bonjour, je cherche a installer les outil de vmware sur mon freenas, mais ca me dit que je n'ai pas les droit d’écriture, juste de lecture malgré la commande. pourriez m'indiquer ou je me trompe?
je bloque au gunzip ca m'indique que je n'ai aps les droit malgre la commande mount -urw / qui semble s'etre bien passé
merci
tuto :
- mount the vmware tools CD image to the vm freenas
Go to shell and:
- Create mount point for CD
# mkdir /mnt/cd
# mount -t cd9660 /dev/cd0 /mnt/cd
# ls /mnt/cd
./ manifest.txt ../ vmware-freebsd-tools.tar.gz
- Mount root rw (read/write)
# mount -urw /
- Copy file vmware-freebsd-tools.tar.gz to /tmp , change file permission and gunzip
# cd /mnt/cd
#cp vmware-freebsd-tools.tar.gz /tmp
#chmod 777 /tmp/vmware-freebsd-tools.tar.gz
# gunzip vmware-freebsd-tools.tar.gz/tmp
# tar -xf vmware-freebsd-tools.tar
Look for vmxnet3.ko file in FreeBSD8.1 subdirectory (path below) and copy to /boot/modules
# ls /tmp/vmware-tools-distrib/lib/modules/binary/FreeBSD8.1-amd64
./ ../ vmblock.ko vmmemctl.ko vmxnet.ko vmxnet3.ko
- Add vmxnet3 driver in loader.conf
For loading additional kernel modules (such as drivers) - GUI Tunable is preferred method because your changes will persist across upgrades.
GUI - System - Tunables - Add tunable
... or by manually edit /boot/loader.conf (but you risk losing your config if you upgrade)
# nano /boot/loader.conf
GNU nano 2.2.6 File: /boot/loader.conf
#
# Boot loader file for FreeNAS. This relies on a hacked beastie.4th.
#
autoboot_delay="2"
loader_logo="freenas"
#Fix booting from USB device bug
kern.cam.boot_delay="30000"
#VMXNET3 driver
vmxnet3_load="YES"
Save the corrections by Ctrl+O
Exit nano - Ctrl+X
Shutdown FreeNAS and goto vSphere Client - Edit settings - and add VMXNET3 adapter (I’ve added 2 more)
Start FreeNAS and login - Network Interfaces - Add Interface
Now you can utilize VMXNET3 adapters from drop down menu and well functioning 9K jumbo frames!
je bloque au gunzip ca m'indique que je n'ai aps les droit malgre la commande mount -urw / qui semble s'etre bien passé
merci
tuto :
- mount the vmware tools CD image to the vm freenas
Go to shell and:
- Create mount point for CD
# mkdir /mnt/cd
# mount -t cd9660 /dev/cd0 /mnt/cd
# ls /mnt/cd
./ manifest.txt ../ vmware-freebsd-tools.tar.gz
- Mount root rw (read/write)
# mount -urw /
- Copy file vmware-freebsd-tools.tar.gz to /tmp , change file permission and gunzip
# cd /mnt/cd
#cp vmware-freebsd-tools.tar.gz /tmp
#chmod 777 /tmp/vmware-freebsd-tools.tar.gz
# gunzip vmware-freebsd-tools.tar.gz/tmp
# tar -xf vmware-freebsd-tools.tar
Look for vmxnet3.ko file in FreeBSD8.1 subdirectory (path below) and copy to /boot/modules
# ls /tmp/vmware-tools-distrib/lib/modules/binary/FreeBSD8.1-amd64
./ ../ vmblock.ko vmmemctl.ko vmxnet.ko vmxnet3.ko
- Add vmxnet3 driver in loader.conf
For loading additional kernel modules (such as drivers) - GUI Tunable is preferred method because your changes will persist across upgrades.
GUI - System - Tunables - Add tunable
... or by manually edit /boot/loader.conf (but you risk losing your config if you upgrade)
# nano /boot/loader.conf
GNU nano 2.2.6 File: /boot/loader.conf
#
# Boot loader file for FreeNAS. This relies on a hacked beastie.4th.
#
autoboot_delay="2"
loader_logo="freenas"
#Fix booting from USB device bug
kern.cam.boot_delay="30000"
#VMXNET3 driver
vmxnet3_load="YES"
Save the corrections by Ctrl+O
Exit nano - Ctrl+X
Shutdown FreeNAS and goto vSphere Client - Edit settings - and add VMXNET3 adapter (I’ve added 2 more)
Start FreeNAS and login - Network Interfaces - Add Interface
Now you can utilize VMXNET3 adapters from drop down menu and well functioning 9K jumbo frames!