DenisInternet
Dabbler
- Joined
- Jun 14, 2022
- Messages
- 28
Hello folks,
I am having trouble getting a connection and accessing the TrueNAS Scale UI via my 25Gb SFP28 connections. It looks like it sees the NIC but I am not sure, I am watching/reading guides to settings this all up correctly.
*UPDATE* Ended up being two things that were causing the issue.
1) I needed to create a separate bridge for my router connections and a second bridge for my LAN 25Gb SFP28 connections on my Microtik switch using Winbox.
2) On Winbox interfaces I needed to make sure I was hardware offloading the SFP28 connections on my switch.
Hopefully this helps anyone else struggling with setting up their Network Config :)
OS: TrueNAS SCALE
CPU: AMD EPYC 7302p+
Motherboard: Supermicro H12SSL-i
Switch: MikroTik CRS504-4XQ-IN
NIC 1: Supermicro AOC-S25G-B2S Rev 1.01 25GbE 2-Port PCIe 3.0 x8 Network Adapter (in NAS box)
NIC 2: Sonnet Twin25G Dual 25G SFP28 to Thunderbolt 3 Adapter (Connected to a Mac Studio)
Thank you for your time and guidance.
*updated post, *updated post again.
I am having trouble getting a connection and accessing the TrueNAS Scale UI via my 25Gb SFP28 connections. It looks like it sees the NIC but I am not sure, I am watching/reading guides to settings this all up correctly.
*UPDATE* Ended up being two things that were causing the issue.
1) I needed to create a separate bridge for my router connections and a second bridge for my LAN 25Gb SFP28 connections on my Microtik switch using Winbox.
2) On Winbox interfaces I needed to make sure I was hardware offloading the SFP28 connections on my switch.
Hopefully this helps anyone else struggling with setting up their Network Config :)
OS: TrueNAS SCALE
CPU: AMD EPYC 7302p+
Motherboard: Supermicro H12SSL-i
Switch: MikroTik CRS504-4XQ-IN
NIC 1: Supermicro AOC-S25G-B2S Rev 1.01 25GbE 2-Port PCIe 3.0 x8 Network Adapter (in NAS box)
NIC 2: Sonnet Twin25G Dual 25G SFP28 to Thunderbolt 3 Adapter (Connected to a Mac Studio)
Thank you for your time and guidance.
*updated post, *updated post again.
Last edited: