fail to attach disk to boot stripe

[tomdavison]

Hello, I didn't have two USB drives for boot when I installed. Now from the boot status view, I select 'stripe' and click 'attach'. The second drive is present in the pick list, but i get the following error:

Error: Failed to attach disk: cannot attach da3p2 to gptid/c38c7397-85d2-11e4-959e-60eb69ba6b4c: no such device in pool

dmesg

Code:

Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p5 #0 3b4abc3: Sun Dec 14 12:56:11 PST 2014
  root@build3.ixsystems.com:/tank/home/jkh/build/93/FN/objs/os-base/amd64/fusion/jkh/93/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU  L5630  @ 2.13GHz (2133.45-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206c2  Family = 0x6  Model = 0x2c  Stepping = 2
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 35433480192 (33792 MB)
avail memory = 33141903360 (31606 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <092010 APIC1715>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads   
 cpu0 (BSP): APIC ID:  0   
 cpu1 (AP): APIC ID:  1   
 cpu2 (AP): APIC ID:  2   
 cpu3 (AP): APIC ID:  3   
 cpu4 (AP): APIC ID: 18   
 cpu5 (AP): APIC ID: 19   
 cpu6 (AP): APIC ID: 20   
 cpu7 (AP): APIC ID: 21   
 cpu8 (AP): APIC ID: 32   
 cpu9 (AP): APIC ID: 33   
 cpu10 (AP): APIC ID: 34   
 cpu11 (AP): APIC ID: 35   
 cpu12 (AP): APIC ID: 50   
 cpu13 (AP): APIC ID: 51   
 cpu14 (AP): APIC ID: 52   
 cpu15 (AP): APIC ID: 53   
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.   
ioapic0: Changing APIC ID to 6   
ioapic1: Changing APIC ID to 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
acpi0: <092010 XSDT1715> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x27, should be 0x24 (20111123/tbutils-290)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mps0: <LSI SAS2008> port 0xc000-0xc0ff mem 0xdf4b0000-0xdf4bffff,0xdf4c0000-0xdf4fffff irq 30 at device 0.0 on pci4
mps0: Firmware: 07.15.08.00, Driver: 16.00.00.00-fbsd
mps0: IOCCapabilities: 185c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,IR>
pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xbc00-0xbc1f irq 23 at device 26.0 on pci0
uhci0: LegSup = 0x2400
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f irq 22 at device 26.1 on pci0
uhci1: LegSup = 0x2400
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb800-0xb81f irq 21 at device 26.2 on pci0
uhci2: LegSup = 0x2400
usbus2 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xdf3de000-0xdf3de3ff irq 20 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xdc00-0xdc1f mem 0xdf6e0000-0xdf6fffff,0xdf6c0000-0xdf6dffff,0xdf69c000-0xdf69ffff irq 16 at device 0.0 on pci6
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: 60:eb:69:ba:6b:4c
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xd880-0xd89f mem 0xdf660000-0xdf67ffff,0xdf640000-0xdf65ffff,0xdf61c000-0xdf61ffff irq 17 at device 0.1 on pci6
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: 60:eb:69:ba:6b:4d
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2400
usbus4 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f irq 22 at device 29.1 on pci0
uhci4: LegSup = 0x2400
usbus5 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xac00-0xac1f irq 21 at device 29.2 on pci0
uhci5: LegSup = 0x2400
usbus6 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xdf3dc000-0xdf3dc3ff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xdf800000-0xdfffffff,0xdf7e0000-0xdf7fffff irq 16 at device 11.0 on pci7
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0xa880-0xa887,0xa800-0xa803,0xa480-0xa487,0xa400-0xa403,0xa080-0xa08f,0xa000-0xa00f irq 18 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Intel ICH10 SATA300 controller> port 0x9880-0x9887,0x9800-0x9803,0x9480-0x9487,0x9400-0x9403,0x9080-0x908f,0x9000-0x900f irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
qpi0: <QPI system bus> on motherboard
pcib8: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib8
pcib9: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib9
ichwd0 on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
wbwd0: <Winbond 83627DHG IC ver. 5> at port 0x2e-0x2f on isa0
ichwd0 at port 0x830-0x837,0x860-0x87f on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
coretemp12: <CPU On-Die Thermal Sensors> on cpu12
est12: <Enhanced SpeedStep Frequency Control> on cpu12
p4tcc12: <CPU Frequency Thermal Control> on cpu12
coretemp13: <CPU On-Die Thermal Sensors> on cpu13
est13: <Enhanced SpeedStep Frequency Control> on cpu13
p4tcc13: <CPU Frequency Thermal Control> on cpu13
coretemp14: <CPU On-Die Thermal Sensors> on cpu14
est14: <Enhanced SpeedStep Frequency Control> on cpu14
p4tcc14: <CPU Frequency Thermal Control> on cpu14
coretemp15: <CPU On-Die Thermal Sensors> on cpu15
est15: <Enhanced SpeedStep Frequency Control> on cpu15
p4tcc15: <CPU Frequency Thermal Control> on cpu15
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
DUMMYNET 0xfffffe0005e4f040 with IPv6 initialized (100409)
load_dn_sched dn_sched FIFO loaded
load_dn_sched dn_sched PRIO loaded
load_dn_sched dn_sched QFQ loaded
load_dn_sched dn_sched RR loaded
load_dn_sched dn_sched WF2Q+ loaded
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
failure at /fusion/jkh/93/FN/FreeBSD/src/sys/dev/mps/mps_sas_lsi.c:667/mpssas_add_device()! Could not get ID for device with handle 0x0009
mpssas_fw_work: failed to add device with handle 0x9
ugen3.2: <Avocent> at usbus3
ukbd0: <Keyboard> on usbus3
kbd2 at ukbd0
ums0: <Mouse> on usbus3
ums0: 3 buttons and [Z] coordinates ID=0
ums1: <Mouse REL> on usbus3
ums1: 3 buttons and [XYZ] coordinates ID=0
ugen7.2: <SanDisk> at usbus7
umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 2> on usbus7
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:6:0:-1: Attached to scbus6
ugen7.3: <SanDisk> at usbus7
umass1: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.26, addr 3> on usbus7
umass1:  SCSI over Bulk-Only; quirks = 0x0100
umass1:7:1:-1: Attached to scbus7
da0 at mps0 bus 0 scbus0 target 3 lun 0
da0: <ATA WDC WD40EZRX-00S 0A80> Fixed Direct Access SCSI-5 device
da0: Serial Number  WD-WCC4E4CL824N
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da0: quirks=0x8<4K>
da1 at mps0 bus 0 scbus0 target 6 lun 0
da1: <ATA WDC WD40EZRX-00S 0A80> Fixed Direct Access SCSI-5 device
da1: Serial Number  WD-WCC4E2PTVTP9
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 3815447MB (7814037168 512 byte sectors: 255H 63S/T 486401C)
da1: quirks=0x8<4K>
da2 at umass-sim0 bus 0 scbus6 target 0 lun 0
da2: <SanDisk Cruzer Fit 1.26> Fixed Direct Access SCSI-6 device
da2: Serial Number 4C530010211031102164
da2: 40.000MB/s transfers
da2: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C)
da2: quirks=0x2<NO_6_BYTE>
ada0 at ata2 bus 0 scbus1 target 1 lun 0
ada0: <WDC WD40EZRX-00SPEB0 80.00A80> ATA-9da3 at umass-sim1 bus 1 scbus7 target 0 lun 0
da3: <SanDisk Cruzer Fit 1.26> Fixed Direct Access SCSI-6 device
da3: Serial Number 4C530009631031102243
da3: 40.000MB/s transfers
da3: 15267MB (31266816 512 byte sectors: 255H 63S/T 1946C)
da3: quirks=0x2<NO_6_BYTE>
 SATA 3.x device
ada0: Serial Number WD-WCC4E3FE1ZJE
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 3815447MB (7814037168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad5
SMP: AP CPU #1 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #14 Launched!
Timecounter "TSC" frequency 2133451724 Hz quality 1000
Trying to mount root from zfs:freenas-boot/ROOT/FreeNAS-9.3-STABLE-201412142326 []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
ipmi0: <IPMI System Interface> on acpi0
ipmi0: unknown resource type
device_attach: ipmi0 attach returned 6
ichwd0 at port 0x830-0x837,0x860-0x87f on isa0
ichwd0: ICH WDT present but disabled in BIOS or hardware
device_attach: ichwd0 attach returned 6
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
ipmi0: IPMI device rev. 1, firmware rev. 1.61, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
vboxdrv: fAsync=0 offMin=0x2ba offMax=0x30af
GEOM_ELI: Device ada0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:  Crypto: hardware
GEOM_ELI: Device da0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:  Crypto: hardware
GEOM_ELI: Device da1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:  Crypto: hardware
GEOM_ELI: Device ada0p1.eli destroyed.
GEOM_ELI: Detached ada0p1.eli on last close.
GEOM_ELI: Device da0p1.eli destroyed.
GEOM_ELI: Detached da0p1.eli on last close.
GEOM_ELI: Device da1p1.eli destroyed.
GEOM_ELI: Detached da1p1.eli on last close.
GEOM_ELI: Device ada0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:  Crypto: hardware
GEOM_ELI: Device da0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:  Crypto: hardware
GEOM_ELI: Device da1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI:  Crypto: hardware

Debug/ixdiagnose attached.

FreeNAS version: FreeNAS 9.3.-STABLE-201412142326
Hardware: DELL C2100 - http://www.dell.com/us/business/p/poweredge-c2100/pd
Motherboard: Intel 5500
CPU: 2x L5630
RAM: 4x 8GB Samsung ECC... ill open it up and get the model if this is actually a ram issue
HD: 3x WD GREEN 4TB WD40EZRX. Single parity stripe
Add-On cards: PERC H200