Jailer
Not strong, but bad
- Joined
- Sep 12, 2014
- Messages
- 4,977
Ok I've been searching for a couple days for a solution to this and I can't find anything or figure it out. I've gotten 2 email notifications the last 2 days that php-fpm has crashed but I can seem to track down where. This is both messages from the console:
There is nothing listed in /var/log to indicate any problem. There is a dmesg.today log file located in /var/log in each jail that lists the crash. But that's also the problem. If the process is crashing in a jail I don't know how to narrow down what jail.
Anyone got any ideas on how to track this down as to where the crash is occurring so I can try to figure out why it's crashing?
Hardware per the forum rules:
FreeNAS-9.3-STABLE-201605170422
Supermicro X10SL7-F
Xeon E-3 1240V3
32GB 2x Crucial ECC DDR3 1600 CT2KIT102472BD160B
6x3TB WD Greens RAIDZ2
Supermicro 16GB SATA DOM
PC Power And Cooling Turbo cool 510
Output of dmesg:
Code:
Jul 22 08:00:15 freenas kernel: pid 66255 (php-fpm), uid 80: exited on signal 11 Jul 24 02:02:38 freenas kernel: pid 38178 (php-fpm), uid 80: exited on signal 11
There is nothing listed in /var/log to indicate any problem. There is a dmesg.today log file located in /var/log in each jail that lists the crash. But that's also the problem. If the process is crashing in a jail I don't know how to narrow down what jail.
Anyone got any ideas on how to track this down as to where the crash is occurring so I can try to figure out why it's crashing?
Hardware per the forum rules:
FreeNAS-9.3-STABLE-201605170422
Supermicro X10SL7-F
Xeon E-3 1240V3
32GB 2x Crucial ECC DDR3 1600 CT2KIT102472BD160B
6x3TB WD Greens RAIDZ2
Supermicro 16GB SATA DOM
PC Power And Cooling Turbo cool 510
Output of dmesg:
Code:
[Jailer@freenas] /nonexistent# dmesg
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p31 #0 r288272+e7e804d: Mon May 16 21:29:59 PDT 2016
root@build3.ixsystems.com:/tank/home/stable-builds/FN/objs/os-base/amd64/tank/home/stable-builds/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz (3400.07-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306c3 Family = 0x6 Model = 0x3c Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Standard Extended Features=0x2fbb<GSFSBASE,TSCADJ,SMEP,ENHMOVSB,INVPCID>
TSC: P-state invariant, performance statistics
real memory = 34896609280 (33280 MB)
avail memory = 33124737024 (31590 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI Warning: FADT (revision 5) is longer than ACPI 5.0 version, truncating length 268 to 256 (20111123/tbfadt-325)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2308> port 0xe000-0xe0ff mem 0xf7240000-0xf724ffff,0xf7200000-0xf723ffff irq 17 at device 0.0 on pci2
mps0: Firmware: 20.00.04.00, Driver: 20.00.00.00-fbsd
mps0: IOCCapabilities: 5285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
pci0: <serial bus, USB> at device 20.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7514000-0xf75143ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci4
vgapci0: Boot video device
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib5
igb0: <Intel(R) PRO/1000 Network Connection 2.5.3-k> port 0xc000-0xc01f mem 0xf7400000-0xf747ffff,0xf7480000-0xf7483fff irq 18 at device 0.0 on pci5
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: 00:25:90:f5:b8:50
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib6
igb1: <Intel(R) PRO/1000 Network Connection 2.5.3-k> port 0xb000-0xb01f mem 0xf7300000-0xf737ffff,0xf7380000-0xf7383fff irq 19 at device 0.0 on pci6
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: 00:25:90:f5:b8:51
igb1: Bound queue 0 to cpu 4
igb1: Bound queue 1 to cpu 5
igb1: Bound queue 2 to cpu 6
igb1: Bound queue 3 to cpu 7
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7513000-0xf75133ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7512000-0xf75127ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mps0: SAS Address for SATA device = 496d3f57e8c8c18d
mps0: SAS Address from SATA device = 496d3f57e8c8c18d
mps0: SAS Address for SATA device = d25c4c43dfe0c591
mps0: SAS Address from SATA device = d25c4c43dfe0c591
mps0: SAS Address for SATA device = 49765d61f1d1b385
mps0: SAS Address from SATA device = 49765d61f1d1b385
mps0: SAS Address for SATA device = d25c4c3abdf5c180
mps0: SAS Address from SATA device = d25c4c3abdf5c180
mps0: SAS Address for SATA device = d25c4c36d9d3ac87
mps0: SAS Address from SATA device = d25c4c36d9d3ac87
mps0: SAS Address for SATA device = d25d3c34c4c3af73
mps0: SAS Address from SATA device = d25d3c34c4c3af73
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <vendor 0x0000> at usbus0
uhub4: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 3> on usbus0
uhub4: 4 ports with 3 removable, self powered
ugen0.4: <vendor 0x0557> at usbus0
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
kbd0 at ukbd0
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <SATA SSD S9FM01.6> ATA-10 SATA 3.x device
ada0: Serial Number 96D707431E2400018519
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 15272MB (31277232 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
da0 at mps0 bus 0 scbus0 target 0 lun 0
da0: <ATA WDC WD30EZRX-00S 0A80> Fixed Direct Access SCSI-6 device
da0: Serial Number WD-WCC4EA7FEAFP
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da0: quirks=0x8<4K>
da1 at mps0 bus 0 scbus0 target 1 lun 0
da1: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device
da1: Serial Number WD-WMC4N0DATDJT
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da1: quirks=0x8<4K>
da2 at mps0 bus 0 scbus0 target 2 lun 0
da2: <ATA WDC WD30EZRX-00S 0A80> Fixed Direct Access SCSI-6 device
da2: Serial Number WD-WCC4EJUPNJ8H
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da2: quirks=0x8<4K>
da3 at mps0 bus 0 scbus0 target 3 lun 0
da3: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device
da3: Serial Number WD-WMC4N0D82YFC
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da3: quirks=0x8<4K>
da4 at mps0 bus 0 scbus0 target 4 lun 0
da4: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device
da4: Serial Number WD-WMC4N0D4N71J
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da4: quirks=0x8<4K>
da5 at mps0 bus 0 scbus0 target 5 lun 0
da5: <ATA WDC WD30EZRX-00D 0A80> Fixed Direct Access SCSI-6 device
da5: Serial Number WD-WCC4N1429146
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da5: quirks=0x8<4K>
SMP: AP CPU #1 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 1700036102 Hz quality 1000
Trying to mount root from zfs:freenas-boot/ROOT/FreeNAS-9.3-STABLE-201605170422 []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
ipmi0: IPMI device rev. 1, firmware rev. 1.42, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
wbwd0: HEFRAS and EFER do not align: EFER 0x4e DevID 0x00 DevRev 0x00 CR26 0x00
GEOM_ELI: Device da3p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device da2p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device da1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device da0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device da5p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device da4p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: hardware
vboxdrv: fAsync=0 offMin=0x2cd offMax=0x1056
bridge0: Ethernet address: 02:3a:9d:2f:a0:00
bridge0: link state changed to UP
igb1: promiscuous mode enabled
epair0a: Ethernet address: 02:31:3b:00:08:0a
epair0b: Ethernet address: 02:31:3b:00:09:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
igb1: link state changed to DOWN
ng_ether_ifnet_arrival_event: can't re-name node epair0b
igb1: link state changed to UP
epair1a: Ethernet address: 02:e5:1e:00:09:0a
epair1b: Ethernet address: 02:e5:1e:00:0a:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair1b
epair2a: Ethernet address: 02:51:25:00:0a:0a
epair2b: Ethernet address: 02:51:25:00:0b:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair2b
epair3a: Ethernet address: 02:82:23:00:0b:0a
epair3b: Ethernet address: 02:82:23:00:0c:0b
epair3a: link state changed to UP
epair3b: link state changed to UP
epair3a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair3b
epair4a: Ethernet address: 02:85:23:00:0c:0a
epair4b: Ethernet address: 02:85:23:00:0d:0b
epair4a: link state changed to UP
epair4b: link state changed to UP
epair4a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair4b
epair5a: Ethernet address: 02:e3:2b:00:0d:0a
epair5b: Ethernet address: 02:e3:2b:00:0e:0b
epair5a: link state changed to UP
epair5b: link state changed to UP
epair5a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair5b
epair6a: Ethernet address: 02:36:fd:00:0e:0a
epair6b: Ethernet address: 02:36:fd:00:0f:0b
epair6a: link state changed to UP
epair6b: link state changed to UP
epair6a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair6b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
epair7a: Ethernet address: 02:22:7c:00:0f:0a
epair7b: Ethernet address: 02:22:7c:00:10:0b
epair7a: link state changed to UP
epair7b: link state changed to UP
epair7a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair7b
arp: 192.168.0.200 moved from 02:22:7c:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:22:7c:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
epair7a: link state changed to DOWN
epair7b: link state changed to DOWN
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (80 items). Lost 8 pages of memory.
Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory.
Freed UMA keg (tcptw) was not empty (400 items). Lost 8 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (120 items). Lost 12 pages of memory.
Freed UMA keg (tcpcb) was not empty (56 items). Lost 14 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
epair7a: Ethernet address: 02:f9:fc:00:0f:0a
epair7b: Ethernet address: 02:f9:fc:00:10:0b
epair7a: link state changed to UP
epair7b: link state changed to UP
epair7a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair7b
arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
arp: 192.168.0.200 moved from 02:f9:fc:00:0f:0a to 00:25:90:f5:b8:51 on epair7b
arp: 192.168.0.200 moved from 02:85:23:00:0c:0a to 00:25:90:f5:b8:51 on epair4b
igb1: link state changed to DOWN
igb1: link state changed to UP
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: Ethernet address: 02:61:7f:00:0a:0a
epair2b: Ethernet address: 02:61:7f:00:10:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair2b
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (80 items). Lost 8 pages of memory.
Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory.
Freed UMA keg (tcptw) was not empty (350 items). Lost 7 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (100 items). Lost 10 pages of memory.
Freed UMA keg (tcpcb) was not empty (48 items). Lost 12 pages of memory.
Freed UMA keg (ripcb) was not empty (70 items). Lost 7 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
epair8a: Ethernet address: 02:56:b5:00:10:0a
epair8b: Ethernet address: 02:56:b5:00:11:0b
epair8a: link state changed to UP
epair8b: link state changed to UP
epair8a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair8b
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (80 items). Lost 8 pages of memory.
Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory.
Freed UMA keg (tcptw) was not empty (400 items). Lost 8 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (110 items). Lost 11 pages of memory.
Freed UMA keg (sackhole) was not empty (606 items). Lost 6 pages of memory.
Freed UMA keg (tcpcb) was not empty (60 items). Lost 15 pages of memory.
Freed UMA keg (ripcb) was not empty (80 items). Lost 8 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
epair0a: Ethernet address: 02:c3:f5:00:08:0a
epair0b: Ethernet address: 02:c3:f5:00:11:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair0b
epair9a: Ethernet address: 02:47:f5:00:11:0a
epair9b: Ethernet address: 02:47:f5:00:12:0b
epair9a: link state changed to UP
epair9b: link state changed to UP
epair9a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair9b
Limiting closed port RST response from 207 to 200 packets/sec
epair4a: link state changed to DOWN
epair4b: link state changed to DOWN
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (160 items). Lost 16 pages of memory.
Freed UMA keg (udpcb) was not empty (1344 items). Lost 8 pages of memory.
Freed UMA keg (tcptw) was not empty (5000 items). Lost 100 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (4700 items). Lost 470 pages of memory.
Freed UMA keg (sackhole) was not empty (909 items). Lost 9 pages of memory.
Freed UMA keg (tcpcb) was not empty (112 items). Lost 28 pages of memory.
Freed UMA keg (ripcb) was not empty (80 items). Lost 8 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
epair4a: Ethernet address: 02:33:44:00:0c:0a
epair4b: Ethernet address: 02:33:44:00:12:0b
epair4a: link state changed to UP
epair4b: link state changed to UP
epair4a: promiscuous mode enabled
ng_ether_ifnet_arrival_event: can't re-name node epair4b
pid 66255 (php-fpm), uid 80: exited on signal 11
pid 38178 (php-fpm), uid 80: exited on signal 11
epair4a: link state changed to DOWN
epair4b: link state changed to DOWN
ifa_del_loopback_route: deletion failed
Freed UMA keg (udp_inpcb) was not empty (90 items). Lost 9 pages of memory.
Freed UMA keg (udpcb) was not empty (1008 items). Lost 6 pages of memory.
Freed UMA keg (tcptw) was not empty (250 items). Lost 5 pages of memory.
Freed UMA keg (tcp_inpcb) was not empty (90 items). Lost 9 pages of memory.
Freed UMA keg (tcpcb) was not empty (48 items). Lost 12 pages of memory.
Freed UMA keg (ripcb) was not empty (80 items). Lost 8 pages of memory.
hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
