JIsabelle218
Dabbler
- Joined
- Aug 28, 2011
- Messages
- 13
Greetings all,
I'm trying to upgrade from 8.0.4-p3x64 to 8.2.0p1-x64 using GUI
I've tried re-D/Ling and I'm using "FreeNAS-8.2.0-RELEASE-p1-x64.GUI_Upgrade.xz" and sha256 checksum of "9d035f2def3d4a196084b49c3049f3ef7ba924da4cc45ea6564b70df421b21b8"
Go through all the standard upgrade steps:
Click update firmware, tell it where to save, etc.
Nothing different than I've done in the past. . .
System unpacks and appears to install, reboots twice as usual.
I log back in and FreeNAS Build is still: FreeNAS-8.0.4-RELEASE-p3-x64 (11703)
I tried to copy and paste the console but I couldn't get it all before the reboot below is what I got. . .is this stored anywhere on the drives, I couldn't find. . .and copying and pasting doesn't seem to be the most efficient.
Thanks
I'm trying to upgrade from 8.0.4-p3x64 to 8.2.0p1-x64 using GUI
I've tried re-D/Ling and I'm using "FreeNAS-8.2.0-RELEASE-p1-x64.GUI_Upgrade.xz" and sha256 checksum of "9d035f2def3d4a196084b49c3049f3ef7ba924da4cc45ea6564b70df421b21b8"
Go through all the standard upgrade steps:
Click update firmware, tell it where to save, etc.
Nothing different than I've done in the past. . .
System unpacks and appears to install, reboots twice as usual.
I log back in and FreeNAS Build is still: FreeNAS-8.0.4-RELEASE-p3-x64 (11703)
I tried to copy and paste the console but I couldn't get it all before the reboot below is what I got. . .is this stored anywhere on the drives, I couldn't find. . .and copying and pasting doesn't seem to be the most efficient.
Thanks