Upgrading from FreeNAS Build 8.0.4-p3x64 to 8.2.0p1-x64

[JIsabelle218]

Greetings all,

I'm trying to upgrade from 8.0.4-p3x64 to 8.2.0p1-x64 using GUI

I've tried re-D/Ling and I'm using "FreeNAS-8.2.0-RELEASE-p1-x64.GUI_Upgrade.xz" and sha256 checksum of "9d035f2def3d4a196084b49c3049f3ef7ba924da4cc45ea6564b70df421b21b8"

Go through all the standard upgrade steps:
Click update firmware, tell it where to save, etc.
Nothing different than I've done in the past. . .

System unpacks and appears to install, reboots twice as usual.
I log back in and FreeNAS Build is still: FreeNAS-8.0.4-RELEASE-p3-x64 (11703)

I tried to copy and paste the console but I couldn't get it all before the reboot below is what I got. . .is this stored anywhere on the drives, I couldn't find. . .and copying and pasting doesn't seem to be the most efficient.

Thanks

 

[sully]

I didn't have success doing a GUI upgrade, from 8.0.4 > 8.2 with the .xz, I needed to use the .txz. I believe something was changed, I can't recall the post with the details, but mentioned something about post 8.0.2 (i think) update recommended you use the .txz GUI upgrade file.

 

[ben]

8.0.4 to 8.2.0 should be the XZ. Only 8.2.0 beta 3 and later require TXZ to upgrade.