TrippLite LCDT-Series UPS 1500VA won't detect...

[michaelcr79]

I have a TrippLite 1500 LCDT ups that does not detect. It supposedly should work with usbhid-ups, but it doesn't. I'm having trouble using the same unit on Fedora 29 as well with NUT. The unit is brand new.

 

[Redcoat]

Not trying to insult, but have you tried more than one USB cable?

 

[Arwen]

I had to use a less common USB driver, (which I don't remember now). The menu entries were not correct for me. Had to type it in on the FreeNAS GUI, to get my UPS working.

 

[michaelcr79]

I tried the cable that came with the unit. There are many TrippLite ups'es, but none seem to match on FreeNAS the LCDT series unit I have.

 

[michaelcr79]

T: Bus=08 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=09ae ProdID=3016 Rev=00.02
S: Manufacturer=Tripp Lite
S: Product=TRIPP LITE UPS
S: SerialNumber=2818BVLOM87C500473
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none)

The above is the output of usb-devices on Fedora 29 with the exact same type and model of ups connected.

 

[michaelcr79]

I wonder if no UPS is found because my FreeNAS mini is USB3 enabled and too fast?

Are all the USB ports on my FreeNAS mini USB3?