Hi all:
I just put together my second FreeNAS system (X10SRL, E5-1620, 2x Samsung 32GB DDR4 from compatibility list, all in a 4u chassis). Other than the RAM, the configuration is essentially the same as my other system. Out of the box on boot I received a "Failing DIMM: DIMM location. (Uncorrectable memory component found) (DIMMB1)" error. I swapped the dimms between DIMMA1 and DIMMB1 and the error stays with DIMMB1.
Wanted to confirm that this is adequate to trace the error to the system board and exclude the RAM. At this point, is it worth further troubleshooting or should I RMA the board? I know some equipment arrives DOA, but this would be my first experience with it, hence the caution.
Thanks for all your help,
Anand
I just put together my second FreeNAS system (X10SRL, E5-1620, 2x Samsung 32GB DDR4 from compatibility list, all in a 4u chassis). Other than the RAM, the configuration is essentially the same as my other system. Out of the box on boot I received a "Failing DIMM: DIMM location. (Uncorrectable memory component found) (DIMMB1)" error. I swapped the dimms between DIMMA1 and DIMMB1 and the error stays with DIMMB1.
Wanted to confirm that this is adequate to trace the error to the system board and exclude the RAM. At this point, is it worth further troubleshooting or should I RMA the board? I know some equipment arrives DOA, but this would be my first experience with it, hence the caution.
Thanks for all your help,
Anand