Windows7ge
Contributor
- Joined
- Sep 26, 2017
- Messages
- 124
This is a college project I'm working on. The equipment I'm working with is a mix of my own and what the college has on hand. Due to this I'm unable to give the specifics of the equipment and I'm only able to test anything when I'm actually there.
What details I can give off memory:
The CPU is an AMD FM2+ A10 series. Exactly which I'm not sure
2x8GB DDR3 memory (speed, timing, not sure)
Motherboard: GIGABYTE GA-F2A58M-DS2 (This may have to do with the issue so I looked this up.)
6x 160GB WD BLue, 2x 500GB WD Green
I installed a Mellanox Connect X2 card in both the server and client machine.
I installed a SYBA SI-PEX40064 (so I could have a total of 8 SATA ports)
After all sorts of hardware problems (equipment the college "threw away") I got the 10Gbit network working with SMB.
As a Proof-of-Concept I would also like to implement a 1Gbit SMB client, an iSCSI client on the 1Gbit network, and demonstrate port forwarding on a router from another network to access SSH/SFTP on the server. All of these I already know how to do.
Like the title says. The servers 1Gbit NIC refuses to be recognized on the network. it shows up on the server
Server IP: 192.168.0.254/24 (Static & reserved)
Clients: 192.168.0.2/24, .3/24
The server can ping it's own loopback. I tested ALL the cables, switch/router, other clients can ping each other. The 10Gbit network can ping the server but the onboard NIC just refuses to interact with any other device. The NIC is enabled in the BIOS and the NICs enabled and activity indicator LEDs say it's doing something.
I'm asking for troubleshooting ideas for when I return next week.
What details I can give off memory:
The CPU is an AMD FM2+ A10 series. Exactly which I'm not sure
2x8GB DDR3 memory (speed, timing, not sure)
Motherboard: GIGABYTE GA-F2A58M-DS2 (This may have to do with the issue so I looked this up.)
6x 160GB WD BLue, 2x 500GB WD Green
I installed a Mellanox Connect X2 card in both the server and client machine.
I installed a SYBA SI-PEX40064 (so I could have a total of 8 SATA ports)
After all sorts of hardware problems (equipment the college "threw away") I got the 10Gbit network working with SMB.
As a Proof-of-Concept I would also like to implement a 1Gbit SMB client, an iSCSI client on the 1Gbit network, and demonstrate port forwarding on a router from another network to access SSH/SFTP on the server. All of these I already know how to do.
Like the title says. The servers 1Gbit NIC refuses to be recognized on the network. it shows up on the server
re0
I can give it an IP through the console window on the server itself and it'll say I can access the WebUI from that IP. The only problem is I can't. No device can ping the server. The server can't ping any device.Server IP: 192.168.0.254/24 (Static & reserved)
Clients: 192.168.0.2/24, .3/24
The server can ping it's own loopback. I tested ALL the cables, switch/router, other clients can ping each other. The 10Gbit network can ping the server but the onboard NIC just refuses to interact with any other device. The NIC is enabled in the BIOS and the NICs enabled and activity indicator LEDs say it's doing something.
I'm asking for troubleshooting ideas for when I return next week.