diedrichg
Wizard
- Joined
- Dec 4, 2012
- Messages
- 1,319
Hi. Yes, I've searched. Yes I've read. The suggestions and solutions out there are not working. I'm obviously doing something wrong. Please help.
I'm using FreeNAS-8.3.0-RELEASE-x64
The other day I took a drive in the raidz1 pool offline via the GUI to attempt to correct some errors
I now want to bring the drive back online to have the raidz1 back to full functionality but the usual commands are not working. Here is what I have after a zpool status -v:
Here are all the attempts at bringing the drive back ONLINE:
What is the proper syntax? When I perform just zpool online 13681489071282867862 it says I'm using it incorrectly
Am I missing something really obvious? Thanks.
I'm using FreeNAS-8.3.0-RELEASE-x64
The other day I took a drive in the raidz1 pool offline via the GUI to attempt to correct some errors
Dec 18 13:31:16 freenas smartd[2462]: Device: /dev/ada3, 9 Currently unreadable (pending) sectors
Dec 18 13:31:16 freenas smartd[2462]: Device: /dev/ada3, 9 Offline uncorrectable sectors
I now want to bring the drive back online to have the raidz1 back to full functionality but the usual commands are not working. Here is what I have after a zpool status -v:
Code:
status: One or more devices has been taken offline by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Online the device using 'zpool online' or replace the device with 'zpool replace'. scan: none requested config: NAME STATE READ WRITE CKS UM guenther DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 gptid/9ed006bc-3e2c-11e2-a2f0-902b349b289a ONLINE 0 0 0 gptid/9f5c3bef-3e2c-11e2-a2f0-902b349b289a ONLINE 0 0 0 13681489071282867862 OFFLINE 0 0 0 was /dev/dsk/gptid/f9d6fcfd-4922-11e2-9f56-902b349b289a errors: No known data errors
Here are all the attempts at bringing the drive back ONLINE:
Code:
zpool online 13681489071282867862 zpool online -e raidz1-0 13681489071282867862 zpool online dev/dsk/gptid/f9d6fcfd-4922-11e2-9f56-902b349b289a zpool online 13681489071282867862 ada3p2 zpool online dev/dsk/gptid/f9d6fcfd-4922-11e2-9f56-902b349b289a ada3p2 zpool online f9d6fcfd-4922-11e2-9f56-902b349b289a ada3p2 zpool replace 13681489071282867862 ada3
What is the proper syntax? When I perform just zpool online 13681489071282867862 it says I'm using it incorrectly
Code:
[root@freenas ~]# zpool online 13681489071282867862 missing device name usage: online [-e] <pool> <device> ...
Am I missing something really obvious? Thanks.