Jacopx
Patron
- Joined
- Feb 19, 2016
- Messages
- 367
Buongiorno a tutti! ;)
I have a problem with a disk of my RAID-Z2, are some months the there are 5 pending sectors and I have tried to solve this problem in several ways but without success. This are the SMART results:
Some one can help me? I already have a new disk for the substitution but I want't to use the one that il already online but with errors.
I have a problem with a disk of my RAID-Z2, are some months the there are 5 pending sectors and I have tried to solve this problem in several ways but without success. This are the SMART results:
Code:
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WCC4N5FYYJZU LU WWN Device Id: 5 0014ee 2b7e44ae6 Firmware Version: 82.00A82 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Apr 27 13:55:01 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (39600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 398) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 191 191 051 Pre-fail Always - 107386 3 Spin_Up_Time 0x0027 178 176 021 Pre-fail Always - 6066 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 309 5 Reallocated_Sector_Ct 0x0033 161 161 140 Pre-fail Always - 1170 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3493 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 285 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 35 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 548 194 Temperature_Celsius 0x0022 123 115 000 Old_age Always - 27 196 Reallocated_Event_Count 0x0032 170 170 000 Old_age Always - 30 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 186 180 000 Old_age Offline - 5730 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3255 - # 2 Short offline Completed without error 00% 3236 - # 3 Short offline Completed without error 00% 3216 - # 4 Short offline Completed without error 00% 3192 - # 5 Short offline Completed without error 00% 3191 - # 6 Short offline Completed without error 00% 3173 - # 7 Short offline Completed without error 00% 3160 - # 8 Short offline Completed: read failure 10% 3144 1400349888 # 9 Short offline Completed: read failure 10% 3142 1400349888 #10 Short offline Completed: read failure 10% 3127 1400349888 #11 Short offline Completed without error 00% 3113 - #12 Short offline Completed: read failure 10% 3098 1400349888 #13 Short offline Completed without error 00% 3079 - #14 Short offline Completed without error 00% 3061 - #15 Short offline Completed: read failure 10% 3037 1400349888 #16 Extended offline Completed: read failure 10% 2938 1400349888 #17 Extended offline Completed: read failure 10% 2868 1400349888 #18 Short offline Completed: read failure 10% 2859 1400349888 #19 Extended offline Completed: read failure 10% 2850 1400349888 #20 Short offline Interrupted (host reset) 90% 2826 - #21 Extended offline Completed: read failure 10% 2820 1400225496 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Some one can help me? I already have a new disk for the substitution but I want't to use the one that il already online but with errors.