Knut Marius Westerhagen
Dabbler
- Joined
- Nov 1, 2014
- Messages
- 10
Hi
I just got a UPS powerwalker VI650 LCD ups, but can't i get tofunction with the freenas. I rund freenas 9.2.1.3
the Powerwalker VI650LCD is not listed i the UPS support, so i trying to get it to work with
PowerWalker ups 2 Line-Interactive VI 850 LCD (blazer_usb)
I have swiched on the UPS service an in the config menu chosen the driver above.
Shutdownmode is set to "when usb goes on battery"
timer "10sec"
Password and things like that is left unchanged.
When i cut the power to the ups, i get a reaction, but not what i would like to get
This is what i get.
Is there anybody out there that can help me in the right direction on how to solve this?
I am lost and i dont know where to start.
PS: i am new at linux and Freenas so please be gental
I just got a UPS powerwalker VI650 LCD ups, but can't i get tofunction with the freenas. I rund freenas 9.2.1.3
the Powerwalker VI650LCD is not listed i the UPS support, so i trying to get it to work with
PowerWalker ups 2 Line-Interactive VI 850 LCD (blazer_usb)
I have swiched on the UPS service an in the config menu chosen the driver above.
Shutdownmode is set to "when usb goes on battery"
timer "10sec"
Password and things like that is left unchanged.
When i cut the power to the ups, i get a reaction, but not what i would like to get
This is what i get.
Code:
Nov 1 20:23:06 freenas kernel: ugen0.4: <INNO TECH> at usbus0 (disconnected) Nov 1 20:23:06 freenas blazer_usb[13905]: Permissions problem: Device not configured Nov 1 20:23:06 freenas upsd[13907]: Can't connect to UPS [knutups] (blazer_usb-knutups): No such file or directory Nov 1 20:23:06 freenas root: Unknown USB device: vendor 0x0665 product 0x5161 bus uhub2 Nov 1 20:23:06 freenas kernel: ugen0.4: <INNO TECH> at usbus0 Nov 1 20:23:07 freenas upsmon[13932]: Poll UPS [knutups] failed - Driver not connected Nov 1 20:23:07 freenas upsmon[13932]: Communications with UPS knutups lost Nov 1 20:23:07 freenas kernel: ugen0.4: <INNO TECH> at usbus0 (disconnected) Nov 1 20:23:09 freenas kernel: uhub_reattach_port: giving up port reset - device vanished Nov 1 20:23:10 freenas kernel: uhub_reattach_port: giving up port reset - device vanished Nov 1 20:23:10 freenas kernel: usb_alloc_device: set address 4 failed (USB_ERR_STALLED, ignored) Nov 1 20:23:10 freenas kernel: usbd_setup_device_desc: getting device descriptor at addr 4 failed, USB_ERR_STALLED Nov 1 20:23:11 freenas root: Unknown USB device: vendor 0x0665 product 0x5161 bus uhub2 Nov 1 20:23:11 freenas kernel: ugen0.4: <INNO TECH> at usbus0 Nov 1 20:23:12 freenas upsmon[13932]: Poll UPS [knutups] failed - Driver not connected
Is there anybody out there that can help me in the right direction on how to solve this?
I am lost and i dont know where to start.
PS: i am new at linux and Freenas so please be gental