Jason Hamilton
Contributor
- Joined
- Jul 4, 2013
- Messages
- 141
So in looking at the messages log. I see the following
But my zpool status shows
So are these errors just false reports? Would a scrub of the volume possibly fix this?
The disk 1 and 2 for whatever reason show up as multipaths for some reason or another
I don't know why they show up as multipath and I can't access the tab in the gui for the multipath because it just loads a blank page.
I'm currently using Freenas 8.3.1-RELEASE-p2-x64
Thank you all in advance for your help with this.
Code:
Aug 5 09:36:52 freenas smartd[25766]: Device: /dev/ada1, 2 Currently unreadable (pending) sectors Aug 5 09:36:52 freenas smartd[25766]: Device: /dev/ada1, 2 Offline uncorrectable sectors
But my zpool status shows
Code:
pool: tbone state: ONLINE scan: scrub repaired 0 in 4h27m with 0 errors on Sun Jul 21 05:27:11 2013 config: NAME STATE READ WRITE CKSUM tbone ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 gptid/9ae42f9a-e473-11e2-ae83-003048d4ab7a ONLINE 0 0 0 gptid/9b8af27f-e473-11e2-ae83-003048d4ab7a ONLINE 0 0 0 gptid/9c177a3e-e473-11e2-ae83-003048d4ab7a ONLINE 0 0 0 gptid/3a35dfa9-eaa7-11e2-9d64-003048d4ab7a ONLINE 0 0 0 errors: No known data errors
So are these errors just false reports? Would a scrub of the volume possibly fix this?
The disk 1 and 2 for whatever reason show up as multipaths for some reason or another
Code:
freenas# gmultipath status Name Status Components multipath/disk2 DEGRADED ada1 (ACTIVE) multipath/disk1 DEGRADED ada3 (ACTIVE)
I don't know why they show up as multipath and I can't access the tab in the gui for the multipath because it just loads a blank page.
I'm currently using Freenas 8.3.1-RELEASE-p2-x64
Thank you all in advance for your help with this.