Good evening everyone, I'm having a bit of a problem with my new Freenas setup. I'm still waiting for the 6th hard disk to arrive and in the mean time I'm testing it out with the 5 I have in a RAIDZ1. Currently I haven't changed much in the settings other than starting CIFS, and setting up the CIFS shares. I transferred a recording (.wtv) from my media library on my old server over to the new Freenas and started watching it on a desktop machine using J River Media Center. Everything was fine until I started skipping around in the file, the video started to get a little jittery but recovers. When I checked the KVM console I've got the following error:
(ada2:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 00 00 4a 41 40 01 00 01 00 00
(ada2:ahcich3:0:0:0): Retrying command
and this repeats twice more.
The numbers change depending on where I am in the file, but it's always ADA2 that has the problem and this disk only had very little use before I noticed the error. I can easily recreate the error. I ran a short and a long smartctl test and they didn't detect any problems. Here is the output of smartctl:
Even more weird is if I watch the recording normally without skipping around it doesn't throw any errors at all. Any ideas?
EDIT: I tried reseating the cable but that didn't help.
EDIT2: Probably should have given some hardware/software info:
Machine is based on a Supermicro x10slm w/ Xeon 1230v3
16gb (4x4gb) Kingston ECC unbuffered memory, labeled KVR16E11S8/4. I recall that 3 of the sticks the chips that were branded as Kingston, and one of the sticks had chips that were branded Hynix.
Onboard Intel disk controller is used
Onboard NIC's are used
5x HGST Deskstar 4tb 7200rpm HD's
Sandisk 16gb USB drive for the OS
Machine doesn't have any expansion cards installed
The disk in question is NOT in a hotswap bay, 3/5 disks are in hotswap bays
All hardware is brand new
Running the latest Freenas 9.2.1.7
(ada2:ahcich3:0:0:0): READ_FPDMA_QUEUED. ACB: 60 00 00 4a 41 40 01 00 01 00 00
(ada2:ahcich3:0:0:0): Retrying command
and this repeats twice more.
The numbers change depending on where I am in the file, but it's always ADA2 that has the problem and this disk only had very little use before I noticed the error. I can easily recreate the error. I ran a short and a long smartctl test and they didn't detect any problems. Here is the output of smartctl:
Code:
[brandon@freenas] /# smartctl -a -q noserial /dev/ada2 smartctl 6.2 2013-07-26 r3841 [FreeBSD 9.2-RELEASE-p10 amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: HGST HDS724040ALE640 Firmware Version: MJAOA580 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 27 18:59:42 2014 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 24) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 583) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 81 3 Spin_Up_Time 0x0007 131 131 024 Pre-fail Always - 614 (Average 561) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 17 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 121 121 020 Pre-fail Offline - 34 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 502 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 3840 193 Load_Cycle_Count 0x0012 097 097 000 Old_age Always - 3840 194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 21/39) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 5 SMART Error Log Version: 1 ATA Error Count: 5 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 5 occurred at disk power-on lifetime: 463 hours (19 days + 7 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 bf ff 4d 01 Error: ICRC, ABRT at LBA = 0x014dffbf = 21888959 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 40 e8 80 ff 4d 40 00 04:30:13.188 READ FPDMA QUEUED 60 40 e8 00 ff 4d 40 00 04:30:13.188 READ FPDMA QUEUED 60 40 e8 80 fe 4d 40 00 04:30:13.188 READ FPDMA QUEUED 60 40 e8 c0 fe 4d 40 00 04:30:13.187 READ FPDMA QUEUED 60 40 e8 40 fe 4d 40 00 04:30:13.187 READ FPDMA QUEUED Error 4 occurred at disk power-on lifetime: 463 hours (19 days + 7 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 d1 6f 9a 3e 01 Error: ICRC, ABRT at LBA = 0x013e9a6f = 20879983 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 d0 70 9a 3e 41 ff 04:25:36.381 READ FPDMA QUEUED 60 00 08 40 9b 3e 40 00 04:25:36.380 READ FPDMA QUEUED 60 00 00 40 9a 3e 40 00 04:25:36.380 READ FPDMA QUEUED 60 00 f8 40 99 3e 40 00 04:25:36.380 READ FPDMA QUEUED 60 c0 f0 80 98 3e 40 00 04:25:36.379 READ FPDMA QUEUED Error 3 occurred at disk power-on lifetime: 463 hours (19 days + 7 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 d1 6f 43 fa 00 Error: ICRC, ABRT at LBA = 0x00fa436f = 16401263 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 98 40 44 fa 40 00 03:51:45.041 READ FPDMA QUEUED 60 00 90 40 43 fa 40 00 03:51:45.040 READ FPDMA QUEUED 60 00 88 40 42 fa 40 00 03:51:45.040 READ FPDMA QUEUED 60 00 80 40 41 fa 40 00 03:51:45.040 READ FPDMA QUEUED 60 00 78 40 40 fa 40 00 03:51:45.040 READ FPDMA QUEUED Error 2 occurred at disk power-on lifetime: 463 hours (19 days + 7 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 41 7f f7 f2 00 Error: ICRC, ABRT at LBA = 0x00f2f77f = 15923071 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 d8 c0 f7 f2 40 00 03:49:53.482 READ FPDMA QUEUED 60 00 d0 c0 f6 f2 40 00 03:49:53.482 READ FPDMA QUEUED 60 00 c8 c0 f5 f2 40 00 03:49:53.481 READ FPDMA QUEUED 60 00 c0 c0 f4 f2 40 00 03:49:53.479 READ FPDMA QUEUED 60 00 b8 c0 f3 f2 40 00 03:49:53.479 READ FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 5 hours (0 days + 5 hours) When the command that caused the error occurred, the device was active or idle . After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 17 1b 57 00 Error: ICRC, ABRT at LBA = 0x00571b17 = 5708567 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 80 00 17 1b 57 40 ff 05:41:29.059 READ FPDMA QUEUED 60 80 e8 a0 1b 57 40 00 05:41:29.058 READ FPDMA QUEUED 60 80 e0 98 1a 57 40 00 05:41:29.058 READ FPDMA QUEUED 60 80 d8 90 19 57 40 00 05:41:29.058 READ FPDMA QUEUED 60 80 d0 88 18 57 40 00 05:41:29.058 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA _of_first_error # 1 Extended offline Completed without error 00% 473 - # 2 Extended offline Aborted by host 90% 464 - # 3 Short offline Completed without error 00% 464 - # 4 Extended offline Aborted by host 90% 464 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Even more weird is if I watch the recording normally without skipping around it doesn't throw any errors at all. Any ideas?
EDIT: I tried reseating the cable but that didn't help.
EDIT2: Probably should have given some hardware/software info:
Machine is based on a Supermicro x10slm w/ Xeon 1230v3
16gb (4x4gb) Kingston ECC unbuffered memory, labeled KVR16E11S8/4. I recall that 3 of the sticks the chips that were branded as Kingston, and one of the sticks had chips that were branded Hynix.
Onboard Intel disk controller is used
Onboard NIC's are used
5x HGST Deskstar 4tb 7200rpm HD's
Sandisk 16gb USB drive for the OS
Machine doesn't have any expansion cards installed
The disk in question is NOT in a hotswap bay, 3/5 disks are in hotswap bays
All hardware is brand new
Running the latest Freenas 9.2.1.7
Last edited: