Hello, the first thing to say hello to you all since I just registered in the forum.
I have a Dell PowerEdge T110 server with a Dell SAS Perc H200A controller that apparently works fine, since I have generated a 24Tb logical volume (6Tb x 4 hdd) and mount and access it without problem, but I cannot get the controller to report the status SMART of the disks. I have tried both OpenMediaVault and Ubuntu but neither is able to read SMART values from connected disks.
In the bios of the controller there is an option that allows disabling the sending of SMART notifications but I have it disabled. If I run a smartctl it tells me the following:
Errors: da0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE-p2 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org Short offline self test failed [unsupported field in scsi command]
Server configuration:
Dell PowerEdge T110
I have a Dell PowerEdge T110 server with a Dell SAS Perc H200A controller that apparently works fine, since I have generated a 24Tb logical volume (6Tb x 4 hdd) and mount and access it without problem, but I cannot get the controller to report the status SMART of the disks. I have tried both OpenMediaVault and Ubuntu but neither is able to read SMART values from connected disks.
In the bios of the controller there is an option that allows disabling the sending of SMART notifications but I have it disabled. If I run a smartctl it tells me the following:
Errors: da0 smartctl 7.1 2019-12-30 r5022 [FreeBSD 12.2-RELEASE-p2 amd64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org Short offline self test failed [unsupported field in scsi command]
Server configuration:
Dell PowerEdge T110
8Gb RAM
IDE Internal controller1 HDD 200 Gb for TrueNAS installation
1 HDD 1Tb to download and temporary
SAS PERC H200A 4 x 6Tb HDD
Thanks a lot. a greeting