Upgrade from 11.0-U4 to 11.1-U4 and SCSI FC share is gone...

Status
Not open for further replies.

cirss

Cadet
Joined
Feb 7, 2013
Messages
5
Hi, Folks!
6 years FreeNAS user, first help post here. Upgraded from 11.0-U4 to 11.1-U4, system works fine except SCSI share was gone. Reversed back to 11.0-U4, share is back.

Hardware: AsRock E3C226D2I, 16GB ECC ram, G3240, 4xST8000VX0022 as RAIDZ, 1xKingston KC300 as SCSI target for win 2012R2 trough Qlogic fibre channel QLE2462.

All worked fine till upgrade but not in 11.1-U4. And after downgrade back, also works fine. So question - any suggests whats wrong with my setup or it is included in software change - no more FC support whatsoever?

Best regards,
Cirss

Boot log below:
Code:
 
Mar 29 19:51:15 nas Copyright (c) 1992-2017 The FreeBSD Project.
Mar 29 19:51:15 nas Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Mar 29 19:51:15 nas	 The Regents of the University of California. All rights reserved.
Mar 29 19:51:15 nas FreeBSD is a registered trademark of The FreeBSD Foundation.
Mar 29 19:51:15 nas FreeBSD 11.1-STABLE #2 r321665+366f54a78b2(freenas/11.1-stable): Wed Mar 21 23:04:13 UTC 2018
Mar 29 19:51:15 nas root@gauntlet:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
Mar 29 19:51:15 nas FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn)
Mar 29 19:51:15 nas CPU: Intel(R) Pentium(R) CPU G3240 @ 3.10GHz (3093.16-MHz K8-class CPU)
Mar 29 19:51:15 nas Origin="GenuineIntel"  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
Mar 29 19:51:15 nas Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Mar 29 19:51:15 nas Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND>
Mar 29 19:51:15 nas AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Mar 29 19:51:15 nas AMD Features2=0x21<LAHF,ABM>
Mar 29 19:51:15 nas Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG>
Mar 29 19:51:15 nas XSAVE Features=0x1<XSAVEOPT>
Mar 29 19:51:15 nas VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Mar 29 19:51:15 nas TSC: P-state invariant, performance statistics
Mar 29 19:51:15 nas real memory  = 17985175552 (17152 MB)
Mar 29 19:51:15 nas avail memory = 16521416704 (15756 MB)
Mar 29 19:51:15 nas Event timer "LAPIC" quality 600
Mar 29 19:51:15 nas ACPI APIC Table: <ALASKA A M I>
Mar 29 19:51:15 nas FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Mar 29 19:51:15 nas FreeBSD/SMP: 1 package(s) x 2 core(s)
Mar 29 19:51:15 nas WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Mar 29 19:51:15 nas ioapic0 <Version 2.0> irqs 0-23 on motherboard
Mar 29 19:51:15 nas SMP: AP CPU #1 Launched!
Mar 29 19:51:15 nas Timecounter "TSC-low" frequency 1546578980 Hz quality 1000
Mar 29 19:51:15 nas random: entropy device external interface
Mar 29 19:51:15 nas kbd1 at kbdmux0
Mar 29 19:51:15 nas module_register_init: MOD_LOAD (vesa, 0xffffffff80fc74c0, 0) error 19
Mar 29 19:51:15 nas random: registering fast source Intel Secure Key RNG
Mar 29 19:51:15 nas random: fast provider: "Intel Secure Key RNG"
Mar 29 19:51:15 nas nexus0
Mar 29 19:51:15 nas cryptosoft0: <software crypto> on motherboard
Mar 29 19:51:15 nas aesni0: No AESNI support.
Mar 29 19:51:15 nas padlock0: No ACE support.
Mar 29 19:51:15 nas acpi0: <ALASKA A M I> on motherboard
Mar 29 19:51:15 nas acpi0: Power Button (fixed)
Mar 29 19:51:15 nas cpu0: <ACPI CPU> on acpi0
Mar 29 19:51:15 nas cpu1: <ACPI CPU> on acpi0
Mar 29 19:51:15 nas hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Mar 29 19:51:15 nas Timecounter "HPET" frequency 14318180 Hz quality 950
Mar 29 19:51:15 nas Event timer "HPET" frequency 14318180 Hz quality 550
Mar 29 19:51:15 nas Event timer "HPET1" frequency 14318180 Hz quality 440
Mar 29 19:51:15 nas Event timer "HPET2" frequency 14318180 Hz quality 440
Mar 29 19:51:15 nas Event timer "HPET3" frequency 14318180 Hz quality 440
Mar 29 19:51:15 nas Event timer "HPET4" frequency 14318180 Hz quality 440
Mar 29 19:51:15 nas Event timer "HPET5" frequency 14318180 Hz quality 440
Mar 29 19:51:15 nas Event timer "HPET6" frequency 14318180 Hz quality 440
Mar 29 19:51:15 nas atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Mar 29 19:51:15 nas atrtc0: Warning: Couldn't map I/O.
Mar 29 19:51:15 nas atrtc0: registered as a time-of-day clock, resolution 1.000000s
Mar 29 19:51:15 nas Event timer "RTC" frequency 32768 Hz quality 0
Mar 29 19:51:15 nas attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Mar 29 19:51:15 nas Timecounter "i8254" frequency 1193182 Hz quality 0
Mar 29 19:51:15 nas Event timer "i8254" frequency 1193182 Hz quality 100
Mar 29 19:51:15 nas Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Mar 29 19:51:15 nas acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
Mar 29 19:51:15 nas pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Mar 29 19:51:15 nas pcib0: _OSC returned error 0x10
Mar 29 19:51:15 nas pci0: <ACPI PCI bus> on pcib0
Mar 29 19:51:15 nas pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
Mar 29 19:51:15 nas pci1: <ACPI PCI bus> on pcib1
Mar 29 19:51:15 nas isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0xe100-0xe1ff mem 0xf7384000-0xf7387fff irq 16 at device 0.0 on pci1
Mar 29 19:51:15 nas isp0: Chan 0 setting role to 0x0
Mar 29 19:51:15 nas isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0xe000-0xe0ff mem 0xf7380000-0xf7383fff irq 17 at device 0.1 on pci1
Mar 29 19:51:15 nas isp1: Chan 0 setting role to 0x0
Mar 29 19:51:15 nas pci0: <simple comms> at device 22.0 (no driver attached)
Mar 29 19:51:15 nas pci0: <simple comms> at device 22.1 (no driver attached)
Mar 29 19:51:15 nas ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7404000-0xf74043ff irq 16 at device 26.0 on pci0
Mar 29 19:51:15 nas usbus0: EHCI version 1.0
Mar 29 19:51:15 nas usbus0 on ehci0
Mar 29 19:51:15 nas usbus0: 480Mbps High Speed USB v2.0
Mar 29 19:51:15 nas pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Mar 29 19:51:15 nas pcib2: [GIANT-LOCKED]
Mar 29 19:51:15 nas pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
Mar 29 19:51:15 nas pci2: <ACPI PCI bus> on pcib3
Mar 29 19:51:15 nas igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xf7200000-0xf727ffff,0xf7280000-0xf7283fff irq 18 at device 0.0 on pci2
Mar 29 19:51:15 nas igb0: Using MSIX interrupts with 3 vectors
Mar 29 19:51:15 nas igb0: Ethernet address: d0:50:99:46:c7:64
Mar 29 19:51:15 nas igb0: Bound queue 0 to cpu 0
Mar 29 19:51:15 nas igb0: Bound queue 1 to cpu 1
Mar 29 19:51:15 nas pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
Mar 29 19:51:15 nas pci3: <ACPI PCI bus> on pcib4
Mar 29 19:51:15 nas igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 19 at device 0.0 on pci3
Mar 29 19:51:15 nas igb1: Using MSIX interrupts with 3 vectors
Mar 29 19:51:15 nas igb1: Ethernet address: d0:50:99:46:c7:65
Mar 29 19:51:15 nas igb1: Bound queue 0 to cpu 0
Mar 29 19:51:15 nas igb1: Bound queue 1 to cpu 1
Mar 29 19:51:15 nas pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
Mar 29 19:51:15 nas pci4: <ACPI PCI bus> on pcib5
Mar 29 19:51:15 nas pcib6: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4
Mar 29 19:51:15 nas pci5: <ACPI PCI bus> on pcib6
Mar 29 19:51:15 nas vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 19 at device 0.0 on pci5
Mar 29 19:51:15 nas vgapci0: Boot video device
Mar 29 19:51:15 nas ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7403000-0xf74033ff irq 23 at device 29.0 on pci0
Mar 29 19:51:15 nas usbus1: EHCI version 1.0
Mar 29 19:51:15 nas usbus1 on ehci1
Mar 29 19:51:15 nas usbus1: 480Mbps High Speed USB v2.0
Mar 29 19:51:15 nas isab0: <PCI-ISA bridge> at device 31.0 on pci0
Mar 29 19:51:15 nas isa0: <ISA bus> on isab0
Mar 29 19:51:15 nas ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7402000-0xf74027ff irq 19 at device 31.2 on pci0
Mar 29 19:51:15 nas ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
Mar 29 19:51:15 nas ahcich0: <AHCI channel> at channel 0 on ahci0
Mar 29 19:51:15 nas ahcich1: <AHCI channel> at channel 1 on ahci0
Mar 29 19:51:15 nas ahcich2: <AHCI channel> at channel 2 on ahci0
Mar 29 19:51:15 nas ahcich3: <AHCI channel> at channel 3 on ahci0
Mar 29 19:51:15 nas ahcich4: <AHCI channel> at channel 4 on ahci0
Mar 29 19:51:15 nas ahcich5: <AHCI channel> at channel 5 on ahci0
Mar 29 19:51:15 nas acpi_button0: <Power Button> on acpi0
Mar 29 19:51:15 nas uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Mar 29 19:51:15 nas uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
Mar 29 19:51:15 nas ichwd0: <Intel Lynx Point watchdog timer> on isa0
Mar 29 19:51:15 nas wbwd0: <Nuvoton NCT6776 (0xc3/0x33) Watchdog Timer> at port 0x2e-0x2f on isa0
Mar 29 19:51:15 nas orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
Mar 29 19:51:15 nas sc0: <System console> at flags 0x100 on isa0
Mar 29 19:51:15 nas sc0: CGA <16 virtual consoles, flags=0x300>
Mar 29 19:51:15 nas vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
Mar 29 19:51:15 nas atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
Mar 29 19:51:15 nas atkbd0: <AT Keyboard> irq 1 on atkbdc0
Mar 29 19:51:15 nas kbd0 at atkbd0
Mar 29 19:51:15 nas atkbd0: [GIANT-LOCKED]
Mar 29 19:51:15 nas coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Mar 29 19:51:15 nas est0: <Enhanced SpeedStep Frequency Control> on cpu0
Mar 29 19:51:15 nas coretemp1: <CPU On-Die Thermal Sensors> on cpu1
Mar 29 19:51:15 nas est1: <Enhanced SpeedStep Frequency Control> on cpu1
Mar 29 19:51:15 nas ZFS filesystem version: 5
Mar 29 19:51:15 nas ZFS storage pool version: features support (5000)
Mar 29 19:51:15 nas Timecounters tick every 1.000 msec
Mar 29 19:51:15 nas freenas_sysctl: adding account.
Mar 29 19:51:15 nas freenas_sysctl: adding directoryservice.
Mar 29 19:51:15 nas freenas_sysctl: adding middlewared.
Mar 29 19:51:15 nas freenas_sysctl: adding network.
Mar 29 19:51:15 nas freenas_sysctl: adding services.
Mar 29 19:51:15 nas ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Mar 29 19:51:15 nas ugen0.1: <Intel EHCI root HUB> at usbus0
Mar 29 19:51:15 nas ugen1.1: <Intel EHCI root HUB> at usbus1
Mar 29 19:51:15 nas uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Mar 29 19:51:15 nas uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Mar 29 19:51:15 nas uhub1: 2 ports with 2 removable, self powered
Mar 29 19:51:15 nas uhub0: 2 ports with 2 removable, self powered
Mar 29 19:51:15 nas ugen0.2: <vendor 0x8087 product 0x8008> at usbus0
Mar 29 19:51:15 nas uhub2 on uhub0
Mar 29 19:51:15 nas uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0
Mar 29 19:51:15 nas ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
Mar 29 19:51:15 nas uhub3 on uhub1
Mar 29 19:51:15 nas uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1
Mar 29 19:51:15 nas uhub2: 6 ports with 6 removable, self powered
Mar 29 19:51:15 nas uhub3: 8 ports with 8 removable, self powered
Mar 29 19:51:15 nas ugen1.3: <American Megatrends Inc. Virtual Hub> at usbus1
Mar 29 19:51:15 nas uhub4 on uhub3
Mar 29 19:51:15 nas uhub4: <7-port Hub> on usbus1
Mar 29 19:51:15 nas uhub4: 5 ports with 5 removable, self powered
Mar 29 19:51:15 nas ugen0.3: <Kingston DataTraveler 108> at usbus0
Mar 29 19:51:15 nas umass0 on uhub2
Mar 29 19:51:15 nas umass0: <Kingston DataTraveler 108, class 0/0, rev 2.00/1.00, addr 3> on usbus0
Mar 29 19:51:15 nas umass0:  SCSI over Bulk-Only; quirks = 0xc100
Mar 29 19:51:15 nas umass0:9:0: Attached to scbus9
Mar 29 19:51:15 nas ugen1.4: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus1
Mar 29 19:51:15 nas ukbd0 on uhub4
Mar 29 19:51:15 nas ukbd0: <Keyboard Interface> on usbus1
Mar 29 19:51:15 nas kbd2 at ukbd0
Mar 29 19:51:15 nas ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
Mar 29 19:51:15 nas da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
Mar 29 19:51:15 nas ada0: <ST8000VX0022-2EJ112 AV01> ACS-3 ATA SATA 3.x device
Mar 29 19:51:15 nas ada0: Serial Number ZA1590KB
Mar 29 19:51:15 nas ada0: 600.000MB/s transfersda0: <Kingston DataTraveler 108 PMAP> Removable Direct Access SCSI device
Mar 29 19:51:15 nas (SATA 3.x, UDMA6, PIO 8192bytes)
Mar 29 19:51:15 nas ada0: Command Queueing enabled
Mar 29 19:51:15 nas ada0: 7630885MB (15628053168 512 byte sectors)
Mar 29 19:51:15 nas ada1 at ahcich1 bus 0 scbus3 target 0 lun 0
Mar 29 19:51:15 nas da0: Serial Number 001E4FB765BBBC20F7700098
Mar 29 19:51:15 nas da0: 40.000MB/s transfers
Mar 29 19:51:15 nas da0: 14996MB (30712320 512 byte sectors)
Mar 29 19:51:15 nas ada1: <KINGSTON SKC300S37A240G 526ABBF0> ATA8-ACS SATA 3.x device
Mar 29 19:51:15 nas ada1: Serial Number 50026B72460916DB
Mar 29 19:51:15 nas ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Mar 29 19:51:15 nas ada1: Command Queueing enabled
Mar 29 19:51:15 nas ada1: 228936MB (468862128 512 byte sectors)
Mar 29 19:51:15 nas da0: quirks=0x2<NO_6_BYTE>
Mar 29 19:51:15 nas ada2 at ahcich3 bus 0 scbus5 target 0 lun 0
Mar 29 19:51:15 nas ada2: <ST8000VX0022-2EJ112 AV01> ACS-3 ATA SATA 3.x device
Mar 29 19:51:15 nas ada2: Serial Number ZA158PJ4
Mar 29 19:51:15 nas ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Mar 29 19:51:15 nas ada2: Command Queueing enabled
Mar 29 19:51:15 nas ada2: 7630885MB (15628053168 512 byte sectors)
Mar 29 19:51:15 nas ada3 at ahcich4 bus 0 scbus6 target 0 lun 0
Mar 29 19:51:15 nas ada3: <ST8000VX0022-2EJ112 AV01> ACS-3 ATA SATA 3.x device
Mar 29 19:51:15 nas ada3: Serial Number ZA158Z7P
Mar 29 19:51:15 nas ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Mar 29 19:51:15 nas ada3: Command Queueing enabled
Mar 29 19:51:15 nas ada3: 7630885MB (15628053168 512 byte sectors)
Mar 29 19:51:15 nas ada4 at ahcich5 bus 0 scbus7 target 0 lun 0
Mar 29 19:51:15 nas ada4: <ST8000VX0022-2EJ112 AV01> ACS-3 ATA SATA 3.x device
Mar 29 19:51:15 nas ada4: Serial Number ZA1590FV
Mar 29 19:51:15 nas ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Mar 29 19:51:15 nas ada4: Command Queueing enabled
Mar 29 19:51:15 nas ada4: 7630885MB (15628053168 512 byte sectors)
Mar 29 19:51:15 nas random: unblocking device.
Mar 29 19:51:15 nas Trying to mount root from zfs:freenas-boot/ROOT/11.1-U4 []...
Mar 29 19:51:15 nas kernel: igb0: link state changed to UP
Mar 29 19:51:15 nas kernel: igb0: link state changed to UP
Mar 29 19:51:15 nas kernel: igb1: link state changed to UP
Mar 29 19:51:15 nas kernel: igb1: link state changed to UP
Mar 29 19:51:15 nas ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
Mar 29 19:51:15 nas ipmi0: KCS mode found at io 0xca2 on acpi
Mar 29 19:51:15 nas ipmi0: IPMI device rev. 1, firmware rev. 0.28, version 2.0
Mar 29 19:51:15 nas ipmi0: Number of channels 2
Mar 29 19:51:15 nas ipmi0: Attached watchdog
Mar 29 19:51:15 nas GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
Mar 29 19:51:15 nas GEOM_MIRROR: Device mirror/swap0 launched (2/2).
Mar 29 19:51:15 nas GEOM_MIRROR: Device mirror/swap1 launched (2/2).
Mar 29 19:51:15 nas GEOM_ELI: Device mirror/swap0.eli created.
Mar 29 19:51:15 nas GEOM_ELI: Encryption: AES-XTS 128
Mar 29 19:51:15 nas GEOM_ELI:	 Crypto: software
Mar 29 19:51:15 nas GEOM_ELI: Device mirror/swap1.eli created.
Mar 29 19:51:15 nas GEOM_ELI: Encryption: AES-XTS 128
Mar 29 19:51:15 nas GEOM_ELI:	 Crypto: software
Mar 29 19:51:15 nas hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/8/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
Mar 29 19:51:15 nas kernel: igb0: link state changed to DOWN
Mar 29 19:51:15 nas kernel: igb0: link state changed to DOWN
Mar 29 19:51:15 nas kernel: igb0: link state changed to UP
Mar 29 19:51:15 nas kernel: igb0: link state changed to UP
Mar 29 19:51:15 nas kernel: igb1: link state changed to DOWN
Mar 29 19:51:15 nas kernel: igb1: link state changed to DOWN
Mar 29 19:51:15 nas kernel: igb1: link state changed to UP
Mar 29 19:51:15 nas kernel: igb1: link state changed to UP
Mar 29 19:51:15 nas ums0 on uhub4
Mar 29 19:51:15 nas ums0: <Mouse Interface> on usbus1
Mar 29 19:51:15 nas ums0: 3 buttons and [Z] coordinates ID=0
Mar 29 19:51:18 nas ctld[1929]: LUN creation warning: error opening /dev/ada1: 1
Mar 29 19:51:23 nas nfsd: can't register svc name
Mar 29 19:51:24 nas ntpd[2194]: ntpd 4.2.8p10-a (1): Starting
Mar 29 19:51:32 nas root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Mar 29 19:51:37 nas root: /etc/rc: WARNING: failed precmd routine for minio
Mar 29 19:51:37 nas smartd[2762]: Unable to register device /dev/da0 (no Directive -d removable). Exiting.
Mar 29 19:51:48 nas mountd[2112]: unknown group: 
Mar 29 19:51:52 nas ctlfe_onoffline: isp0 current WWNN 0x2000001b3213dca9
Mar 29 19:51:52 nas ctlfe_onoffline: isp0 current WWPN 0x2100001b3213dca9
Mar 29 19:51:52 nas ctlfe_onoffline: isp0 (path id 0) target role enable succeeded
Mar 29 19:51:52 nas ctlfe_onoffline: isp1 current WWNN 0x2000001b3233dca9
Mar 29 19:51:52 nas ctlfe_onoffline: isp1 current WWPN 0x2101001b3233dca9
Mar 29 19:51:52 nas ctlfe_onoffline: isp1 (path id 1) target role enable succeeded
Mar 29 19:51:52 nas ctlfeasync: WWPN 0x5001438001333e58 port 0x0000ef path 0 target 0 arrived
Mar 29 19:51:53 nas ctlfeasync: WWPN 0x5001438001333e5a port 0x0000ef path 1 target 0 arrived

 

cirss

Cadet
Joined
Feb 7, 2013
Messages
5
Did you figure this out?
What was a cause to lose scsi FC target - no idea. But I did work-around: copied from target data, switched off scsi service, erased scsi share configuration, upgraded to FreeNAS 11.1-U4, created target/share back, copied data back. All works for now.
 
Status
Not open for further replies.
Top