I've 2 freenas boxes that I'm trying to setup with ipv6. Both have a lagg0 interface (LACP), one's running 11.2-U7 and the other 11.2-U6 . I'm fairly new to IPv6 but other devices on LAN are getting address from a pfsense DHCPv6 server with the router in managed mode.
Here's what I've tried till now:
1. I've checked auto configure ipv6 in web gui and I got a link-local address and a default name server -> no global address.
service rtsold was running
2. Added to system tunables type rc.conf:
Variable: ifconfig_lagg0_ipv6 Value: inet6 accept_rtadv auto_linklocal
Variable: rtsold_enable Value: YES
Now I'm not getting anything ipv6 related and ifconfig shows:
service rtsold was running
3. removed variable rtsold_enable and unchecked ipv6 autoconfig in web ui.
I'm getting ipv6 link-local, default route, and nameserver, but no global address.
4. disabled ipv4 dhcp on interface and set static IP - no change
Here's what I've tried till now:
1. I've checked auto configure ipv6 in web gui and I got a link-local address and a default name server -> no global address.
service rtsold was running
2. Added to system tunables type rc.conf:
Variable: ifconfig_lagg0_ipv6 Value: inet6 accept_rtadv auto_linklocal
Variable: rtsold_enable Value: YES
Now I'm not getting anything ipv6 related and ifconfig shows:
nd6 options=2b<PERFORMNUD,ACCEPT_RTADV,IFDISABLED,AUTO_LINKLOCAL>
service rtsold was running
3. removed variable rtsold_enable and unchecked ipv6 autoconfig in web ui.
I'm getting ipv6 link-local, default route, and nameserver, but no global address.
4. disabled ipv4 dhcp on interface and set static IP - no change