Smartd does not start on H730P - empty smartd.conf

Status
Not open for further replies.
K

Kranken

Cadet
Joined
Aug 12, 2018
Messages
3
Hello.
On my Dell server I have PERC H730P Adapter switch to HBA. The smartd fails to start at boot and manually. /usr/local/etc/smartd.conf is empty
I try turn off smart to da5 or add -d removable to S.M.A.R.T. extra options: - smartd fails to start.
Try this on FreeNAS-11.1-U5 and current test on FreeNAS-11.1-U6. Same result.
What can I do to repair smartd to generate /usr/local/etc/smartd.conf

Code:
# camcontrol devlist
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 0 lun 0 (pass0,da0)
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 1 lun 0 (pass1,da1)
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 2 lun 0 (pass2,da2)
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 3 lun 0 (pass3,da3)
<SEAGATE ST300MP0026 KT37>		 at scbus15 target 5 lun 0 (pass4,da4)
<DP BP14G+ 4.26>				   at scbus15 target 32 lun 0 (ses0,pass5)
<ADATA USB Flash Drive 1100>	   at scbus17 target 0 lun 0 (pass6,da5)

Code:
# /etc/ix.rc.d/ix-smartd start
# /etc/ix.rc.d/ix-smartd status
ix-smartd is not running.

Code:
# cat /var/log/messages | grep smart
Sep  3 10:39:49 NAS01 smartd[2711]: Configuration file /usr/local/etc/smartd.conf parsed but has no entries
Sep  3 10:55:16 NAS01 smartd[5696]: Configuration file /usr/local/etc/smartd.conf parsed but has no entries
Sep  3 20:00:53 NAS01 smartd[39281]: Configuration file /usr/local/etc/smartd.conf parsed but has no entries

Code:
# cat /usr/local/etc/smartd.conf
################################################
# smartd.conf generated by /etc/ix.rc.d/ix-smartd
################################################

Code:
# smartctl -i /dev/da0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:			   SEAGATE
Product:			  ST1200MM0099
Revision:			 ST31
Compliance:		   SPC-4
User Capacity:		1,200,243,695,616 bytes [1.20 TB]
Logical block size:   512 bytes
Formatted with type 2 protection
LU is fully provisioned
Rotation Rate:		10000 rpm
Form Factor:		  2.5 inches
Logical Unit id:	  0x5000c500b82aeec7
Serial number:		WFK0TS72
Device type:		  disk
Transport protocol:   SAS (SPL-3)
Local Time is:		Mon Sep  3 19:40:01 2018 CEST
SMART support is:	 Available - device has SMART capability.
SMART support is:	 Enabled
Temperature Warning:  Enabled

# smartctl -i /dev/da1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:			   SEAGATE
Product:			  ST1200MM0099
Revision:			 ST31
Compliance:		   SPC-4
User Capacity:		1,200,243,695,616 bytes [1.20 TB]
Logical block size:   512 bytes
Formatted with type 2 protection
LU is fully provisioned
Rotation Rate:		10000 rpm
Form Factor:		  2.5 inches
Logical Unit id:	  0x5000c500b829ade3
Serial number:		WFK0SYWH
Device type:		  disk
Transport protocol:   SAS (SPL-3)
Local Time is:		Mon Sep  3 19:40:22 2018 CEST
SMART support is:	 Available - device has SMART capability.
SMART support is:	 Enabled
Temperature Warning:  Disabled or Not Supported

# smartctl -i /dev/da2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:			   SEAGATE
Product:			  ST1200MM0099
Revision:			 ST31
Compliance:		   SPC-4
User Capacity:		1,200,243,695,616 bytes [1.20 TB]
Logical block size:   512 bytes
Formatted with type 2 protection
LU is fully provisioned
Rotation Rate:		10000 rpm
Form Factor:		  2.5 inches
Logical Unit id:	  0x5000c500b829f4e3
Serial number:		WFK0TVEX
Device type:		  disk
Transport protocol:   SAS (SPL-3)
Local Time is:		Mon Sep  3 19:40:50 2018 CEST
SMART support is:	 Available - device has SMART capability.
SMART support is:	 Enabled
Temperature Warning:  Disabled or Not Supported

# smartctl -i /dev/da3
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:			   SEAGATE
Product:			  ST1200MM0099
Revision:			 ST31
Compliance:		   SPC-4
User Capacity:		1,200,243,695,616 bytes [1.20 TB]
Logical block size:   512 bytes
Formatted with type 2 protection
LU is fully provisioned
Rotation Rate:		10000 rpm
Form Factor:		  2.5 inches
Logical Unit id:	  0x5000c500b82a214b
Serial number:		WFK0TTJQ
Device type:		  disk
Transport protocol:   SAS (SPL-3)
Local Time is:		Mon Sep  3 19:40:59 2018 CEST
SMART support is:	 Available - device has SMART capability.
SMART support is:	 Enabled
Temperature Warning:  Disabled or Not Supported

# smartctl -i /dev/da4
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:			   SEAGATE
Product:			  ST300MP0026
Revision:			 KT37
Compliance:		   SPC-4
User Capacity:		300,000,000,000 bytes [300 GB]
Logical block size:   512 bytes
Formatted with type 2 protection
LU is fully provisioned
Rotation Rate:		15000 rpm
Form Factor:		  2.5 inches
Logical Unit id:	  0x5000c500b875d91b
Serial number:		WAE0Q7YK
Device type:		  disk
Transport protocol:   SAS (SPL-3)
Local Time is:		Mon Sep  3 19:41:03 2018 CEST
SMART support is:	 Available - device has SMART capability.
SMART support is:	 Enabled
Temperature Warning:  Enabled


----------------------
When I add SATA disk, result is the same. /usr/local/etc/smartd.conf is empty
Code:
# camcontrol devlist
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 0 lun 0 (pass0,da0)
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 1 lun 0 (pass1,da1)
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 2 lun 0 (pass2,da2)
<SEAGATE ST1200MM0099 ST31>		at scbus15 target 3 lun 0 (pass3,da3)
<ATA WDC WD20EARX-00P AB51>		at scbus15 target 5 lun 0 (pass4,da4)
<DP BP14G+ 4.26>				   at scbus15 target 32 lun 0 (ses0,pass5)
<ADATA USB Flash Drive 1100>	   at scbus17 target 0 lun 0 (pass6,da5)

Code:
# smartctl -i /dev/da4
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:	 Western Digital Green
Device Model:	 WDC WD20EARX-00PASB0
Serial Number:	WD-WCAZAF479174
LU WWN Device Id: 5 0014ee 207284631																																													
Firmware Version: 51.0AB51																																																			
User Capacity:	2,000,398,934,016 bytes [2.00 TB]																																									
Sector Sizes:	 512 bytes logical, 4096 bytes physical																																							 
Device is:		In smartctl database [for details use: -P show]																																					
ATA Version is:   ATA8-ACS (minor revision not indicated)																																						
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)																																							
Local Time is:	Tue Sep  4 09:34:41 2018 CEST																																										
SMART support is: Available - device has SMART capability.																																					
SMART support is: Enabled
 
Last edited by a moderator:
Ericloewe

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
What's the output of pciconf -l?
 
K

Kranken

Cadet
Joined
Aug 12, 2018
Messages
3
This is output:
Code:
# pciconf -l
hostb0@pci0:0:0:0:	  class=0x060000 card=0x00008086 chip=0x20208086 rev=0x04 hdr=0x00
none0@pci0:0:5:0:	   class=0x088000 card=0x00008086 chip=0x20248086 rev=0x04 hdr=0x00
none1@pci0:0:5:2:	   class=0x088000 card=0x00000000 chip=0x20258086 rev=0x04 hdr=0x00
ioapic0@pci0:0:5:4:	 class=0x080020 card=0x20268086 chip=0x20268086 rev=0x04 hdr=0x00
none2@pci0:0:8:0:	   class=0x088000 card=0x00008086 chip=0x20148086 rev=0x04 hdr=0x00
none3@pci0:0:8:1:	   class=0x110100 card=0x00008086 chip=0x20158086 rev=0x04 hdr=0x00
none4@pci0:0:8:2:	   class=0x088000 card=0x00008086 chip=0x20168086 rev=0x04 hdr=0x00
none5@pci0:0:17:0:	  class=0xff0000 card=0x07ca1028 chip=0xa1ec8086 rev=0x09 hdr=0x00
ahci0@pci0:0:17:5:	  class=0x010601 card=0x07ca1028 chip=0xa1d28086 rev=0x09 hdr=0x00
xhci0@pci0:0:20:0:	  class=0x0c0330 card=0x07ca1028 chip=0xa1af8086 rev=0x09 hdr=0x00
none6@pci0:0:20:2:	  class=0x118000 card=0x07ca1028 chip=0xa1b18086 rev=0x09 hdr=0x00
none7@pci0:0:22:0:	  class=0x078000 card=0x07ca1028 chip=0xa1ba8086 rev=0x09 hdr=0x00
none8@pci0:0:22:1:	  class=0x078000 card=0x07ca1028 chip=0xa1bb8086 rev=0x09 hdr=0x00
none9@pci0:0:22:4:	  class=0x078000 card=0x07ca1028 chip=0xa1be8086 rev=0x09 hdr=0x00
ahci1@pci0:0:23:0:	  class=0x010601 card=0x07ca1028 chip=0xa1828086 rev=0x09 hdr=0x00
pcib1@pci0:0:28:0:	  class=0x060400 card=0x07ca1028 chip=0xa1908086 rev=0xf9 hdr=0x01
pcib2@pci0:0:28:4:	  class=0x060400 card=0x07ca1028 chip=0xa1948086 rev=0xf9 hdr=0x01
pcib4@pci0:0:28:5:	  class=0x060400 card=0x07ca1028 chip=0xa1958086 rev=0xf9 hdr=0x01
isab0@pci0:0:31:0:	  class=0x060100 card=0x07ca1028 chip=0xa1c18086 rev=0x09 hdr=0x00
none10@pci0:0:31:2:	 class=0x058000 card=0x07ca1028 chip=0xa1a18086 rev=0x09 hdr=0x00
none11@pci0:0:31:4:	 class=0x0c0500 card=0x07ca1028 chip=0xa1a38086 rev=0x09 hdr=0x00
none12@pci0:0:31:5:	 class=0x0c8000 card=0x07ca1028 chip=0xa1a48086 rev=0x09 hdr=0x00
pcib3@pci0:2:0:0:	   class=0x060400 card=0x00000000 chip=0xbe001556 rev=0x02 hdr=0x01
vgapci0@pci0:3:0:0:	 class=0x030000 card=0x07ca1028 chip=0x0536102b rev=0x04 hdr=0x00
bge0@pci0:4:0:0:		class=0x020000 card=0x001f1028 chip=0x165f14e4 rev=0x00 hdr=0x00
bge1@pci0:4:0:1:		class=0x020000 card=0x001f1028 chip=0x165f14e4 rev=0x00 hdr=0x00
pcib6@pci0:22:2:0:	  class=0x060400 card=0x00008086 chip=0x20328086 rev=0x04 hdr=0x01
none13@pci0:22:5:0:	 class=0x088000 card=0x00008086 chip=0x20348086 rev=0x04 hdr=0x00
none14@pci0:22:5:2:	 class=0x088000 card=0x00000000 chip=0x20358086 rev=0x04 hdr=0x00
ioapic1@pci0:22:5:4:	class=0x080020 card=0x20368086 chip=0x20368086 rev=0x04 hdr=0x00
none15@pci0:22:8:0:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none16@pci0:22:8:1:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none17@pci0:22:8:2:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none18@pci0:22:8:3:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none19@pci0:22:8:4:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none20@pci0:22:8:5:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none21@pci0:22:8:6:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none22@pci0:22:8:7:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none23@pci0:22:9:0:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none24@pci0:22:9:1:	 class=0x088000 card=0x00008086 chip=0x208d8086 rev=0x04 hdr=0x00
none25@pci0:22:14:0:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none26@pci0:22:14:1:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none27@pci0:22:14:2:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none28@pci0:22:14:3:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none29@pci0:22:14:4:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none30@pci0:22:14:5:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none31@pci0:22:14:6:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none32@pci0:22:14:7:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none33@pci0:22:15:0:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none34@pci0:22:15:1:	class=0x088000 card=0x00008086 chip=0x208e8086 rev=0x04 hdr=0x00
none35@pci0:22:29:0:	class=0x088000 card=0x00008086 chip=0x20548086 rev=0x04 hdr=0x00
none36@pci0:22:29:1:	class=0x088000 card=0x00008086 chip=0x20558086 rev=0x04 hdr=0x00
none37@pci0:22:29:2:	class=0x088000 card=0x00008086 chip=0x20568086 rev=0x04 hdr=0x00
none38@pci0:22:29:3:	class=0x088000 card=0x00008086 chip=0x20578086 rev=0x04 hdr=0x00
none39@pci0:22:30:0:	class=0x088000 card=0x00008086 chip=0x20808086 rev=0x04 hdr=0x00
none40@pci0:22:30:1:	class=0x088000 card=0x00008086 chip=0x20818086 rev=0x04 hdr=0x00
none41@pci0:22:30:2:	class=0x088000 card=0x00008086 chip=0x20828086 rev=0x04 hdr=0x00
none42@pci0:22:30:3:	class=0x088000 card=0x00008086 chip=0x20838086 rev=0x04 hdr=0x00
none43@pci0:22:30:4:	class=0x088000 card=0x00008086 chip=0x20848086 rev=0x04 hdr=0x00
none44@pci0:22:30:5:	class=0x088000 card=0x00008086 chip=0x20858086 rev=0x04 hdr=0x00
none45@pci0:22:30:6:	class=0x088000 card=0x00008086 chip=0x20868086 rev=0x04 hdr=0x00
mrsas0@pci0:23:0:0:	 class=0x010400 card=0x1f421028 chip=0x005d1000 rev=0x02 hdr=0x00
none46@pci0:100:5:0:	class=0x088000 card=0x00008086 chip=0x20348086 rev=0x04 hdr=0x00
none47@pci0:100:5:2:	class=0x088000 card=0x00000000 chip=0x20358086 rev=0x04 hdr=0x00
ioapic2@pci0:100:5:4:   class=0x080020 card=0x20368086 chip=0x20368086 rev=0x04 hdr=0x00
none48@pci0:100:8:0:	class=0x088000 card=0x00008086 chip=0x20668086 rev=0x04 hdr=0x00
none49@pci0:100:9:0:	class=0x088000 card=0x00008086 chip=0x20668086 rev=0x04 hdr=0x00
none50@pci0:100:10:0:   class=0x088000 card=0x00008086 chip=0x20408086 rev=0x04 hdr=0x00
none51@pci0:100:10:1:   class=0x088000 card=0x00008086 chip=0x20418086 rev=0x04 hdr=0x00
none52@pci0:100:10:2:   class=0x088000 card=0x00008086 chip=0x20428086 rev=0x04 hdr=0x00
none53@pci0:100:10:3:   class=0x088000 card=0x00008086 chip=0x20438086 rev=0x04 hdr=0x00
none54@pci0:100:10:4:   class=0x088000 card=0x00008086 chip=0x20448086 rev=0x04 hdr=0x00
none55@pci0:100:10:5:   class=0x088000 card=0x00008086 chip=0x20458086 rev=0x04 hdr=0x00
none56@pci0:100:10:6:   class=0x088000 card=0x00008086 chip=0x20468086 rev=0x04 hdr=0x00
none57@pci0:100:10:7:   class=0x088000 card=0x00008086 chip=0x20478086 rev=0x04 hdr=0x00
none58@pci0:100:11:0:   class=0x088000 card=0x00008086 chip=0x20488086 rev=0x04 hdr=0x00
none59@pci0:100:11:1:   class=0x088000 card=0x00008086 chip=0x20498086 rev=0x04 hdr=0x00
none60@pci0:100:11:2:   class=0x088000 card=0x00008086 chip=0x204a8086 rev=0x04 hdr=0x00
none61@pci0:100:11:3:   class=0x088000 card=0x00008086 chip=0x204b8086 rev=0x04 hdr=0x00
none62@pci0:100:12:0:   class=0x088000 card=0x00008086 chip=0x20408086 rev=0x04 hdr=0x00
none63@pci0:100:12:1:   class=0x088000 card=0x00008086 chip=0x20418086 rev=0x04 hdr=0x00
none64@pci0:100:12:2:   class=0x088000 card=0x00008086 chip=0x20428086 rev=0x04 hdr=0x00
none65@pci0:100:12:3:   class=0x088000 card=0x00008086 chip=0x20438086 rev=0x04 hdr=0x00
none66@pci0:100:12:4:   class=0x088000 card=0x00008086 chip=0x20448086 rev=0x04 hdr=0x00
none67@pci0:100:12:5:   class=0x088000 card=0x00008086 chip=0x20458086 rev=0x04 hdr=0x00
none68@pci0:100:12:6:   class=0x088000 card=0x00008086 chip=0x20468086 rev=0x04 hdr=0x00
none69@pci0:100:12:7:   class=0x088000 card=0x00008086 chip=0x20478086 rev=0x04 hdr=0x00
none70@pci0:100:13:0:   class=0x088000 card=0x00008086 chip=0x20488086 rev=0x04 hdr=0x00
none71@pci0:100:13:1:   class=0x088000 card=0x00008086 chip=0x20498086 rev=0x04 hdr=0x00
none72@pci0:100:13:2:   class=0x088000 card=0x00008086 chip=0x204a8086 rev=0x04 hdr=0x00
none73@pci0:100:13:3:   class=0x088000 card=0x00008086 chip=0x204b8086 rev=0x04 hdr=0x00
none74@pci0:178:5:0:	class=0x088000 card=0x00008086 chip=0x20348086 rev=0x04 hdr=0x00
none75@pci0:178:5:2:	class=0x088000 card=0x00000000 chip=0x20358086 rev=0x04 hdr=0x00
ioapic3@pci0:178:5:4:   class=0x080020 card=0x20368086 chip=0x20368086 rev=0x04 hdr=0x00
none76@pci0:178:14:0:   class=0x110100 card=0x00008086 chip=0x20588086 rev=0x04 hdr=0x00
none77@pci0:178:14:1:   class=0x088000 card=0x00008086 chip=0x20598086 rev=0x04 hdr=0x00
none78@pci0:178:15:0:   class=0x110100 card=0x00008086 chip=0x20588086 rev=0x04 hdr=0x00
none79@pci0:178:15:1:   class=0x088000 card=0x00008086 chip=0x20598086 rev=0x04 hdr=0x00
none80@pci0:178:18:0:   class=0x110100 card=0x00008086 chip=0x204c8086 rev=0x04 hdr=0x00
none81@pci0:178:18:1:   class=0x110100 card=0x00008086 chip=0x204d8086 rev=0x04 hdr=0x00
none82@pci0:178:18:2:   class=0x088000 card=0x00008086 chip=0x204e8086 rev=0x04 hdr=0x00
none83@pci0:178:21:0:   class=0x088000 card=0x00008086 chip=0x20188086 rev=0x04 hdr=0x00
none84@pci0:178:22:0:   class=0x088000 card=0x00008086 chip=0x20188086 rev=0x04 hdr=0x00
none85@pci0:178:22:4:   class=0x088000 card=0x00008086 chip=0x20188086 rev=0x04 hdr=0x00
 
Ericloewe

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
Okay, your card is using the mrsas driver. I believe this is a known issue that is going to be fixed in 11.2. SMART has been wonky on mrsas cards for a while now.
 
K

Kranken

Cadet
Joined
Aug 12, 2018
Messages
3
It is option to change driver to other to fix smart?
When I try on FreeNAS-11.2-BETA2 smartd won't work and have problem with new GUI. Did you know when its plan to release stable 11.2?
 
Ericloewe

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
Kranken said:
It is option to change driver to other to fix smart?
Click to expand...
Not with that card. If you had an SAS3008-based card, you could flash it to IT mode and use the mpr driver, which works fine.
 
Elliot Dierksen

Elliot Dierksen

Guru
Joined
Dec 29, 2014
Messages
1,135
Kranken said:
It is option to change driver to other to fix smart?
Click to expand...

Not based on my experience. I was using an LSI 9271 with the drives in JBOD mode which also used the mrsas driver. The problem was the discovery process would fail resulting in an empty smartd.conf. Smartd would work if I manually hacked the file and then started smartd. I opened a bug report which was closed because IX doesn't support RAID cards, even when they are in JBOD mode. I switched to an LSI 9207 card, and the problems vanished.
 
Ericloewe

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
Wasn't it reopened? Do you have the issue number?
 
Elliot Dierksen

Elliot Dierksen

Guru
Joined
Dec 29, 2014
Messages
1,135
Ericloewe

Ericloewe

Server Wrangler
Moderator
Joined
Feb 15, 2014
Messages
20,194
Sounds like it's in the queue for backporting to 11.2.
 
Elliot Dierksen

Elliot Dierksen

Guru
Joined
Dec 29, 2014
Messages
1,135
If it matters to anybody, I have a kind of cheesy script to manually create the entries that can be appended to smartd.conf that will make it monitor disks until the next reboot.
Code:
#!/bin/sh
#

camcontrol devlist |
		grep 'scbus2.*,da[0-9]' |
		cut -f2 -d, |
		cut -f1 -d\) |
		while read drv
		do
				echo "/dev/${drv} -a -n never -W 0,0,0 -m noc@oau.org -M exec /usr/local/www/freenasUI/tools/smart_alert.py"
		done


Edit: the 'scbus2.*' stuff is specific to my use case. You would need to examine you own config to see which SCSI bus should be used for that line.
 
Status
Not open for further replies.

Similar threads

Deyan Donovski
  • Locked
smartd with LSI MegaRAID controller
Replies
2
Views
3K
SweetAndLow
SweetAndLow
NadoNate
  • Locked
Smartd won't start on T630 using H730 PERC
Replies
8
Views
3K
Ericloewe
Ericloewe
C
  • Locked
Smartd Multiple CISS Controller
Replies
2
Views
1K
chinraam
C
fahadshery
how does TrueNas selects ashift/sector size?
Replies
3
Views
1K
artlessknave
artlessknave
baby27784
identify disks serial number on Raid0 P410i
Replies
13
Views
5K
jgreco
jgreco
Top