Jailer
Not strong, but bad
- Joined
- Sep 12, 2014
- Messages
- 4,977
Ok I've been searching for a couple days for a solution to this and I can't find anything or figure it out. I've gotten 2 email notifications the last 2 days that php-fpm has crashed but I can seem to track down where. This is both messages from the console:
There is nothing listed in /var/log to indicate any problem. There is a dmesg.today log file located in /var/log in each jail that lists the crash. But that's also the problem. If the process is crashing in a jail I don't know how to narrow down what jail.
Anyone got any ideas on how to track this down as to where the crash is occurring so I can try to figure out why it's crashing?
Hardware per the forum rules:
FreeNAS-9.3-STABLE-201605170422
Supermicro X10SL7-F
Xeon E-3 1240V3
32GB 2x Crucial ECC DDR3 1600 CT2KIT102472BD160B
6x3TB WD Greens RAIDZ2
Supermicro 16GB SATA DOM
PC Power And Cooling Turbo cool 510
Output of dmesg:
Code:
Jul 22 08:00:15 freenas kernel: pid 66255 (php-fpm), uid 80: exited on signal 11 Jul 24 02:02:38 freenas kernel: pid 38178 (php-fpm), uid 80: exited on signal 11
There is nothing listed in /var/log to indicate any problem. There is a dmesg.today log file located in /var/log in each jail that lists the crash. But that's also the problem. If the process is crashing in a jail I don't know how to narrow down what jail.
Anyone got any ideas on how to track this down as to where the crash is occurring so I can try to figure out why it's crashing?
Hardware per the forum rules:
FreeNAS-9.3-STABLE-201605170422
Supermicro X10SL7-F
Xeon E-3 1240V3
32GB 2x Crucial ECC DDR3 1600 CT2KIT102472BD160B
6x3TB WD Greens RAIDZ2
Supermicro 16GB SATA DOM
PC Power And Cooling Turbo cool 510
Output of dmesg:
Code:
[Jailer@freenas] /nonexistent# dmesg Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE-p31 #0 r288272+e7e804d: Mon May 16 21:29:59 PDT 2016 root@build3.ixsystems.com:/tank/home/stable-builds/FN/objs/os-base/amd64/tank/home/stable-builds/FN/FreeBSD/src/sys/FREENAS.amd64 amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz (3400.07-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x306c3 Family = 0x6 Model = 0x3c Stepping = 3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Standard Extended Features=0x2fbb<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,INVPCID> TSC: P-state invariant, performance statistics real memory = 34896609280 (33280 MB) avail memory = 33124737024 (31590 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ACPI Warning: FADT (revision 5) is longer than ACPI 5.0 version, truncating length 268 to 256 (20111123/tbfadt-325) ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS> on motherboard padlock0: No ACE support. acpi0: <SUPERM SMCI--MB> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0 pci2: <ACPI PCI bus> on pcib2 mps0: <Avago Technologies (LSI) SAS2308> port 0xe000-0xe0ff mem 0xf7240000-0xf724ffff,0xf7200000-0xf723ffff irq 17 at device 0.0 on pci2 mps0: Firmware: 20.00.04.00, Driver: 20.00.00.00-fbsd mps0: IOCCapabilities: 5285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> pci0: <serial bus, USB> at device 20.0 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7514000-0xf75143ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci4 vgapci0: Boot video device pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci5: <ACPI PCI bus> on pcib5 igb0: <Intel(R) PRO/1000 Network Connection 2.5.3-k> port 0xc000-0xc01f mem 0xf7400000-0xf747ffff,0xf7480000-0xf7483fff irq 18 at device 0.0 on pci5 igb0: Using MSIX interrupts with 5 vectors igb0: Ethernet address: 00:25:90:f5:b8:50 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci6: <ACPI PCI bus> on pcib6 igb1: <Intel(R) PRO/1000 Network Connection 2.5.3-k> port 0xb000-0xb01f mem 0xf7300000-0xf737ffff,0xf7380000-0xf7383fff irq 19 at device 0.0 on pci6 igb1: Using MSIX interrupts with 5 vectors igb1: Ethernet address: 00:25:90:f5:b8:51 igb1: Bound queue 0 to cpu 4 igb1: Bound queue 1 to cpu 5 igb1: Bound queue 2 to cpu 6 igb1: Bound queue 3 to cpu 7 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7513000-0xf75133ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7512000-0xf75127ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: CGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 mps0: SAS Address for SATA device = 496d3f57e8c8c18d mps0: SAS Address from SATA device = 496d3f57e8c8c18d mps0: SAS Address for SATA device = d25c4c43dfe0c591 mps0: SAS Address from SATA device = d25c4c43dfe0c591 mps0: SAS Address for SATA device = 49765d61f1d1b385 mps0: SAS Address from SATA device = 49765d61f1d1b385 mps0: SAS Address for SATA device = d25c4c3abdf5c180 mps0: SAS Address from SATA device = d25c4c3abdf5c180 mps0: SAS Address for SATA device = d25c4c36d9d3ac87 mps0: SAS Address from SATA device = d25c4c36d9d3ac87 mps0: SAS Address for SATA device = d25d3c34c4c3af73 mps0: SAS Address from SATA device = d25d3c34c4c3af73 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1 uhub2: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen0.3: <vendor 0x0000> at usbus0 uhub4: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 3> on usbus0 uhub4: 4 ports with 3 removable, self powered ugen0.4: <vendor 0x0557> at usbus0 ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 kbd0 at ukbd0 ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <SATA SSD S9FM01.6> ATA-10 SATA 3.x device ada0: Serial Number 96D707431E2400018519 ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 15272MB (31277232 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 da0 at mps0 bus 0 scbus0 target 0 lun 0 da0: <ATA WDC WD30EZRX-00S 0A80> Fixed Direct Access SCSI-6 device da0: Serial Number WD-WCC4EA7FEAFP da0: 600.000MB/s transfers da0: Command Queueing enabled da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da0: quirks=0x8<4K> da1 at mps0 bus 0 scbus0 target 1 lun 0 da1: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device da1: Serial Number WD-WMC4N0DATDJT da1: 600.000MB/s transfers da1: Command Queueing enabled da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da1: quirks=0x8<4K> da2 at mps0 bus 0 scbus0 target 2 lun 0 da2: <ATA WDC WD30EZRX-00S 0A80> Fixed Direct Access SCSI-6 device da2: Serial Number WD-WCC4EJUPNJ8H da2: 600.000MB/s transfers da2: Command Queueing enabled da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da2: quirks=0x8<4K> da3 at mps0 bus 0 scbus0 target 3 lun 0 da3: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device da3: Serial Number WD-WMC4N0D82YFC da3: 600.000MB/s transfers da3: Command Queueing enabled da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da3: quirks=0x8<4K> da4 at mps0 bus 0 scbus0 target 4 lun 0 da4: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device da4: Serial Number WD-WMC4N0D4N71J da4: 600.000MB/s transfers da4: Command Queueing enabled da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da4: quirks=0x8<4K> da5 at mps0 bus 0 scbus0 target 5 lun 0 da5: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device da5: Serial Number WD-WCC4N1429146 da5: 600.000MB/s transfers da5: Command Queueing enabled da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C) da5: quirks=0x8<4K> SMP: AP CPU #1 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1700036102 Hz quality 1000 Trying to mount root from zfs:freenas-boot/ROOT/FreeNAS-9.3-STABLE-201605170422 []... GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi ipmi0: IPMI device rev. 1, firmware rev. 1.42, version 2.0 ipmi0: Number of channels 2 ipmi0: Attached watchdog wbwd0: HEFRAS and EFER do not align: EFER 0x4e DevID 0x00 DevRev 0x00 CR26 0x00 GEOM_ELI: Device da3p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da2p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da5p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device da4p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware vboxdrv: fAsync=0 offMin=0x2cd offMax=0x1056 bridge0: Ethernet address: 02:3a:9d:2f:a0:00 bridge0: link state changed to UP igb1: promiscuous mode enabled epair0a: Ethernet address: 02:31:3b:00:08:0a epair0b: Ethernet address: 02:31:3b:00:09:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled igb1: link state changed to DOWN ng_ether_ifnet_arrival_event: can't re-name node epair0b igb1: link state changed to UP epair1a: Ethernet address: 02:e5:1e:00:09:0a epair1b: Ethernet address: 02:e5:1e:00:0a:0b epair1a: link state changed to UP epair1b: link state changed to UP epair1a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair1b epair2a: Ethernet address: 02:51:25:00:0a:0a epair2b: Ethernet address: 02:51:25:00:0b:0b epair2a: link state changed to UP epair2b: link state changed to UP epair2a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair2b epair3a: Ethernet address: 02:82:23:00:0b:0a epair3b: Ethernet address: 02:82:23:00:0c:0b epair3a: link state changed to UP epair3b: link state changed to UP epair3a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair3b epair4a: Ethernet address: 02:85:23:00:0c:0a epair4b: Ethernet address: 02:85:23:00:0d:0b epair4a: link state changed to UP epair4b: link state changed to UP epair4a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair4b epair5a: Ethernet address: 02:e3:2b:00:0d:0a epair5b: Ethernet address: 02:e3:2b:00:0e:0b epair5a: link state changed to UP epair5b: link state changed to UP epair5a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair5b epair6a: Ethernet address: 02:36:fd:00:0e:0a epair6b: Ethernet address: 02:36:fd:00:0f:0b epair6a: link state changed to UP epair6b: link state changed to UP epair6a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair6b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b epair7a: Ethernet address: 02:22:7c:00:0f:0a epair7b: Ethernet address: 02:22:7c:00:10:0b epair7a: link state changed to UP epair7b: link state changed to UP epair7a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair7b arp: 192.168.0.200 moved from 02:22:7c:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:22:7c:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b epair7a: link state changed to DOWN epair7b: link state changed to DOWN ifa_del_loopback_route: deletion failed Freed UMA keg (udp_inpcb) was not empty (80 items). Lost 8 pages of memory. Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory. Freed UMA keg (tcptw) was not empty (400 items). Lost 8 pages of memory. Freed UMA keg (tcp_inpcb) was not empty (120 items). Lost 12 pages of memory. Freed UMA keg (tcpcb) was not empty (56 items). Lost 14 pages of memory. hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b epair7a: Ethernet address: 02:f9:fc:00:0f:0a epair7b: Ethernet address: 02:f9:fc:00:10:0b epair7a: link state changed to UP epair7b: link state changed to UP epair7a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair7b arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b igb1: link state changed to DOWN igb1: link state changed to UP epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair2a: Ethernet address: 02:61:7f:00:0a:0a epair2b: Ethernet address: 02:61:7f:00:10:0b epair2a: link state changed to UP epair2b: link state changed to UP epair2a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair2b ifa_del_loopback_route: deletion failed Freed UMA keg (udp_inpcb) was not empty (80 items). Lost 8 pages of memory. Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory. Freed UMA keg (tcptw) was not empty (350 items). Lost 7 pages of memory. Freed UMA keg (tcp_inpcb) was not empty (100 items). Lost 10 pages of memory. Freed UMA keg (tcpcb) was not empty (48 items). Lost 12 pages of memory. Freed UMA keg (ripcb) was not empty (70 items). Lost 7 pages of memory. hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required epair8a: Ethernet address: 02:56:b5:00:10:0a epair8b: Ethernet address: 02:56:b5:00:11:0b epair8a: link state changed to UP epair8b: link state changed to UP epair8a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair8b epair0a: link state changed to DOWN epair0b: link state changed to DOWN ifa_del_loopback_route: deletion failed Freed UMA keg (udp_inpcb) was not empty (80 items). Lost 8 pages of memory. Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory. Freed UMA keg (tcptw) was not empty (400 items). Lost 8 pages of memory. Freed UMA keg (tcp_inpcb) was not empty (110 items). Lost 11 pages of memory. Freed UMA keg (sackhole) was not empty (606 items). Lost 6 pages of memory. Freed UMA keg (tcpcb) was not empty (60 items). Lost 15 pages of memory. Freed UMA keg (ripcb) was not empty (80 items). Lost 8 pages of memory. hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required epair0a: Ethernet address: 02:c3:f5:00:08:0a epair0b: Ethernet address: 02:c3:f5:00:11:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair0b epair9a: Ethernet address: 02:47:f5:00:11:0a epair9b: Ethernet address: 02:47:f5:00:12:0b epair9a: link state changed to UP epair9b: link state changed to UP epair9a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair9b Limiting closed port RST response from 207 to 200 packets/sec epair4a: link state changed to DOWN epair4b: link state changed to DOWN ifa_del_loopback_route: deletion failed Freed UMA keg (udp_inpcb) was not empty (160 items). Lost 16 pages of memory. Freed UMA keg (udpcb) was not empty (1344 items). Lost 8 pages of memory. Freed UMA keg (tcptw) was not empty (5000 items). Lost 100 pages of memory. Freed UMA keg (tcp_inpcb) was not empty (4700 items). Lost 470 pages of memory. Freed UMA keg (sackhole) was not empty (909 items). Lost 9 pages of memory. Freed UMA keg (tcpcb) was not empty (112 items). Lost 28 pages of memory. Freed UMA keg (ripcb) was not empty (80 items). Lost 8 pages of memory. hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required epair4a: Ethernet address: 02:33:44:00:0c:0a epair4b: Ethernet address: 02:33:44:00:12:0b epair4a: link state changed to UP epair4b: link state changed to UP epair4a: promiscuous mode enabled ng_ether_ifnet_arrival_event: can't re-name node epair4b pid 66255 (php-fpm), uid 80: exited on signal 11 pid 38178 (php-fpm), uid 80: exited on signal 11 epair4a: link state changed to DOWN epair4b: link state changed to DOWN ifa_del_loopback_route: deletion failed Freed UMA keg (udp_inpcb) was not empty (90 items). Lost 9 pages of memory. Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory. Freed UMA keg (tcptw) was not empty (250 items). Lost 5 pages of memory. Freed UMA keg (tcp_inpcb) was not empty (90 items). Lost 9 pages of memory. Freed UMA keg (tcpcb) was not empty (48 items). Lost 12 pages of memory. Freed UMA keg (ripcb) was not empty (80 items). Lost 8 pages of memory. hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required