Gday folks,
Had quite a lingering problem here.
Long story short:
-Transferring from a mounted folder to a folder which isn't mounted is ridiculously slow and tedious.
-Transmission jail folder
-Maxxes out at around 12MB/s for 1 file.
-If I try to transfer more files it makes the fileserver come to a crawl. It totals around 10-12MB/s. If I try to stream at the same time (BR over GbE) there is intermittent freezing.
-Without the jail folder mounted, transfers average 70-80MB/s.
-CPU usage isn't ridiculously high when this occurs (Reporting says 50% load tops)
Long story long:
FreeNAS-8.3.0-RELEASE-p1-x64 (r12825
AMD E350
16GB Memory
5x2TB RaidZ - 8TB Usable)
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=2099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
ether 00:25:22:bd:20:dc
inet 10.0.0.4 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:fe:4a:c8:9c:00
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 6 priority 128 path cost 20000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 11 priority 128 path cost 2000
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:f3:c0:00:0b:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
Any help is appreciated.
Cheers,
Chris
Had quite a lingering problem here.
Long story short:
-Transferring from a mounted folder to a folder which isn't mounted is ridiculously slow and tedious.
-Transmission jail folder
-Maxxes out at around 12MB/s for 1 file.
-If I try to transfer more files it makes the fileserver come to a crawl. It totals around 10-12MB/s. If I try to stream at the same time (BR over GbE) there is intermittent freezing.
-Without the jail folder mounted, transfers average 70-80MB/s.
-CPU usage isn't ridiculously high when this occurs (Reporting says 50% load tops)
Long story long:
FreeNAS-8.3.0-RELEASE-p1-x64 (r12825
AMD E350
16GB Memory
5x2TB RaidZ - 8TB Usable)
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=2099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC>
ether 00:25:22:bd:20:dc
inet 10.0.0.4 netmask 0xffffff00 broadcast 10.0.0.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:fe:4a:c8:9c:00
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 6 priority 128 path cost 20000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 11 priority 128 path cost 2000
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:f3:c0:00:0b:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
Any help is appreciated.
Cheers,
Chris