Lee Spangler
Dabbler
- Joined
- Sep 30, 2014
- Messages
- 26
I am working on my Christmas Holiday project. I have managed to get a Windows VM with PCI Passthrough with a USB controller running. However, it is not very stable. I thought I had used a USB controller that would run well in such a setup, but perhaps that is not the case.
Here is the device entry:
Does anyone have a recommendation for a different USB Controller?
Just in case - there are instances where the VM recognizes the controller - and other times when the controller is not recognized (see below for one unrecognized instance):
Other times, the controller is recognized and devices can be added and recognized.
If anyone has solved a similar circumstance with a bios setting or some such rather than a different controller, I would be most interested.
Happy Holidays, and any insight is helpful!
-LeeTXJD
Here is the device entry:
Does anyone have a recommendation for a different USB Controller?
Just in case - there are instances where the VM recognizes the controller - and other times when the controller is not recognized (see below for one unrecognized instance):
Other times, the controller is recognized and devices can be added and recognized.
If anyone has solved a similar circumstance with a bios setting or some such rather than a different controller, I would be most interested.
Happy Holidays, and any insight is helpful!
-LeeTXJD