Kevin Horton
Guru
- Joined
- Dec 2, 2015
- Messages
- 730
I'm running FreeNAS-9.10-STABLE, updated from 9.3-STABLE yesterday, using the update tool in the GUI. The system has been running nicely with 9.10, except for a time issue (subject of another thread to come).
Today I learned about the Verify Install feature, available in System -> Update, so I tried it. It gave me the following output:
I suspect these are false alarms, possibly a relic of the fact that the system was updated from 9.3 to 9.10. How can I determine if I in fact have a problem or not? If the errors are false, how can I update the "Verify Update" function so it works correctly?
Hardware (I doubt it is relevant, but rules are rules):
Motherboard: SuperMicro X10SL7-F
CPU: Intel G3258
RAM: 16G Crucial CT2KIT102472BD160B/CT2CP102472BD160B
PSU: SeaSonic SSR-550RM
Boot USB flash drives:
San Disk Cruzer Fit Usb Flash Drive 16 GB
Kingston 16GB DT Microduo 3C
Hard drives: 5 x Western Digital Red 4 TB in RAIDZ2
Today I learned about the Verify Install feature, available in System -> Update, so I tried it. It gave me the following output:
Code:
The following Inconsistencies were found in your Current Install: List of Checksum Mismatches: /usr/local/etc/afp.conf /usr/local/etc/collectd.conf /usr/local/etc/nginx/nginx.conf /usr/local/etc/proftpd.conf /usr/local/etc/sudoers /usr/local/etc/warden.conf List of Files/Directories/Symlinks not Found: /compat/linux/proc/.donotremove /usr/local/etc/nut/cmdvartab /usr/local/etc/nut/driver.list /usr/local/etc/nut/nut.conf.sample /usr/local/etc/nut/ups.conf.sample /usr/local/etc/nut/upsd.conf.sample /usr/local/etc/nut/upsd.users.sample /usr/local/etc/nut/upsmon.conf.sample /usr/local/etc/nut/upssched.conf.sample List of Permission Errors: /usr/local/etc/warden.conf Expected MODE: 0644, Got: 0600 /compat/linux/proc Expected MODE: 0755, Got: 0555
I suspect these are false alarms, possibly a relic of the fact that the system was updated from 9.3 to 9.10. How can I determine if I in fact have a problem or not? If the errors are false, how can I update the "Verify Update" function so it works correctly?
Hardware (I doubt it is relevant, but rules are rules):
Motherboard: SuperMicro X10SL7-F
CPU: Intel G3258
RAM: 16G Crucial CT2KIT102472BD160B/CT2CP102472BD160B
PSU: SeaSonic SSR-550RM
Boot USB flash drives:
San Disk Cruzer Fit Usb Flash Drive 16 GB
Kingston 16GB DT Microduo 3C
Hard drives: 5 x Western Digital Red 4 TB in RAIDZ2