Ismael Duarte
Contributor
- Joined
- Jun 13, 2011
- Messages
- 154
Hi All,
I've this problem once in a while, not very often. I've searched the forum and found some posts about it, but no solutions
Is this a bug or something that I can change to solve it?
Thank you!
Below, the error log and info about my Nas.
I've this problem once in a while, not very often. I've searched the forum and found some posts about it, but no solutions
Is this a bug or something that I can change to solve it?
Thank you!
Below, the error log and info about my Nas.
Code:
May 5 09:33:20 ntpd[2306]: time reset +0.536823 s May 5 09:49:37 ntpd[2306]: time reset +0.406127 s May 5 10:06:09 ntpd[2306]: time reset +0.414072 s May 5 10:27:49 ntpd[2306]: time reset +0.512545 s May 5 10:49:08 ntpd[2306]: time reset +0.512716 s May 5 11:12:51 ntpd[2306]: time reset +0.537167 s May 5 11:22:21 ntpd[2306]: sendto(193.40.133.142) (fd=22): No route to host May 5 11:22:55 kernel: ale0: watchdog timeout -- resetting May 5 11:22:55 syslogd: sendto: No route to host May 5 11:22:55 kernel: ale0: could not disable Tx/Rx MAC(0x00000008)! May 5 11:22:55 syslogd: sendto: No route to host May 5 11:22:55 kernel: ale0: link state changed to DOWN May 5 11:22:55 syslogd: sendto: No route to host May 5 11:22:55 syslogd: sendto: No route to host May 5 11:22:57 kernel: ale0: link state changed to UP May 5 11:37:19 ntpd[2306]: time reset +0.978892 s
Code:
Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.3-RELEASE-p7 #1 r249203M: Sat Apr 6 09:28:27 PDT 2013 root@build.ixsystems.com:/tank/home/jpaetzel/fn8.3/freenas/os-base/amd64/tank/home/jpaetzel/fn8.3/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz (2499.73-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 7516192768 (7168 MB) avail memory = 7220641792 (6886 MB) ACPI APIC Table: <A_M_I_ OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 hpt27xx: RocketRAID 27xx controller driver v1.0 (Apr 6 2013 09:28:15) cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. acpi0: <A_M_I_ OEMRSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of fed08000, 1000 (3) failed acpi0: reservation of fed1c000, 4000 (3) failed acpi0: reservation of fed20000, 20000 (3) failed acpi0: reservation of fed50000, 40000 (3) failed acpi0: reservation of ffc00000, 300000 (3) failed acpi0: reservation of fec00000, 1000 (3) failed acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of e0000000, 10000000 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI Warning: Incorrect checksum in table [OEMB] - 0xCC, should be 0xC3 (20101013/tbutils-354) cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 26.0 on pci0 uhci0: [ITHREAD] usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0 uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 21 at device 26.1 on pci0 uhci1: [ITHREAD] usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1 uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0 uhci2: [ITHREAD] usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0 ehci0: [ITHREAD] usbus3: EHCI version 1.0 usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci4: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SX6121 UDMA133 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f mem 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci3 atapci0: [ITHREAD] ahci0: <Marvell 88SX6121 AHCI SATA controller> at channel -1 on atapci0 ahci0: [ITHREAD] ahci0: AHCI v1.00 with 2 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich0: [ITHREAD] ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich1: [ITHREAD] ata2: <ATA channel> at channel 0 on atapci0 ata2: [ITHREAD] pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0 pci2: <ACPI PCI bus> on pcib4 ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xdc00-0xdc7f mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2 ale0: 960 Tx FIFO, 1024 Rx FIFO ale0: Using 1 MSI messages. miibus0: <MII bus> on ale0 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto ale0: Ethernet address: 00:22:15:a1:db:e8 ale0: [FILTER] uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb080-0xb09f irq 23 at device 29.0 on pci0 uhci3: [ITHREAD] usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3 uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 19 at device 29.1 on pci0 uhci4: [ITHREAD] usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4 uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb480-0xb49f irq 18 at device 29.2 on pci0 uhci5: [ITHREAD] usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5 ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci5: <ACPI PCI bus> on pcib5 fwohci0: <Lucent FW322/323> mem 0xfebff000-0xfebfffff irq 19 at device 3.0 on pci5 fwohci0: [ITHREAD] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:1e:8c:00:01:77:78:e2 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH10 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata3: <ATA channel> at channel 0 on atapci1 ata3: [ITHREAD] ata4: <ATA channel> at channel 1 on atapci1 ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH10 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0 atapci2: [ITHREAD] ata5: <ATA channel> at channel 0 on atapci2 ata5: [ITHREAD] ata6: <ATA channel> at channel 1 on atapci2 ata6: [ITHREAD] acpi_button0: <Power Button> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] orm0: <ISA Option ROM> at iomem 0xc0000-0xcdfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8 Timecounters tick every 1.000 msec hpt27xx: no controller detected.firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 GEOM_RAID5: Module loaded, version 1.1.20110927.40 (rev 00ce00e5abb4) usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ugen7.2: <JetFlash> at usbus7 umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr 2> on usbus7 ada0 at ata5 bus 0 scbus6 target 0 lun 0 ada0: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) da0 at umass-sim0 bus 0 scbus8 target 0 lun 0 da0: <JetFlash Transcend 2GB 1100> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 1920MB (3932160 512 byte sectors: 255H 63S/T 244C) SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! GEOM: da0s1: geometry does not match label (16h,63s != 255h,63s). GEOM: da0s2: geometry does not match label (16h,63s != 255h,63s). Trying to mount root from ufs:/dev/ufs/FreeNASs1a ZFS filesystem version 5 ZFS storage pool version 28 GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: software ale0: watchdog timeout -- resetting ale0: could not disable Tx/Rx MAC(0x00000008)! ale0: link state changed to DOWN ale0: link state changed to UP