lomilomi
Dabbler
- Joined
- Jan 30, 2016
- Messages
- 22
I've been using Freenas for over a year with no major issues. Slowly learning the ins and outs. I'm currently in a state of fear.
On Tuesday morning kicked off the update for the latest stable release. Upon my return in the evening the WebGui and SSH port weren't accessible. Jails were non-responsive as well. Connected a monitor to my server and saw that the new boot partition was failing to load. Reverted back to the previous 4.14 version and was able to get to a shell and the boot partition repaired an error that occured. At this point no jails were running. More distressingly all the datasets have 0 data in them as well. df reports the capacity at 0% as well.
Thanks in advance for any help or support.
Richard
zpool status shows the pools are all online.
Here are the boot messages:
On Tuesday morning kicked off the update for the latest stable release. Upon my return in the evening the WebGui and SSH port weren't accessible. Jails were non-responsive as well. Connected a monitor to my server and saw that the new boot partition was failing to load. Reverted back to the previous 4.14 version and was able to get to a shell and the boot partition repaired an error that occured. At this point no jails were running. More distressingly all the datasets have 0 data in them as well. df reports the capacity at 0% as well.
Thanks in advance for any help or support.
Richard
Code:
df /mnt/main Filesystem 1K-blocks Used Avail Capacity Mounted on main 1882401316 112 1882401204 0% /mnt/main
zpool status shows the pools are all online.
Code:
~# zpool status main pool: main state: ONLINE scan: scrub repaired 0 in 6h26m with 0 errors on Fri Apr 15 08:26:33 2016 config: NAME STATE READ WRITE CKSUM main ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/d78e99e1-80ce-11e4-86c0-bc5ff4653672 ONLINE 0 0 0 gptid/d7e0fe28-80ce-11e4-86c0-bc5ff4653672 ONLINE 0 0 0 errors: No known data errors
Here are the boot messages:
Code:
~# dmesg Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE #0 1b72f49(HEAD): Wed Apr 13 23:35:10 PDT 2016 root@build.ixsystems.com:/tank/home/nightlies/CVE910/_BE/objs/tank/home/nightlies/CVE910/_BE/trueos/sys/FreeNAS.amd64 amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (3292.60-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 9384755200 (8950 MB) avail memory = 8157331456 (7779 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 random: <Software, Yarrow> initialized WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: No AESNI support. padlock0: No ACE support. acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7c00000-0xf7c3ffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device pci1: <multimedia, HDA> at device 0.1 (no driver attached) vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <IvyBridge desktop GT1 IG> on vgapci1 agp0: aperture size is 256M, detected 65532k stolen memory xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7d18000-0xf7d183ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: bc:5f:f4:65:36:72 pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7d17000-0xf7d173ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d16000-0xf7d167ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ichwd0: <Intel Panther Point watchdog timer> on isa0 wbwd0: <Nuvoton NCT6776 (0xc3/0x33) Watchdog Timer> at port 0x2e-0x2f on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <Intel> at usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <0x8086> at usbus0 uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: 8 ports with 8 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen2.2: <vendor 0x8087> at usbus2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ugen2.3: <Lexar> at usbus2 umass0: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 3> on usbus2 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:7:0:-1: Attached to scbus7 ugen1.3: <Kingston> at usbus1 umass1: <Kingston DataTraveler 3.0, class 0/0, rev 2.10/1.00, addr 3> on usbus1 umass1: SCSI over Bulk-Only; quirks = 0xc100 umass1:8:1:-1: Attached to scbus8 ugen2.4: <Lexar> at usbus2 umass2: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 4> on usbus2 umass2: SCSI over Bulk-Only; quirks = 0x8100 umass2:9:2:-1: Attached to scbus9 ugen1.4: <StarTech.com> at usbus1 umass3: <StarTech.com S2510SM12U33, class 0/0, rev 2.10/1.00, addr 4> on usbus1 umass3: SCSI over Bulk-Only; quirks = 0x0100 umass3:10:3:-1: Attached to scbus10 ugen1.5: <Lexar> at usbus1 umass4: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 5> on usbus1 umass4: SCSI over Bulk-Only; quirks = 0x8100 umass4:11:4:-1: Attached to scbus11 ugen1.6: <Lexar> at usbus1 umass5: <Lexar USB Flash Drive, class 0/0, rev 2.00/11.00, addr 6> on usbus1 umass5: SCSI over Bulk-Only; quirks = 0x8100 umass5:12:5:-1: Attached to scbus12 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST2000NM0011 SN03> ATA8-ACS SATA 3.x device ada0: Serial Number Z1P68F9S ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors) ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD20EURS-73TLHY0 80.00A80> ACS-2 ATA SATA 2.x device ada1: Serial Number WD-WCC4M2003580 ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD10EZEX-60ZF5A0 80.00A80> ACS-2 ATA SATA 3.x device ada2: Serial Number WD-WCC1S8141130 ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: Command Queueing enabled ada2: 953869MB (1953525168 512 byte sectors) ada2: Previously was known as ad8 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD10EZEX-22BN5A0 01.01A01> ACS-2 ATA SATA 3.x device ada3: Serial Number WD-WCC3F7VNRNSK ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 953869MB (1953525168 512 byte sectors) ada3: Previously was known as ad10 ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <WDC WD40EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device ada4: Serial Number WD-WCC4EPPLUDT9 ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 3815447MB (7814037168 512 byte sectors) ada4: quirks=0x1<4K> ada4: Previously was known as ad12 ada5 at ahcich5 bus 0 scbus5 target 0 lun 0 ada5: <WDC WD40EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device ada5: Serial Number WD-WCC4E5ESC9P7 ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 3815447MB (7814037168 512 byte sectors) ada5: quirks=0x1<4K> ada5: Previously was known as ad14 da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device da0: Serial Number AA042T3SUJM90N2V da0: 40.000MB/s transfers da0: 15276MB (31285248 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> da2 at umass-sim2 bus 2 scbus9 target 0 lun 0 da2: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device da2: Serial Number AA0FBNHGRGW06A74 da2: 40.000MB/s transfers da2: 15276MB (31285248 512 byte sectors) da2: quirks=0x2<NO_6_BYTE> da1 at umass-sim1 bus 1 scbus8 target 0 lun 0 da1: <Kingston DataTraveler 3.0 PMAP> Removable Direct Access SPC-4 SCSI device da1: Serial Number 08606E6D4080BF11470D229A da1: 40.000MB/s transfers da1: 15004MB (30728832 512 byte sectors) da1: quirks=0x2<NO_6_BYTE> da3 at umass-sim3 bus 3 scbus10 target 0 lun 0 da3: <ASMT 2105 0> Fixed Direct Access SPC-4 SCSI device da3: Serial Number 1401146307F5 da3: 40.000MB/s transfers da3: 152627MB (312581808 512 byte sectors) da3: quirks=0x2<NO_6_BYTE> da4 at umass-sim4 bus 4 scbus11 target 0 lun 0 da4: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device da4: Serial Number AA48RE5REYZ60WXX da4: 40.000MB/s transfers da4: 15276MB (31285248 512 byte sectors) da4: quirks=0x2<NO_6_BYTE> da5 at umass-sim5 bus 5 scbus12 target 0 lun 0 da5: <Lexar USB Flash Drive 1100> Removable Direct Access SPC-2 SCSI device da5: Serial Number AA04KYDUINF7VYRS da5: 40.000MB/s transfers da5: 15276MB (31285248 512 byte sectors) da5: quirks=0x2<NO_6_BYTE> SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1646298336 Hz quality 1000 Trying to mount root from zfs:freenas-boot/ROOT/9.10-STABLE-201604140622 []... GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) re0: link state changed to UP hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> re0: link state changed to DOWN re0: link state changed to UP vboxdrv: fAsync=0 offMin=0x244 offMax=0xe34 GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada1p1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada2p1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada3p1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device ada4p1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software GEOM_ELI: Device da3p1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software