Hi,
I'm using 256 GB Sandisk SSD for the jail, But now I want to create a mirror for it.
As you may know this is very easy with boot volume. Just add another usb and use attach command and voila, now your boot volume is mirrored instead of a stripe.
Now is there any easy way to do this for the jail disk also? I also attached another 256 GB SSD, and trying to mirror on to it.
I searched through forum, but as far as I can see there is no easy way to do this.
Here is the configuration:
Just ignore feature line. My pool is created on 9.x and I'm using 11 right now.
I'm using 256 GB Sandisk SSD for the jail, But now I want to create a mirror for it.
As you may know this is very easy with boot volume. Just add another usb and use attach command and voila, now your boot volume is mirrored instead of a stripe.
Now is there any easy way to do this for the jail disk also? I also attached another 256 GB SSD, and trying to mirror on to it.
I searched through forum, but as far as I can see there is no easy way to do this.
Here is the configuration:
Code:
pool: jail state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not support the features. See zpool-features(7) for details. scan: scrub repaired 0 in 0h9m with 0 errors on Sun Jul 30 00:09:23 2017 config: NAME STATE READ WRITE CKSUM jail ONLINE 0 0 0 gptid/46c58489-f1f0-11e5-8051-d05099c089a6 ONLINE 0 0 0
Just ignore feature line. My pool is created on 9.x and I'm using 11 right now.