locate)
POOL DISCS: 4 x WD Red 1TB NAS Hard Drive - 5400 RPM Class, SATA 6 Gb/s, 64 MB Cache, 3.5" - WD10EFRX
BOOT DISC: 8GB No-Name USB Flash drive
Pool is set as RaidZ2. No jails, no VMs. Simple windows file sharing. I have no problems so far and system is up and running.
I am well aware that motherboard and RAM is not suggested. SuperMicro motherboards are not available here in Turkey, and ordering them on Amazon or any other shop will at least double cost on them due to local customs. I had to take that path for starters. I did more than a week time test on RAMs and CPU and HDD burning. I will be backing up my data on a remote media.
One other thing I also would like to backup is my configuration file. However, I could not find where that configuration file is. There are a lot of threads mentioning that people backup it nightly for easier and faster restore from a failed USB for example. My read on documentation does not indicate any location or method to save that file.
My questions are:
1- Where is "configuration file" on my system?
2- How can I backup that file?
Thanks & regards,
Ertan
I have just setup a FreeNAS 11.2-BETA3. My configuration is as below:
Motherboard: AsRock H310M-ITX/ac (ASRH310M-ITXAC)
CPU: Intel Pentium Gold G5400 Desktop Processor 2 Core 3.7GHz LGA1151 300 Series 54W/58W BX80684G5400
RAM: 2 x Kinston HyperX Fury 8GB DDR4 2666Mhz (HX426C16FB2/8)
CASE: SilverStone Technology Premium Mini-ITX / DTX Small Form Factor NAS Computer Case, Black (DS380B)
PSU: Silverstone ST450W 80+ Bronze (could not find exact part link. Here is closest one I could locate)
POOL DISCS: 4 x WD Red 1TB NAS Hard Drive - 5400 RPM Class, SATA 6 Gb/s, 64 MB Cache, 3.5" - WD10EFRX
BOOT DISC: 8GB No-Name USB Flash drive
Pool is set as RaidZ2. No jails, no VMs. Simple windows file sharing. I have no problems so far and system is up and running.
I am well aware that motherboard and RAM is not suggested. SuperMicro motherboards are not available here in Turkey, and ordering them on Amazon or any other shop will at least double cost on them due to local customs. I had to take that path for starters. I did more than a week time test on RAMs and CPU and HDD burning. I will be backing up my data on a remote media.
One other thing I also would like to backup is my configuration file. However, I could not find where that configuration file is. There are a lot of threads mentioning that people backup it nightly for easier and faster restore from a failed USB for example. My read on documentation does not indicate any location or method to save that file.
My questions are:
1- Where is "configuration file" on my system?
2- How can I backup that file?
Thanks & regards,
Ertan