Syner9y
Cadet
- Joined
- Jan 11, 2016
- Messages
- 5
Hello all. Sorry for the long post, but I wasn't sure what else to do. First of all, I tried reading as much as I could about all of this over the past couple months as I didn't want to clutter up the forum with previously answered questions. However, I am at a point where I am unsure of the best way forward and I could really use some assistance. I will admit I do not know as much about FreeNAS as I should, however I am not afraid to learn so if you just want to provide a resource where I can find the answer, it would be much appreciated.
My specific issue is about 6-9 months ago, I began getting strange messages from my FreeNAS daily log output emails (unfortunately, I did not save these). At the time, I was busy with grad school, so after a quick glance which made it look like a drive was failing, I shut the NAS down until I could spend more time on it. Fast-forward to 2 months ago, when I finally had time to boot it back up. The first thing I had to fix was it would not boot up as the boot drive, an mSATA, was not even on the list of boot devices, so I had to go into the BIOS to fix that. Then, once resolved, there were about 10-12 versions of FreeNAS to choose to boot into, so I picked the most recent and then cleared the older ones once into the GUI.
At this point, everything seemed to work, minus an alert in the GUI. However, on March 19th, I got the following log email:
I viewed the errors and they were about metadata, which from reading other's similar troubles, looked like I would need to wipe and restore from backup to resolve. However, I did not have backups (as the NAS is primarily for transient files that I don't mind losing) so I wanted to try other possibilities first. I cleared the errors, restarted the NAS and waited as everything still seemed to work.
3 days later, I got this email:
I then found a similar post someone made, where as a part of debugging, someone else wanted the smart report to be ran, which I did (I don't have that report right now but if you feel it's pertinent, I will re-run and post it). However, this did not provide me with anything noticeable in terms of problems so I chose to ignore it as everything else still worked without issue.
Finally, a couple days ago, one of my jails (I have 2, a Transmission one that is problematic and a MySQL one that is working) began acting up when I was attempting to update software. I couldn't do much as everything I tried, even running ls, gave me the same error:
I saw another post by someone that had a similar issue where restarting the box resolved it, so I did that. However, now I cannot even get into the jail as I get the following when I run jexec 2:
Fortunately, I can still access all the files in the jail from outside of the jail, and it sounds like from other posts, that my only option now is to delete the jail and re-create it. Sorry for the long post, but I wanted to be thorough. At this point, I have a couple questions I'm hoping you can help with so I don't further muck this up:
EDIT: Oops, forgot to mention I am running FreeNAS 9.10.2-STABLE
My specific issue is about 6-9 months ago, I began getting strange messages from my FreeNAS daily log output emails (unfortunately, I did not save these). At the time, I was busy with grad school, so after a quick glance which made it look like a drive was failing, I shut the NAS down until I could spend more time on it. Fast-forward to 2 months ago, when I finally had time to boot it back up. The first thing I had to fix was it would not boot up as the boot drive, an mSATA, was not even on the list of boot devices, so I had to go into the BIOS to fix that. Then, once resolved, there were about 10-12 versions of FreeNAS to choose to boot into, so I picked the most recent and then cleared the older ones once into the GUI.
At this point, everything seemed to work, minus an alert in the GUI. However, on March 19th, I got the following log email:
Code:
Checking status of zfs pools: NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT freenas-boot 14.9G 3.62G 11.3G - - 24% 1.00x ONLINE - oldboot 14.5T 3.69T 10.8T - 14% 25% 1.00x ONLINE /mnt pool: oldboot state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://illumos.org/msg/ZFS-8000-8A scan: scrub in progress since Sun Mar 19 00:00:00 2017 3.48T scanned out of 3.69T at 336M/s, 0h10m to go 0 repaired, 94.40% done config: NAME STATE READ WRITE CKSUM oldboot ONLINE 0 0 0 gptid/9c95aa50-7d71-11e5-b959-d050996a0ef8 ONLINE 0 0 0 gptid/9d504809-7d71-11e5-b959-d050996a0ef8 ONLINE 0 0 0 gptid/27c71147-9bae-11e5-8053-d050996a0ef8 ONLINE 0 0 0 gptid/28c17a02-9bae-11e5-8053-d050996a0ef8 ONLINE 0 0 0 spares gptid/6cea195f-b743-11e5-84fe-d050996a0ef8 AVAIL errors: 5 data errors, use '-v' for a list -- End of daily output --
I viewed the errors and they were about metadata, which from reading other's similar troubles, looked like I would need to wipe and restore from backup to resolve. However, I did not have backups (as the NAS is primarily for transient files that I don't mind losing) so I wanted to try other possibilities first. I cleared the errors, restarted the NAS and waited as everything still seemed to work.
3 days later, I got this email:
Code:
freenas.local kernel log messages: > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 a0 fb ad 40 67 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 cf 74 40 d7 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b8 d6 fb 40 19 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 78 92 0b 40 1e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 3d 68 40 1e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 c8 8d 10 40 1f 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 00 c0 78 40 22 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 40 a0 39 f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 c0 06 74 40 a5 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 d0 d6 9c 40 a8 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 64 b8 40 52 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 00 9f d6 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 30 8d 1c 40 1f 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 44 a5 40 1a 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 78 a3 cd 40 65 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 e8 65 ea 40 6c 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 80 67 b6 40 8d 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 00 72 97 40 09 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 05 7f 40 73 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 48 75 f3 40 c1 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 c0 b4 26 40 09 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 08 ad 89 40 1b 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 40 20 61 f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 06 79 40 ab 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 68 ab d9 40 82 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 c4 a0 40 6d 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 80 5b c6 40 47 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 8f 7e 40 87 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 40 eb d6 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 30 90 70 f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 80 2a 79 40 1d 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 10 54 a3 40 65 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 86 1d 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 7d cc 40 0b 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 20 06 95 40 0b 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f0 47 78 40 04 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 20 04 50 40 fa 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 58 87 5e 40 00 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 30 c8 7c f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 48 8c d1 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 7d cc 40 0b 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 20 06 95 40 0b 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f0 47 78 40 04 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 20 04 50 40 fa 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 58 87 5e 40 00 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 40 d8 7d f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 40 a2 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 48 3e 6d 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 c0 a8 f3 4d 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 40 a2 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 48 3e 6d 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 40 a2 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 48 3e 6d 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 48 8f d1 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 40 a2 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 48 3e 6d 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 48 90 d1 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 5d 5c 40 5e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 40 fa ae 40 a5 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 48 91 d1 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 68 fb 9f 40 fa 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 6a 82 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 22 2e 40 67 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 68 fb 9f 40 fa 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 6a 82 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 22 2e 40 67 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 5d 5c 40 5e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 40 fa ae 40 a5 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 48 91 d1 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 80 58 7e f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 68 fb 9f 40 fa 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 98 6a 82 40 08 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 22 2e 40 67 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 18 5d 5c 40 5e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 40 fa ae 40 a5 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 18 50 00 d7 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 37 1a 40 8f 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b0 68 12 40 f4 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 b5 e1 40 3e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 40 18 7f f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 b5 e1 40 3e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 40 18 7f f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 37 1a 40 8f 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b0 68 12 40 f4 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 37 1a 40 8f 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b0 68 12 40 f4 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 b5 e1 40 3e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 c0 a8 f4 4d 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 37 1a 40 8f 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b0 68 12 40 f4 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 b5 e1 40 3e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 e0 88 f4 4d 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 37 1a 40 8f 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Error 5, Retries exhausted > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b0 68 12 40 f4 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Error 5, Retries exhausted > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 50 b5 e1 40 3e 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Error 5, Retries exhausted > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 48 95 d1 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 f8 37 1a 40 8f 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 30 58 7f f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 d8 29 bf 40 05 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 e0 25 47 40 6a 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 c0 1b 7d 40 05 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 38 d4 b8 40 0b 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 78 5c 2c 40 01 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 f8 c5 c4 40 07 01 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 b0 b9 2c 40 f4 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): READ_FPDMA_QUEUED. ACB: 60 08 68 7d ee 40 8a 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 40 b8 7f f2 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 68 30 d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 c0 58 29 4e 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 68 37 d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 68 38 d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 08 f0 db 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 50 20 31 fb 40 40 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 20 f0 db 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 28 50 f0 db 40 42 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 68 3a d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 68 3a d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 68 3a d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 c8 3e d3 40 42 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > tun0: link state changed to DOWN > tun0: link state changed to UP > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 18 18 a2 64 40 43 00 00 00 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 70 a2 64 40 43 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 78 a3 64 40 43 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command > (ada2:ahcich2:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 00 90 b0 64 40 43 00 00 01 00 00 > (ada2:ahcich2:0:0:0): CAM status: Uncorrectable parity/CRC error > (ada2:ahcich2:0:0:0): Retrying command -- End of security output --
I then found a similar post someone made, where as a part of debugging, someone else wanted the smart report to be ran, which I did (I don't have that report right now but if you feel it's pertinent, I will re-run and post it). However, this did not provide me with anything noticeable in terms of problems so I chose to ignore it as everything else still worked without issue.
Finally, a couple days ago, one of my jails (I have 2, a Transmission one that is problematic and a MySQL one that is working) began acting up when I was attempting to update software. I couldn't do much as everything I tried, even running ls, gave me the same error:
Code:
Shared object "libncurses.so.8" not found, required by "ls"
I saw another post by someone that had a similar issue where restarting the box resolved it, so I did that. However, now I cannot even get into the jail as I get the following when I run jexec 2:
Code:
Shared object "libncurses.so.8" not found, required by "csh"
Fortunately, I can still access all the files in the jail from outside of the jail, and it sounds like from other posts, that my only option now is to delete the jail and re-create it. Sorry for the long post, but I wanted to be thorough. At this point, I have a couple questions I'm hoping you can help with so I don't further muck this up:
- Am I correct in my assumption that this jail is hosed and needs to be deleted and then re-installed? If not, what should be done to correct this?
- There are a lot of configs in this jail I would like to preserve before deleting. What is the best way to save the contents of the jail so I can restore specific files once it is recreated? Is copying it on the NAS the best approach, trying to ftp it off, plugging in a USB drive, etc? I suppose best in this case means full backup of the jail's files in the quickest/easiest way.
- What happened to my NAS? I know I messed around a lot once one thing went wrong and I am perfectly willing to accept I brought this on myself. However, a bigger question I have is is it possible an HD or other hardware component is failing? Or was it simply that one or two files got corrupted and then in trying to fix it, I made it much, much worse?
EDIT: Oops, forgot to mention I am running FreeNAS 9.10.2-STABLE